Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
TC54VN1502EZB

TC54VN1502EZB

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Regulator
  • Characteristics: Low Dropout, Low Quiescent Current, High Accuracy
  • Package: SOT-23-5
  • Essence: Provides stable voltage output for various electronic devices
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 1.2V to 5.5V
  • Dropout Voltage: 200mV at 100mA
  • Quiescent Current: 35µA typical
  • Output Current: 150mA maximum
  • Line Regulation: ±0.2% typical
  • Load Regulation: ±0.4% typical
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The TC54VN1502EZB has a total of five pins:

  1. VIN - Input Voltage Pin
  2. GND - Ground Pin
  3. EN - Enable Pin
  4. VOUT - Output Voltage Pin
  5. BYP - Bypass Pin

Functional Features

  • Low dropout voltage ensures efficient power conversion.
  • Low quiescent current minimizes power consumption in standby mode.
  • High accuracy provides precise voltage regulation.
  • Enable pin allows for easy on/off control.
  • Bypass pin improves transient response and stability.

Advantages and Disadvantages

Advantages

  • Compact SOT-23-5 package enables space-saving designs.
  • Wide input voltage range accommodates various power sources.
  • Excellent line and load regulation ensures stable output voltage.
  • Low quiescent current extends battery life in portable applications.

Disadvantages

  • Maximum output current of 150mA may not be sufficient for high-power devices.
  • Limited output voltage range may not meet the requirements of certain applications.

Working Principles

The TC54VN1502EZB is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage and adjusting the pass transistor accordingly. This ensures a stable output voltage despite variations in input voltage and load conditions.

Detailed Application Field Plans

The TC54VN1502EZB is commonly used in various electronic devices, including:

  1. Battery-powered devices: Portable audio players, handheld gaming consoles
  2. Communication systems: Mobile phones, wireless routers
  3. Computer peripherals: USB hubs, external hard drives
  4. Automotive electronics: Infotainment systems, navigation devices
  5. Industrial equipment: Sensors, control systems

Detailed and Complete Alternative Models

  1. LM1117-3.3: Similar voltage regulator with fixed 3.3V output.
  2. MCP1700-5002E/TO: Low dropout voltage regulator with 500mA maximum output current.
  3. LT1763CS8-3.3: High accuracy voltage regulator with adjustable output voltage.

(Note: The above alternative models are provided as examples and not an exhaustive list.)

Word count: 342 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi TC54VN1502EZB dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of TC54VN1502EZB in technical solutions:

  1. Q: What is TC54VN1502EZB? A: TC54VN1502EZB is a voltage supervisor IC (Integrated Circuit) that monitors the power supply voltage and provides a reset signal when the voltage falls below a certain threshold.

  2. Q: What are the typical applications of TC54VN1502EZB? A: TC54VN1502EZB is commonly used in microcontroller-based systems, embedded systems, industrial automation, automotive electronics, and other applications where reliable power supply monitoring is crucial.

  3. Q: How does TC54VN1502EZB work? A: TC54VN1502EZB continuously monitors the input voltage and compares it with a reference voltage. If the input voltage drops below the reference voltage, it generates a reset signal to ensure proper system operation.

  4. Q: What is the operating voltage range of TC54VN1502EZB? A: The operating voltage range of TC54VN1502EZB is typically between 1.6V and 5.5V.

  5. Q: Can TC54VN1502EZB be used with different microcontrollers or processors? A: Yes, TC54VN1502EZB can be used with various microcontrollers or processors as long as the operating voltage requirements are within its specified range.

  6. Q: Does TC54VN1502EZB have any adjustable parameters? A: No, TC54VN1502EZB is a fixed voltage supervisor IC and does not have adjustable parameters.

  7. Q: What is the output type of TC54VN1502EZB? A: TC54VN1502EZB has an active-low push-pull output, which means it pulls the reset signal low when the input voltage falls below the threshold.

  8. Q: Can TC54VN1502EZB tolerate voltage spikes or transients? A: Yes, TC54VN1502EZB has built-in protection against voltage spikes and transients, ensuring reliable operation in noisy environments.

  9. Q: What is the typical reset time delay of TC54VN1502EZB? A: The typical reset time delay of TC54VN1502EZB is around 200ms, but it may vary depending on the specific model and operating conditions.

  10. Q: Is TC54VN1502EZB available in different package options? A: Yes, TC54VN1502EZB is available in various package options, such as SOT-23, SC-70, and DFN, allowing flexibility in board design and integration.

Please note that the answers provided here are general and may vary based on the specific datasheet and manufacturer's specifications for TC54VN1502EZB.