Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
TC54VN4202EZB713

TC54VN4202EZB713

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Regulator
  • Characteristics:
    • Low dropout voltage
    • High output current capability
    • Wide input voltage range
    • Thermal shutdown protection
  • Package: SOT-23-5
  • Essence: This IC is designed to regulate voltage in various electronic devices, ensuring stable and reliable power supply.
  • Packaging/Quantity: Available in tape and reel packaging, with 3000 units per reel.

Specifications

  • Input Voltage Range: 2.7V to 6.0V
  • Output Voltage: 2.5V
  • Output Current: Up to 150mA
  • Dropout Voltage: 200mV at 100mA
  • Quiescent Current: 50µA
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

  1. GND (Ground)
  2. VOUT (Output Voltage)
  3. VIN (Input Voltage)
  4. BYPASS (Bypass Capacitor)
  5. SHUTDOWN (Shutdown Control)

Functional Features

  • Low dropout voltage ensures efficient power conversion.
  • High output current capability allows for powering a wide range of devices.
  • Wide input voltage range accommodates different power sources.
  • Thermal shutdown protection prevents overheating and damage to the IC.

Advantages

  • Stable and reliable voltage regulation.
  • Compact SOT-23-5 package for space-constrained applications.
  • Low quiescent current minimizes power consumption.
  • Easy integration into various electronic circuits.

Disadvantages

  • Limited output current compared to higher-power regulators.
  • Fixed output voltage may not suit all applications.
  • Requires an external bypass capacitor for optimal performance.

Working Principles

The TC54VN4202EZB713 is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage, adjusting the pass transistor's resistance to maintain a constant output voltage despite changes in input voltage and load conditions.

Detailed Application Field Plans

  • Battery-powered devices: Provides stable voltage for microcontrollers, sensors, and other low-power components.
  • Portable audio players: Ensures consistent power supply for audio amplifiers and digital-to-analog converters.
  • IoT devices: Regulates voltage for wireless modules, sensors, and microcontrollers in smart home applications.
  • Automotive electronics: Powers various automotive systems, such as infotainment systems and engine control units.

Detailed and Complete Alternative Models

  1. LM1117-2.5: Similar voltage regulator with adjustable output voltage.
  2. MCP1700-2502E/TO: Low dropout voltage regulator with higher output current capability.
  3. TS2940CX50: Fixed output voltage regulator with lower quiescent current.

Note: This is not an exhaustive list of alternative models, but provides a few examples.

This entry has provided a comprehensive overview of the TC54VN4202EZB713 voltage regulator, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi TC54VN4202EZB713 dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of TC54VN4202EZB713 in technical solutions:

  1. Q: What is TC54VN4202EZB713? A: TC54VN4202EZB713 is a voltage supervisor IC (Integrated Circuit) that monitors the power supply voltage and provides a reset signal when the voltage falls below a certain threshold.

  2. Q: What is the operating voltage range of TC54VN4202EZB713? A: The operating voltage range of TC54VN4202EZB713 is typically between 1.6V and 5.5V.

  3. Q: How does TC54VN4202EZB713 help in technical solutions? A: TC54VN4202EZB713 ensures proper system operation by monitoring the power supply voltage and generating a reset signal to prevent erratic behavior or data corruption during power-up, power-down, or brownout conditions.

  4. Q: What is the typical reset threshold voltage of TC54VN4202EZB713? A: The typical reset threshold voltage of TC54VN4202EZB713 is 4.20V.

  5. Q: Can I adjust the reset threshold voltage of TC54VN4202EZB713? A: No, the reset threshold voltage of TC54VN4202EZB713 is fixed and cannot be adjusted.

  6. Q: Does TC54VN4202EZB713 have an open-drain output? A: Yes, TC54VN4202EZB713 has an open-drain output, which allows for easy interfacing with other devices.

  7. Q: What is the maximum supply current of TC54VN4202EZB713? A: The maximum supply current of TC54VN4202EZB713 is typically 10µA.

  8. Q: Can TC54VN4202EZB713 operate in a wide temperature range? A: Yes, TC54VN4202EZB713 is designed to operate in a wide temperature range, typically from -40°C to +125°C.

  9. Q: Is TC54VN4202EZB713 suitable for battery-powered applications? A: Yes, TC54VN4202EZB713 is suitable for battery-powered applications due to its low supply current and wide operating voltage range.

  10. Q: What package options are available for TC54VN4202EZB713? A: TC54VN4202EZB713 is available in various package options, such as SOT-23, SC-70, and DFN, providing flexibility for different application requirements.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of TC54VN4202EZB713.