PIC24F16KM102T-I/SO
Product Overview
Category
The PIC24F16KM102T-I/SO belongs to the category of microcontrollers.
Use
This microcontroller is commonly used in various electronic devices and embedded systems for controlling and processing data.
Characteristics
- High-performance 16-bit architecture
- Low power consumption
- Large memory capacity
- Integrated peripherals for enhanced functionality
- Wide operating voltage range
Package
The PIC24F16KM102T-I/SO is available in a small outline (SO) package, which is suitable for surface mount applications.
Essence
The essence of this microcontroller lies in its ability to provide efficient and reliable control and processing capabilities for electronic devices.
Packaging/Quantity
The PIC24F16KM102T-I/SO is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.
Specifications
- Microcontroller Family: PIC24F
- Core Size: 16-bit
- Program Memory Size: 16KB
- RAM Size: 1KB
- Number of I/O Pins: 28
- Operating Voltage Range: 2.0V to 3.6V
- Maximum Speed: 32MHz
- Communication Interfaces: UART, SPI, I2C
- Analog-to-Digital Converter (ADC): 10-bit, 16 channels
- Timers/Counters: Multiple timers/counters available
Detailed Pin Configuration
The PIC24F16KM102T-I/SO has a total of 28 pins, each serving a specific purpose. The pin configuration is as follows:
- VDD - Power supply voltage
- VSS - Ground
- RA0 - General-purpose I/O pin
- RA1 - General-purpose I/O pin
- RA2 - General-purpose I/O pin
- RA3 - General-purpose I/O pin
- RA4 - General-purpose I/O pin
- RA5 - General-purpose I/O pin
- RB0 - General-purpose I/O pin
- RB1 - General-purpose I/O pin
- RB2 - General-purpose I/O pin
- RB3 - General-purpose I/O pin
- RB4 - General-purpose I/O pin
- RB5 - General-purpose I/O pin
- RB6 - General-purpose I/O pin
- RB7 - General-purpose I/O pin
- RB8 - General-purpose I/O pin
- RB9 - General-purpose I/O pin
- RB10 - General-purpose I/O pin
- RB11 - General-purpose I/O pin
- RB12 - General-purpose I/O pin
- RB13 - General-purpose I/O pin
- RB14 - General-purpose I/O pin
- RB15 - General-purpose I/O pin
- VCAP - Capacitor connection for internal voltage regulator
- VSS - Ground
- OSC1/CLKI - Oscillator input/clock input
- OSC2/CLKO - Oscillator output/clock output
Functional Features
- High-speed processing capabilities
- Enhanced control and communication interfaces
- Flexible I/O configurations
- Analog-to-digital conversion for sensor interfacing
- Timers/counters for precise timing operations
- Low power consumption modes for energy efficiency
- Built-in security features for data protection
Advantages and Disadvantages
Advantages
- Powerful performance with a 16-bit architecture
- Wide operating voltage range allows for versatile applications
- Integrated peripherals reduce the need for external components
- Low power consumption extends battery life in portable devices
- Ample memory capacity for storing program code and data
Disadvantages
- Limited number of I/O pins may restrict the connectivity options in complex systems
- Higher cost compared to lower-end microcontrollers with similar specifications
- Steeper learning curve for beginners due to the complexity of 16-bit architecture
Working Principles
The PIC24F16KM102T-I/SO operates based on the principles of digital logic and microcontroller architecture. It executes instructions stored in its program memory, processes data, and controls various peripherals and I/O devices according to the program code.
Detailed Application Field Plans
The PIC24F16KM102T-I/SO finds applications in a wide range of fields, including but not limited to: - Industrial automation - Consumer electronics - Medical devices - Automotive systems - Home automation - Internet of Things (IoT) devices
Detailed and Complete Alternative Models
- PIC24F08KM101T-I/SO: Similar microcontroller with reduced program memory size and I/O pins.
- PIC24F32KA302-I/SO: Higher-end microcontroller with increased program memory size and advanced peripherals.
- PIC
Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi PIC24F16KM102T-I/SO dalam penyelesaian teknikal
What is the maximum operating frequency of PIC24F16KM102T-I/SO?
- The maximum operating frequency of PIC24F16KM102T-I/SO is 32 MHz.What are the key features of PIC24F16KM102T-I/SO?
- Some key features of PIC24F16KM102T-I/SO include 16 KB of flash memory, 2 KB of RAM, and multiple communication interfaces.Can PIC24F16KM102T-I/SO be used in battery-powered applications?
- Yes, PIC24F16KM102T-I/SO is suitable for battery-powered applications due to its low power consumption features.What development tools are available for programming PIC24F16KM102T-I/SO?
- Development tools such as MPLAB X IDE and MPLAB XC16 Compiler can be used for programming PIC24F16KM102T-I/SO.Is PIC24F16KM102T-I/SO suitable for motor control applications?
- Yes, PIC24F16KM102T-I/SO is well-suited for motor control applications due to its integrated peripherals and high-performance core.Can PIC24F16KM102T-I/SO be used in industrial automation systems?
- Yes, PIC24F16KM102T-I/SO is commonly used in industrial automation systems due to its robust features and reliability.What communication interfaces are supported by PIC24F16KM102T-I/SO?
- PIC24F16KM102T-I/SO supports communication interfaces such as UART, SPI, and I2C, making it versatile for various applications.Is PIC24F16KM102T-I/SO suitable for real-time control applications?
- Yes, PIC24F16KM102T-I/SO is suitable for real-time control applications due to its deterministic operation and interrupt handling capabilities.What are the temperature range specifications for PIC24F16KM102T-I/SO?
- PIC24F16KM102T-I/SO has a wide operating temperature range from -40°C to 125°C, making it suitable for harsh environments.Are there any application notes or reference designs available for PIC24F16KM102T-I/SO?
- Yes, Microchip provides application notes and reference designs to assist with the implementation of PIC24F16KM102T-I/SO in various technical solutions.