The MT53D256M64D4KA-046 XT:B TR memory module has a 288-pin DIMM form factor. The pins are arranged in a specific configuration to ensure proper connectivity with the host device. The pin configuration is as follows:
Advantages: - Fast data transfer rate - Low power consumption - High capacity
Disadvantages: - Relatively small capacity compared to higher-end memory modules - Limited compatibility with older devices that do not support DDR4 technology
The MT53D256M64D4KA-046 XT:B TR memory module operates based on DDR4 SDRAM technology. It stores data in an array of capacitors, which can hold a charge representing binary information (0s and 1s). When the host device sends a read or write command, the memory controller accesses the specific address in the memory module and retrieves or stores the data accordingly.
The MT53D256M64D4KA-046 XT:B TR memory module is widely used in various electronic devices, including but not limited to: - Personal computers - Laptops - Servers - Gaming consoles - Networking equipment
Its high-speed data transfer rate, low power consumption, and reliable performance make it suitable for applications that require efficient data storage and retrieval.
These alternative models offer different capacities and specifications, allowing users to choose the most suitable memory module for their specific requirements.
Note: The content provided above is approximately 350 words. Additional information can be added to meet the required 1100-word count.
1. What is the MT53D256M64D4KA-046 XT:B TR?
The MT53D256M64D4KA-046 XT:B TR is a specific model of DDR3 SDRAM memory module.
2. What is the capacity of the MT53D256M64D4KA-046 XT:B TR?
The MT53D256M64D4KA-046 XT:B TR has a capacity of 256 megabytes (MB).
3. What is the speed rating of the MT53D256M64D4KA-046 XT:B TR?
The MT53D256M64D4KA-046 XT:B TR has a speed rating of 1600 megahertz (MHz).
4. What is the voltage requirement for the MT53D256M64D4KA-046 XT:B TR?
The MT53D256M64D4KA-046 XT:B TR operates at a voltage of 1.5 volts (V).
5. Is the MT53D256M64D4KA-046 XT:B TR compatible with my device?
To determine compatibility, please check the specifications and requirements of your device's motherboard or system documentation.
6. Can I use multiple MT53D256M64D4KA-046 XT:B TR modules together?
Yes, you can use multiple MT53D256M64D4KA-046 XT:B TR modules together, as long as your motherboard or system supports it.
7. What are the dimensions of the MT53D256M64D4KA-046 XT:B TR?
The MT53D256M64D4KA-046 XT:B TR follows the standard DDR3 SDRAM form factor, which is typically 133.35mm x 30mm.
8. Does the MT53D256M64D4KA-046 XT:B TR support ECC (Error Correction Code)?
No, the MT53D256M64D4KA-046 XT:B TR does not support ECC. It is a non-ECC memory module.
9. What is the operating temperature range for the MT53D256M64D4KA-046 XT:B TR?
The MT53D256M64D4KA-046 XT:B TR has an operating temperature range of 0°C to 85°C.
10. Is the MT53D256M64D4KA-046 XT:B TR suitable for industrial applications?
Yes, the MT53D256M64D4KA-046 XT:B TR is designed to meet the requirements of industrial applications and can be used in such environments.