Microsemi Corporation
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
JANTX1N4117D-1
Lihat Butiran Helaian data

JANTX1N4117D-1

Introduction

The JANTX1N4117D-1 is a semiconductor diode that belongs to the category of rectifier diodes. It is commonly used in electronic circuits for its specific characteristics and performance.

Basic Information Overview

  • Category: Rectifier Diode
  • Use: Used in electronic circuits for rectification purposes
  • Characteristics: High current capability, low forward voltage drop
  • Package: DO-35 (Glass Axial)
  • Essence: Efficient rectification of alternating current to direct current
  • Packaging/Quantity: Typically packaged in reels or tubes, quantity varies based on manufacturer

Specifications

  • Maximum Forward Voltage: 1V
  • Maximum Reverse Voltage: 100V
  • Maximum Average Rectified Current: 1A
  • Operating Temperature Range: -65°C to +175°C

Detailed Pin Configuration

The JANTX1N4117D-1 has a two-pin configuration with anode and cathode terminals. The physical layout consists of a cylindrical glass body with leads extending from each end.

Functional Features

The diode operates as a unidirectional current flow device, allowing current to pass through when the anode is at a higher potential than the cathode. It efficiently converts alternating current into direct current by only allowing current flow in one direction.

Advantages and Disadvantages

Advantages

  • High current capability
  • Low forward voltage drop
  • Reliable rectification performance

Disadvantages

  • Limited reverse voltage tolerance
  • Sensitive to temperature variations

Working Principles

The JANTX1N4117D-1 operates based on the principle of semiconductor junction behavior. When a positive voltage is applied to the anode with respect to the cathode, the diode conducts current, allowing it to act as a rectifier. Conversely, when a negative voltage is applied, the diode blocks current flow.

Detailed Application Field Plans

The JANTX1N4117D-1 finds extensive use in various electronic applications, including: - Power supply units - Battery chargers - Voltage regulators - Inverters - Signal demodulation circuits

Detailed and Complete Alternative Models

  • 1N4001: Similar rectifier diode with lower current rating
  • 1N5408: Higher voltage and current rating rectifier diode
  • FR107: Fast recovery rectifier diode with different characteristics

In conclusion, the JANTX1N4117D-1 rectifier diode offers reliable rectification performance with high current capability and low forward voltage drop. Its application spans across diverse electronic circuits, making it a crucial component in power supply and voltage regulation systems.

Word count: 410

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi JANTX1N4117D-1 dalam penyelesaian teknikal

  1. What is the JANTX1N4117D-1 diode used for?

    • The JANTX1N4117D-1 diode is commonly used for voltage regulation, surge protection, and rectification in various technical solutions.

  2. What are the key specifications of the JANTX1N4117D-1 diode?

    • The JANTX1N4117D-1 diode is a 1A, 100V silicon rectifier with fast recovery times and low forward voltage drop.

  3. How does the JANTX1N4117D-1 diode compare to other similar diodes?

    • The JANTX1N4117D-1 diode offers high reliability and performance, making it suitable for demanding applications in technical solutions.

  4. Can the JANTX1N4117D-1 diode handle high temperatures?

    • Yes, the JANTX1N4117D-1 diode is designed to operate reliably at elevated temperatures, making it suitable for harsh environments.

  5. In what types of circuits is the JANTX1N4117D-1 diode commonly used?

    • The JANTX1N4117D-1 diode is often used in power supply circuits, voltage regulators, and electronic equipment requiring surge protection.

  6. What are the typical applications of the JANTX1N4117D-1 diode in technical solutions?

    • Typical applications include flyback diode in relay and solenoid circuits, freewheeling diode in inductive load circuits, and general rectification tasks.

  7. Does the JANTX1N4117D-1 diode require any special mounting considerations?

    • The JANTX1N4117D-1 diode can be mounted using standard methods, but attention should be paid to thermal management for high-power applications.

  8. Are there any common failure modes associated with the JANTX1N4117D-1 diode?

    • Common failure modes include overvoltage stress, excessive current, and thermal overstress, so proper circuit protection and design considerations are important.

  9. What are the recommended storage and handling precautions for the JANTX1N4117D-1 diode?

    • It is recommended to store the diode in an anti-static bag and handle it with ESD precautions to prevent damage from electrostatic discharge.

  10. Where can I find detailed application notes and reference designs for the JANTX1N4117D-1 diode?

    • Detailed application notes and reference designs can be found in the manufacturer's datasheet, as well as in technical literature related to power electronics and circuit design.