Microsemi Corporation
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
1N4916A
Lihat Butiran Helaian data

1N4916A Diode

Product Overview

Category:

The 1N4916A diode belongs to the category of semiconductor devices.

Use:

It is commonly used as a rectifier in electronic circuits to convert alternating current (AC) to direct current (DC).

Characteristics:

  • Forward Voltage: 1V
  • Reverse Voltage: 200V
  • Maximum Continuous Forward Current: 1A
  • Package Type: DO-41
  • Operating Temperature Range: -65°C to +175°C

Package:

The 1N4916A diode is typically available in a DO-41 package.

Packaging/Quantity:

It is usually packaged in reels, tubes, or bulk quantities, depending on the manufacturer.

Specifications

  • Forward Voltage Drop: 1V
  • Reverse Voltage: 200V
  • Maximum Continuous Forward Current: 1A
  • Peak Surge Current: 30A
  • Junction Temperature: -65°C to +175°C
  • Storage Temperature: -65°C to +175°C

Detailed Pin Configuration

The 1N4916A diode has two pins. The cathode is marked with a band around one end of the diode body.

Functional Features

The 1N4916A diode acts as a one-way valve for electric current, allowing current to flow in only one direction.

Advantages and Disadvantages

Advantages:

  • Low forward voltage drop
  • High surge current capability
  • Wide operating temperature range

Disadvantages:

  • Relatively high reverse leakage current
  • Limited maximum continuous forward current

Working Principles

When the diode is forward-biased, it allows current to flow through it. When reverse-biased, it blocks the flow of current.

Detailed Application Field Plans

The 1N4916A diode finds applications in various electronic circuits, including: - Power supplies - Rectifiers - Voltage regulators - Signal demodulation

Detailed and Complete Alternative Models

Some alternative models to the 1N4916A diode include: - 1N4001 - 1N4148 - 1N5408 - 1N5819

This completes the entry for the 1N4916A diode, covering its product details, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi 1N4916A dalam penyelesaian teknikal

  1. What is the 1N4916A diode used for?

    • The 1N4916A diode is commonly used for voltage regulation, surge protection, and rectification in various technical solutions.

  2. What are the key specifications of the 1N4916A diode?

    • The 1N4916A diode typically has a maximum repetitive peak reverse voltage of 200V, a forward current of 3A, and a forward voltage drop of around 1V.

  3. How does the 1N4916A diode provide surge protection?

    • The 1N4916A diode can clamp transient voltage spikes to a safe level, protecting sensitive components from damage during power surges or voltage transients.

  4. In what applications is the 1N4916A diode commonly used?

    • The 1N4916A diode is often used in power supplies, automotive electronics, industrial equipment, and consumer electronics for voltage regulation and transient suppression.

  5. What is the typical operating temperature range for the 1N4916A diode?

    • The 1N4916A diode is designed to operate within a temperature range of -65°C to 175°C, making it suitable for a wide range of environments.

  6. Can the 1N4916A diode be used for rectification in AC-to-DC converters?

    • Yes, the 1N4916A diode is commonly used for full-wave rectification in AC-to-DC converter circuits due to its high current capability and low forward voltage drop.

  7. Does the 1N4916A diode require a heat sink for certain applications?

    • In high-power applications or when operating at elevated temperatures, using a heat sink with the 1N4916A diode may be necessary to ensure optimal performance and reliability.

  8. What are the potential failure modes of the 1N4916A diode?

    • The 1N4916A diode can fail due to overvoltage conditions, excessive current, or thermal stress, so proper circuit protection and derating guidelines should be followed.

  9. Are there any recommended layout considerations for incorporating the 1N4916A diode into a PCB design?

    • It's important to minimize trace lengths and keep the diode close to the components it is protecting to reduce parasitic inductance and ensure effective transient suppression.

  10. Can the 1N4916A diode be replaced with other diode types in a circuit?

    • While the 1N4916A diode has specific characteristics, it can be substituted with similar diodes that have comparable voltage and current ratings, as well as similar switching and recovery times. However, it's important to verify compatibility and performance in the specific application.