Microsemi Corporation
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
2N3737UB
Lihat Butiran Helaian data

2N3737UB

Product Overview

Category:

The 2N3737UB belongs to the category of bipolar junction transistors (BJTs).

Use:

It is commonly used as a general-purpose amplifier or switch in electronic circuits.

Characteristics:

  • Low power dissipation
  • High current gain
  • Medium voltage capability

Package:

The 2N3737UB is typically available in a TO-92 package.

Essence:

This transistor is essential for amplifying and switching electronic signals in various applications.

Packaging/Quantity:

It is usually packaged in reels, tubes, or bulk quantities depending on the supplier.

Specifications

  • Collector-Base Voltage (VCBO): 40V
  • Collector-Emitter Voltage (VCEO): 25V
  • Emitter-Base Voltage (VEBO): 5V
  • Collector Current (IC): 600mA
  • Power Dissipation (PD): 625mW
  • Transition Frequency (ft): 100MHz
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The 2N3737UB has three pins: 1. Collector (C) 2. Base (B) 3. Emitter (E)

Functional Features

  • High current gain allows for small base current to control large collector current.
  • Low power dissipation makes it suitable for low-power applications.
  • Medium voltage capability enables it to be used in a wide range of circuits.

Advantages and Disadvantages

Advantages

  • High current gain
  • Low power dissipation
  • Versatile applications

Disadvantages

  • Limited voltage and current handling capabilities compared to other transistors
  • Relatively lower frequency response

Working Principles

The 2N3737UB operates based on the principles of controlling the flow of current between its collector and emitter terminals using the base current. It acts as an amplifier by modulating the collector current based on the base current.

Detailed Application Field Plans

The 2N3737UB is widely used in the following applications: - Audio amplifiers - Signal amplification in electronic circuits - Switching circuits - Oscillator circuits

Detailed and Complete Alternative Models

Some alternative models to the 2N3737UB include: - 2N2222A - BC547 - BC548 - 2N3904

In conclusion, the 2N3737UB is a versatile BJT with applications in amplification and switching circuits. Its characteristics make it suitable for various low-power electronic applications.

Word Count: 345

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi 2N3737UB dalam penyelesaian teknikal

  1. What is the 2N3737UB transistor used for?

    • The 2N3737UB is a general-purpose NPN bipolar junction transistor commonly used for amplification and switching applications in electronic circuits.

  2. What are the key specifications of the 2N3737UB transistor?

    • The 2N3737UB has a maximum collector current (Ic) of 500mA, a maximum collector-emitter voltage (Vce) of 40V, and a maximum power dissipation (Pd) of 625mW.

  3. Can the 2N3737UB be used for audio amplification?

    • Yes, the 2N3737UB can be used for small-signal audio amplification due to its moderate power handling capabilities and low noise characteristics.

  4. Is the 2N3737UB suitable for switching applications?

    • Yes, the 2N3737UB can be used for low-power switching applications such as driving relays, small motors, or other low-current loads.

  5. What are the typical operating conditions for the 2N3737UB?

    • The 2N3737UB is typically operated within a temperature range of -55°C to 150°C and is suitable for use in various electronic systems.

  6. Does the 2N3737UB require a heat sink for operation?

    • For most low-power applications, the 2N3737UB does not require a heat sink due to its moderate power dissipation. However, for high-power applications, a heat sink may be necessary.

  7. Can the 2N3737UB be used in high-frequency applications?

    • The 2N3737UB is not specifically designed for high-frequency applications, but it can function adequately at moderate frequencies commonly encountered in general electronic circuits.

  8. Are there any common alternative transistors to the 2N3737UB?

    • Common alternatives to the 2N3737UB include the 2N2222, BC547, and 2N3904 transistors, which have similar characteristics and can be used in its place in many applications.

  9. What precautions should be taken when using the 2N3737UB in a circuit?

    • It is important to ensure proper biasing and operating conditions to prevent damage to the transistor. Additionally, attention should be paid to the maximum ratings specified in the datasheet.

  10. Where can I find detailed technical information about the 2N3737UB?

    • Detailed technical information about the 2N3737UB can be found in its datasheet, which is available from various semiconductor manufacturers and distributors.