M29F400BB90N6

Product Overview

• Category: Integrated Circuit (IC)
• Use: Non-volatile Memory
• Characteristics: High-density, Flash memory
• Package: 48-pin TSOP (Thin Small Outline Package)
• Essence: Reliable and high-performance non-volatile memory solution
• Packaging/Quantity: Available in tape and reel packaging, quantity varies based on customer requirements

Specifications

• Memory Type: Flash
• Memory Size: 4 Megabits (512 Kbytes x 8 bits)
• Organization: 512K x 8 bits
• Supply Voltage: 2.7V - 3.6V
• Access Time: 90 ns
• Operating Temperature: -40°C to +85°C
• Interface: Parallel
• Data Retention: 20 years
• Erase/Program Cycles: 100,000 cycles

Detailed Pin Configuration

The M29F400BB90N6 has a total of 48 pins, which are assigned specific functions as follows:

1. A0-A18: Address Inputs
2. DQ0-DQ7: Data Input/Output
3. WE#: Write Enable
4. CE#: Chip Enable
5. OE#: Output Enable
6. RP#/BYTE#: Reset/Byte#
7. VCC: Power Supply
8. GND: Ground

(Note: The remaining pin assignments can be found in the product datasheet.)

Functional Features

• High-density storage capacity
• Fast access time
• Low power consumption
• Easy integration into existing systems
• Reliable data retention
• Wide operating temperature range

Advantages

• Provides ample storage space for various applications
• Quick access time enhances system performance
• Low power consumption prolongs battery life
• Easy integration reduces development time and effort
• Reliable data retention ensures long-term data integrity
• Suitable for use in extreme temperature conditions

Disadvantages

• Limited erase/program cycles may restrict certain applications
• Parallel interface may not be suitable for all system designs
• Higher cost compared to some alternative memory solutions

Working Principles

The M29F400BB90N6 is based on Flash memory technology, which allows for non-volatile storage of data. It utilizes a parallel interface to communicate with the host system, enabling fast data transfer. The memory cells within the IC can be electrically erased and programmed, allowing for flexible data modification.

Detailed Application Field Plans

The M29F400BB90N6 is commonly used in various electronic devices and systems, including but not limited to:

1. Consumer electronics (e.g., digital cameras, MP3 players)
2. Communication equipment (e.g., routers, modems)
3. Automotive applications (e.g., infotainment systems, engine control units)
4. Industrial automation (e.g., PLCs, robotics)
5. Medical devices (e.g., patient monitoring systems, diagnostic equipment)

Detailed and Complete Alternative Models

1. M29F400BT90M6: Similar specifications, different package (48-pin TSOP)
2. M29F400BB70N6: Lower access time (70 ns), same package (48-pin TSOP)
3. M29F400BB55N6: Lower access time (55 ns), same package (48-pin TSOP)
4. M29F400BB120N6: Higher access time (120 ns), same package (48-pin TSOP)

(Note: The above list is not exhaustive and other alternative models may exist.)

This entry provides an overview of the M29F400BB90N6, a high-density flash memory IC. It includes information on its category, use, characteristics, package, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models. The M29F400BB90N6 is a reliable and versatile memory solution suitable for various electronic applications.