Microchip Technology
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
TC54VC4102EZB
Lihat Butiran Helaian data

TC54VC4102EZB

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Regulator
  • Characteristics: Low Dropout, Low Quiescent Current, High Accuracy
  • Package: SOT-23-5
  • Essence: Provides stable voltage output for electronic devices
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.7V to 6.0V
  • Output Voltage Range: 1.2V to 5.5V
  • Dropout Voltage: 200mV at 100mA load current
  • Quiescent Current: 30µA typical
  • Accuracy: ±2% over temperature range
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The TC54VC4102EZB has a total of five pins:

  1. VIN - Input voltage pin
  2. GND - Ground pin
  3. VOUT - Output voltage pin
  4. NC - No connection pin
  5. EN - Enable pin

Functional Features

  • Low dropout voltage ensures efficient power conversion.
  • Low quiescent current minimizes power consumption in standby mode.
  • High accuracy provides precise voltage regulation.
  • Enable pin allows for easy on/off control of the regulator.

Advantages and Disadvantages

Advantages

  • Compact SOT-23-5 package saves board space.
  • Wide input voltage range accommodates various power sources.
  • Low dropout voltage enables operation with low input-output differentials.
  • Low quiescent current prolongs battery life in portable applications.
  • High accuracy ensures stable voltage output for sensitive electronics.

Disadvantages

  • Limited maximum output current (100mA).
  • No thermal shutdown protection.
  • Not suitable for high-power applications.

Working Principles

The TC54VC4102EZB is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with a feedback voltage derived from the output. The pass transistor adjusts its resistance to maintain a constant output voltage, compensating for changes in load and input voltage.

Detailed Application Field Plans

The TC54VC4102EZB is commonly used in various electronic devices, including:

  1. Battery-powered devices: Portable audio players, handheld gaming consoles.
  2. Communication equipment: Mobile phones, wireless routers.
  3. Computer peripherals: USB hubs, external hard drives.
  4. Automotive electronics: Car audio systems, GPS devices.
  5. Industrial control systems: Sensors, actuators.

Detailed and Complete Alternative Models

  1. LM1117-ADJ: Adjustable voltage regulator with higher maximum output current (800mA).
  2. MCP1700-3302E/TO: Fixed 3.3V voltage regulator with lower quiescent current (1.6µA).
  3. LT1763CS8-3.3: Low dropout voltage regulator with adjustable output voltage and thermal shutdown protection.

These alternative models offer different specifications and features, providing flexibility for various application requirements.

Word count: 315 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi TC54VC4102EZB dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of TC54VC4102EZB in technical solutions:

  1. Q: What is TC54VC4102EZB? A: TC54VC4102EZB is a voltage supervisor IC (Integrated Circuit) that monitors the power supply voltage and provides a reset signal when the voltage falls below a certain threshold.

  2. Q: What are the typical applications of TC54VC4102EZB? A: TC54VC4102EZB is commonly used in various technical solutions where reliable power supply monitoring and reset functionality are required, such as microcontrollers, DSPs, FPGAs, and other digital systems.

  3. Q: How does TC54VC4102EZB work? A: TC54VC4102EZB continuously monitors the power supply voltage and compares it with a preset threshold. If the voltage drops below the threshold, it generates a reset signal to ensure proper system operation.

  4. Q: What is the operating voltage range of TC54VC4102EZB? A: TC54VC4102EZB operates within a voltage range of 1.6V to 5.5V, making it suitable for a wide range of applications.

  5. Q: Can TC54VC4102EZB be used with both positive and negative supply voltages? A: No, TC54VC4102EZB is designed to work with positive supply voltages only.

  6. Q: Does TC54VC4102EZB have any adjustable parameters? A: Yes, TC54VC4102EZB allows for adjustable reset thresholds through external resistors, providing flexibility in different system requirements.

  7. Q: What is the typical reset time delay of TC54VC4102EZB? A: The typical reset time delay of TC54VC4102EZB is around 200ms, ensuring sufficient time for the power supply to stabilize before releasing the reset signal.

  8. Q: Can TC54VC4102EZB tolerate voltage transients or spikes? A: Yes, TC54VC4102EZB has built-in hysteresis and can tolerate voltage transients or spikes within its specified limits without generating false reset signals.

  9. Q: Is TC54VC4102EZB available in different package options? A: Yes, TC54VC4102EZB is available in various package options, such as SOT-23, SC-70, and DFN, allowing for flexibility in board layout and space constraints.

  10. Q: Are there any specific precautions to consider when using TC54VC4102EZB? A: It is important to follow the manufacturer's datasheet and application notes for proper usage and recommended external component values to ensure reliable operation of TC54VC4102EZB in your technical solution.

Please note that these answers are general and may vary depending on the specific requirements and datasheet of TC54VC4102EZB.