Microchip Technology
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
PIC24FJ64GC006T-I/MR
Lihat Butiran Helaian data

PIC24FJ64GC006T-I/MR

Product Overview

Category

The PIC24FJ64GC006T-I/MR belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems for controlling and processing data.

Characteristics

  • High-performance 16-bit architecture
  • Flash program memory
  • Integrated peripherals for enhanced functionality
  • Low power consumption
  • Wide operating voltage range
  • Robust communication interfaces

Package

The PIC24FJ64GC006T-I/MR is available in a small form factor package, making it suitable for space-constrained applications.

Essence

The essence of this microcontroller lies in its ability to provide efficient and reliable control and processing capabilities for a wide range of electronic devices.

Packaging/Quantity

The PIC24FJ64GC006T-I/MR is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Microcontroller Family: PIC24F
  • Core Size: 16-bit
  • Program Memory Size: 64 KB
  • RAM Size: 8 KB
  • Number of I/O Pins: 35
  • Operating Voltage Range: 2.0V to 3.6V
  • Maximum Speed: 40 MHz
  • Communication Interfaces: UART, SPI, I2C
  • Analog-to-Digital Converter (ADC) Resolution: 10-bit
  • Timers/Counters: 4
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The PIC24FJ64GC006T-I/MR microcontroller has a total of 35 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage input
  2. VSS - Ground reference
  3. RA0 - General-purpose I/O pin
  4. RA1 - General-purpose I/O pin
  5. RA2 - General-purpose I/O pin
  6. RA3 - General-purpose I/O pin
  7. RA4 - General-purpose I/O pin
  8. RA5 - General-purpose I/O pin
  9. RB0 - General-purpose I/O pin
  10. RB1 - General-purpose I/O pin
  11. RB2 - General-purpose I/O pin
  12. RB3 - General-purpose I/O pin
  13. RB4 - General-purpose I/O pin
  14. RB5 - General-purpose I/O pin
  15. RB6 - General-purpose I/O pin
  16. RB7 - General-purpose I/O pin
  17. RB8 - General-purpose I/O pin
  18. RB9 - General-purpose I/O pin
  19. RB10 - General-purpose I/O pin
  20. RB11 - General-purpose I/O pin
  21. RB12 - General-purpose I/O pin
  22. RB13 - General-purpose I/O pin
  23. RB14 - General-purpose I/O pin
  24. RB15 - General-purpose I/O pin
  25. VCAP - Capacitor connection for internal voltage regulator
  26. VSS - Ground reference
  27. OSC1/CLKI - Oscillator input/clock input
  28. OSC2/CLKO - Oscillator output/clock output
  29. AN0 - Analog input channel 0
  30. AN1 - Analog input channel 1
  31. AN2 - Analog input channel 2
  32. AN3 - Analog input channel 3
  33. AVDD - Power supply voltage for analog circuitry
  34. AVSS - Ground reference for analog circuitry
  35. MCLR - Master Clear (reset) input

Functional Features

The PIC24FJ64GC006T-I/MR microcontroller offers several functional features that enhance its usability and performance. These include:

  • Flash program memory for storing the application code
  • Integrated peripherals such as UART, SPI, and I2C for communication purposes
  • Analog-to-Digital Converter (ADC) for precise analog signal measurement
  • Timers/Counters for accurate timing and event counting
  • Low power consumption modes for energy-efficient operation
  • Enhanced debugging and programming capabilities

Advantages and Disadvantages

Advantages

  • High-performance 16-bit architecture enables efficient data processing
  • Wide operating voltage range allows flexibility in power supply selection
  • Integrated peripherals simplify system design and reduce external component count
  • Low power consumption extends battery life in portable applications
  • Robust communication interfaces facilitate seamless connectivity with other devices

Disadvantages

  • Limited program memory size may restrict the complexity of applications
  • Availability of alternative models with higher specifications may overshadow this microcontroller in certain scenarios

Working Principles

The PIC24FJ64GC006T-I/MR microcontroller operates based on the principles of digital logic and embedded systems. It executes instructions stored in

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi PIC24FJ64GC006T-I/MR dalam penyelesaian teknikal

  1. What is the maximum operating frequency of PIC24FJ64GC006T-I/MR?
    - The maximum operating frequency of PIC24FJ64GC006T-I/MR is 16 MHz.

  2. What are the key features of PIC24FJ64GC006T-I/MR?
    - Some key features of PIC24FJ64GC006T-I/MR include 64 KB Flash memory, 8 KB RAM, and multiple communication interfaces.

  3. Can PIC24FJ64GC006T-I/MR be used in battery-powered applications?
    - Yes, PIC24FJ64GC006T-I/MR is suitable for battery-powered applications due to its low power consumption.

  4. What development tools are available for programming PIC24FJ64GC006T-I/MR?
    - Development tools such as MPLAB X IDE and MPLAB ICD 4 can be used for programming and debugging PIC24FJ64GC006T-I/MR.

  5. Is PIC24FJ64GC006T-I/MR suitable for motor control applications?
    - Yes, PIC24FJ64GC006T-I/MR is well-suited for motor control applications due to its integrated peripherals and high performance.

  6. Can PIC24FJ64GC006T-I/MR be used in industrial automation systems?
    - Yes, PIC24FJ64GC006T-I/MR is commonly used in industrial automation systems due to its robust features and reliability.

  7. What communication interfaces are supported by PIC24FJ64GC006T-I/MR?
    - PIC24FJ64GC006T-I/MR supports interfaces such as UART, SPI, I2C, and USB.

  8. Is PIC24FJ64GC006T-I/MR compatible with 5V systems?
    - Yes, PIC24FJ64GC006T-I/MR is compatible with 5V systems, making it versatile for various applications.

  9. What are the temperature range specifications for PIC24FJ64GC006T-I/MR?
    - PIC24FJ64GC006T-I/MR has a temperature range of -40°C to 125°C, making it suitable for harsh environments.

  10. Are there any application notes or reference designs available for PIC24FJ64GC006T-I/MR?
    - Yes, Microchip provides application notes and reference designs to assist in the implementation of PIC24FJ64GC006T-I/MR in technical solutions.