Micron Technology Inc.
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
MT25QL128ABB1EW7-CSIT

MT25QL128ABB1EW7-CSIT

Product Overview

  • Category: Flash Memory
  • Use: Data storage and retrieval in electronic devices
  • Characteristics: High-speed, non-volatile memory with low power consumption
  • Package: Integrated Circuit (IC)
  • Essence: Provides reliable and efficient storage solution for various applications
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies based on customer requirements

Specifications

  • Memory Type: Quad SPI Flash
  • Density: 128Mb (16MB)
  • Interface: Serial Peripheral Interface (SPI)
  • Operating Voltage: 2.7V - 3.6V
  • Operating Temperature: -40°C to +85°C
  • Data Transfer Rate: Up to 133MHz
  • Write Protection: Hardware and software write protection options available
  • Erase Time: Sector erase time of 100ms, bulk erase time of 4s

Detailed Pin Configuration

The MT25QL128ABB1EW7-CSIT has a total of 8 pins:

  1. VCC: Power supply voltage
  2. GND: Ground reference
  3. HOLD: Suspends ongoing data transfer
  4. WP: Write protect pin
  5. CLK: Clock input for SPI communication
  6. DO: Data output from the flash memory
  7. DI: Data input to the flash memory
  8. CS: Chip select for device activation

Functional Features

  • High-speed read and write operations
  • Low power consumption
  • Reliable data retention
  • Flexible write protection options
  • Efficient sector and bulk erase capabilities
  • Wide operating temperature range

Advantages and Disadvantages

Advantages: - Fast data transfer rate - Low power consumption - Reliable and durable - Versatile write protection options - Suitable for various applications

Disadvantages: - Limited storage capacity compared to higher-density flash memory options - Higher cost per unit compared to lower-density flash memory options

Working Principles

The MT25QL128ABB1EW7-CSIT operates based on the Serial Peripheral Interface (SPI) protocol. It uses a quad SPI interface, allowing for high-speed data transfer between the flash memory and the host device. The memory cells store data in a non-volatile manner, ensuring data retention even when power is removed.

Detailed Application Field Plans

The MT25QL128ABB1EW7-CSIT is widely used in various electronic devices that require reliable and efficient data storage. Some common application fields include:

  1. Consumer Electronics: Smartphones, tablets, digital cameras
  2. Automotive: Infotainment systems, navigation systems
  3. Industrial: Embedded systems, control units
  4. Networking: Routers, switches
  5. IoT Devices: Wearables, smart home devices

Detailed and Complete Alternative Models

  1. MT25QL256ABB1EW9-CSIT: 256Mb (32MB) density flash memory with similar specifications
  2. MT25QU128ABB1EW7-CSIT: Quad SPI flash memory with enhanced features and performance
  3. MT25QL512ABB1EW7-CSIT: Higher-density flash memory with 512Mb (64MB) capacity

Note: This is not an exhaustive list of alternative models, and there may be other options available from different manufacturers.

Word count: 410 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi MT25QL128ABB1EW7-CSIT dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of MT25QL128ABB1EW7-CSIT in technical solutions:

1. What is MT25QL128ABB1EW7-CSIT? MT25QL128ABB1EW7-CSIT is a specific model of flash memory chip manufactured by Micron Technology. It offers a capacity of 128 megabytes and is commonly used in various technical solutions.

2. What are the main features of MT25QL128ABB1EW7-CSIT? Some key features of MT25QL128ABB1EW7-CSIT include high-speed data transfer, low power consumption, advanced security features, and a wide operating temperature range.

3. In what applications can MT25QL128ABB1EW7-CSIT be used? MT25QL128ABB1EW7-CSIT can be used in a wide range of applications such as automotive systems, industrial automation, networking equipment, medical devices, and consumer electronics.

4. What is the maximum data transfer rate of MT25QL128ABB1EW7-CSIT? MT25QL128ABB1EW7-CSIT supports a maximum data transfer rate of up to 133 megabytes per second (MB/s).

5. Does MT25QL128ABB1EW7-CSIT support hardware encryption? Yes, MT25QL128ABB1EW7-CSIT supports hardware-based AES-256 encryption, providing enhanced security for sensitive data.

6. Can MT25QL128ABB1EW7-CSIT operate in extreme temperatures? Yes, MT25QL128ABB1EW7-CSIT has a wide operating temperature range of -40°C to +85°C, making it suitable for use in harsh environments.

7. Is MT25QL128ABB1EW7-CSIT compatible with different interfaces? Yes, MT25QL128ABB1EW7-CSIT is compatible with various standard interfaces such as SPI (Serial Peripheral Interface) and QSPI (Quad Serial Peripheral Interface).

8. What is the lifespan of MT25QL128ABB1EW7-CSIT? MT25QL128ABB1EW7-CSIT has a high endurance rating, typically lasting for millions of program/erase cycles, ensuring long-term reliability.

9. Can MT25QL128ABB1EW7-CSIT be used for firmware storage in embedded systems? Yes, MT25QL128ABB1EW7-CSIT is commonly used for firmware storage in embedded systems due to its fast read/write speeds and large capacity.

10. Is MT25QL128ABB1EW7-CSIT readily available in the market? Yes, MT25QL128ABB1EW7-CSIT is a popular flash memory chip and is readily available from authorized distributors and suppliers.

Please note that the specific details and features may vary depending on the manufacturer's specifications and application requirements.