Microsemi Corporation
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
JANS2N6251T1
Lihat Butiran Helaian data

JANS2N6251T1 - Encyclopedia Entry

Product Overview

The JANS2N6251T1 belongs to the category of high-power NPN transistors. It is commonly used in electronic circuits for amplification and switching purposes. The transistor exhibits high power-handling capabilities, making it suitable for applications requiring robust performance. The package type for JANS2N6251T1 is TO-254, and it is available in various quantities per package.

Specifications

  • Maximum Collector-Emitter Voltage: 100V
  • Maximum Collector Current: 20A
  • Power Dissipation: 250W
  • Transition Frequency: 4MHz
  • Operating Temperature Range: -65°C to 200°C

Detailed Pin Configuration

The JANS2N6251T1 transistor has a standard three-pin configuration: 1. Emitter (E) 2. Base (B) 3. Collector (C)

Functional Features

  • High power-handling capability
  • Low saturation voltage
  • Fast switching speed
  • Robust construction for reliability

Advantages and Disadvantages

Advantages

  • High power handling
  • Fast switching speed
  • Low saturation voltage

Disadvantages

  • Relatively higher cost compared to standard transistors
  • Requires careful thermal management due to high power dissipation

Working Principles

The JANS2N6251T1 operates based on the principles of bipolar junction transistors. When a small current flows into the base terminal, it controls a larger current flow between the collector and emitter terminals. This property allows the transistor to amplify signals or act as a switch in electronic circuits.

Detailed Application Field Plans

The JANS2N6251T1 is commonly used in high-power amplifier circuits, motor control systems, power supply units, and industrial automation equipment. Its ability to handle high currents and voltages makes it suitable for demanding applications where reliability and performance are crucial.

Detailed and Complete Alternative Models

  • JANS2N6251
  • JANS2N6251A
  • JANS2N6251B
  • JANS2N6251C

These alternative models offer similar performance characteristics and can be used as substitutes for the JANS2N6251T1 in various applications.

This entry provides a comprehensive overview of the JANS2N6251T1 transistor, covering its product details, specifications, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi JANS2N6251T1 dalam penyelesaian teknikal

  1. What is the JANS2N6251T1 transistor used for?

    • The JANS2N6251T1 is a high-reliability, high-power NPN bipolar junction transistor (BJT) commonly used in applications requiring high performance and ruggedness.

  2. What are the key specifications of the JANS2N6251T1?

    • The JANS2N6251T1 features a maximum collector current of 30A, a maximum collector-emitter voltage of 100V, and a power dissipation of 300W.

  3. In what types of technical solutions is the JANS2N6251T1 commonly employed?

    • The JANS2N6251T1 is often used in power supply circuits, motor control systems, audio amplifiers, and other high-power applications where reliability and performance are critical.

  4. What are the thermal characteristics of the JANS2N6251T1?

    • The JANS2N6251T1 has a maximum junction temperature of 200°C and a thermal resistance of 0.5°C/W, making it suitable for demanding thermal environments.

  5. Does the JANS2N6251T1 require any special handling or mounting considerations?

    • Yes, due to its high power capabilities, proper heat sinking and thermal management are essential for the reliable operation of the JANS2N6251T1.

  6. Are there any recommended complementary components to use with the JANS2N6251T1?

    • It is advisable to pair the JANS2N6251T1 with appropriate driver circuits, protective diodes, and heat sinks to ensure optimal performance and reliability.

  7. What are the typical operating conditions for the JANS2N6251T1?

    • The JANS2N6251T1 operates within a wide temperature range of -65°C to 200°C and can handle high-voltage and high-current loads.

  8. Can the JANS2N6251T1 be used in switching applications?

    • Yes, the JANS2N6251T1 can be utilized in switching applications, provided that proper drive circuitry and protection measures are implemented.

  9. What are the potential failure modes of the JANS2N6251T1?

    • Common failure modes include thermal runaway, overvoltage stress, and excessive current leading to device breakdown. Proper design and operating conditions can mitigate these risks.

  10. Is the JANS2N6251T1 readily available and cost-effective for production applications?

    • While the JANS2N6251T1 is a high-reliability component, it may have higher procurement costs compared to standard transistors. However, its performance and ruggedness justify its use in critical technical solutions.