Microchip Technology
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
PIC24FV08KM102-E/SS
Lihat Butiran Helaian data

PIC24FV08KM102-E/SS

Product Overview

Category

The PIC24FV08KM102-E/SS belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic applications that require embedded control and processing capabilities.

Characteristics

  • High-performance 16-bit architecture
  • Low power consumption
  • Large memory capacity
  • Integrated peripherals for enhanced functionality
  • Robust communication interfaces
  • Real-time clock for accurate timing

Package

The PIC24FV08KM102-E/SS is available in a small-sized SSOP package, which allows for easy integration into compact electronic devices.

Essence

The essence of this microcontroller lies in its ability to provide efficient and reliable control and processing capabilities for a wide range of electronic applications.

Packaging/Quantity

The PIC24FV08KM102-E/SS is typically packaged in reels or tubes, with each containing a specific quantity of microcontrollers. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Microcontroller Family: PIC24F
  • Model: PIC24FV08KM102-E/SS
  • Architecture: 16-bit
  • Flash Memory: 8 KB
  • RAM: 1 KB
  • Operating Voltage: 2.0V - 3.6V
  • Maximum Clock Speed: 32 MHz
  • Number of I/O Pins: 28
  • Communication Interfaces: UART, SPI, I2C
  • Analog-to-Digital Converter (ADC): 10-bit, 12 channels
  • Timers/Counters: Multiple timers/counters with various modes

Detailed Pin Configuration

The PIC24FV08KM102-E/SS has a total of 28 pins, each serving a specific purpose. The pin configuration is as follows:

  • Pin 1: VDD (Power Supply)
  • Pin 2: VSS (Ground)
  • Pin 3: RA0/AN0 (Analog Input/Output)
  • Pin 4: RA1/AN1 (Analog Input/Output)
  • Pin 5: RA2/AN2 (Analog Input/Output)
  • Pin 6: RA3/AN3 (Analog Input/Output)
  • Pin 7: RA4/AN4 (Analog Input/Output)
  • Pin 8: RA5/AN5 (Analog Input/Output)
  • Pin 9: RB0/INT0 (Digital Input/Output)
  • Pin 10: RB1/INT1 (Digital Input/Output)
  • Pin 11: RB2/INT2 (Digital Input/Output)
  • Pin 12: RB3/INT3 (Digital Input/Output)
  • Pin 13: RB4/INT4 (Digital Input/Output)
  • Pin 14: RB5/INT5 (Digital Input/Output)
  • Pin 15: RB6/INT6 (Digital Input/Output)
  • Pin 16: RB7/INT7 (Digital Input/Output)
  • Pin 17: RB8/INT8 (Digital Input/Output)
  • Pin 18: RB9/INT9 (Digital Input/Output)
  • Pin 19: RB10/INT10 (Digital Input/Output)
  • Pin 20: RB11/INT11 (Digital Input/Output)
  • Pin 21: RB12/INT12 (Digital Input/Output)
  • Pin 22: RB13/INT13 (Digital Input/Output)
  • Pin 23: RB14/INT14 (Digital Input/Output)
  • Pin 24: RB15/INT15 (Digital Input/Output)
  • Pin 25: VCAP (Capacitor Connection)
  • Pin 26: VSS (Ground)
  • Pin 27: OSC1/CLKI (Oscillator Input)
  • Pin 28: OSC2/CLKO (Oscillator Output)

Functional Features

The PIC24FV08KM102-E/SS offers several functional features that enhance its usability and performance in various applications:

  1. High-performance 16-bit architecture allows for efficient data processing and control.
  2. Integrated peripherals, such as UART, SPI, and I2C interfaces, enable seamless communication with other devices.
  3. The built-in analog-to-digital converter (ADC) facilitates accurate measurement and conversion of analog signals.
  4. Multiple timers/counters provide precise timing and event management capabilities.
  5. Low power consumption ensures energy efficiency and longer battery life.

Advantages and Disadvantages

Advantages

  • High-performance architecture enables fast and efficient data processing.
  • Integrated peripherals simplify device connectivity and communication.
  • Ample memory capacity allows for complex application development.
  • Low power consumption prolongs battery life in portable devices.
  • Small-sized package enhances integration into compact electronic designs.

Disadvantages

  • Limited

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi PIC24FV08KM102-E/SS dalam penyelesaian teknikal

  1. What is the maximum operating frequency of PIC24FV08KM102-E/SS?
    - The maximum operating frequency of PIC24FV08KM102-E/SS is 32 MHz.

  2. Can PIC24FV08KM102-E/SS be used in battery-powered applications?
    - Yes, PIC24FV08KM102-E/SS is suitable for battery-powered applications due to its low power consumption.

  3. What are the communication interfaces supported by PIC24FV08KM102-E/SS?
    - PIC24FV08KM102-E/SS supports SPI, I2C, and UART communication interfaces.

  4. Is PIC24FV08KM102-E/SS suitable for motor control applications?
    - Yes, PIC24FV08KM102-E/SS can be used for motor control applications due to its integrated motor control peripherals.

  5. What development tools are available for programming PIC24FV08KM102-E/SS?
    - Development tools such as MPLAB X IDE and MPLAB XC16 Compiler can be used for programming PIC24FV08KM102-E/SS.

  6. Can PIC24FV08KM102-E/SS be used in industrial automation applications?
    - Yes, PIC24FV08KM102-E/SS is suitable for industrial automation applications due to its robust features and peripherals.

  7. Does PIC24FV08KM102-E/SS support analog-to-digital conversion?
    - Yes, PIC24FV08KM102-E/SS has built-in analog-to-digital converters for analog signal processing.

  8. What are the available memory options for PIC24FV08KM102-E/SS?
    - PIC24FV08KM102-E/SS offers various memory options including Flash program memory and SRAM data memory.

  9. Can PIC24FV08KM102-E/SS be used in temperature sensing applications?
    - Yes, PIC24FV08KM102-E/SS can be used in temperature sensing applications with the help of its analog inputs and sensor interfaces.

  10. Is PIC24FV08KM102-E/SS suitable for real-time control applications?
    - Yes, PIC24FV08KM102-E/SS is well-suited for real-time control applications due to its high-performance core and peripherals.