Microchip Technology
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
PIC16C74BT-04/L
Lihat Butiran Helaian data

PIC16C74BT-04/L

Product Overview

Category

The PIC16C74BT-04/L belongs to the category of microcontrollers.

Use

It is commonly used in various electronic applications that require embedded control and processing capabilities.

Characteristics

  • Microcontroller with 8-bit architecture
  • Low power consumption
  • High performance
  • Wide operating voltage range
  • Integrated peripherals for enhanced functionality

Package

The PIC16C74BT-04/L is available in a compact package, which ensures easy integration into electronic circuits.

Essence

The essence of the PIC16C74BT-04/L lies in its ability to provide efficient control and processing capabilities in a small form factor.

Packaging/Quantity

The PIC16C74BT-04/L is typically packaged in reels or tubes, with a quantity of 1000 units per package.

Specifications

  • Architecture: 8-bit
  • Program Memory Size: 4KB
  • RAM Size: 192 bytes
  • Number of I/O Pins: 33
  • Operating Voltage Range: 2.5V to 5.5V
  • Maximum Clock Frequency: 20 MHz
  • Communication Interfaces: USART, SPI, I2C
  • Timers/Counters: 3
  • Analog-to-Digital Converter (ADC): 8 channels, 10-bit resolution

Detailed Pin Configuration

The PIC16C74BT-04/L has a total of 40 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. RA0 - General-purpose I/O pin
  3. RA1 - General-purpose I/O pin
  4. RA2 - General-purpose I/O pin
  5. RA3 - General-purpose I/O pin
  6. RA4 - General-purpose I/O pin
  7. RA5 - General-purpose I/O pin
  8. MCLR - Master Clear input
  9. VSS - Ground
  10. RB0 - General-purpose I/O pin
  11. RB1 - General-purpose I/O pin
  12. RB2 - General-purpose I/O pin
  13. RB3 - General-purpose I/O pin
  14. RB4 - General-purpose I/O pin
  15. RB5 - General-purpose I/O pin
  16. RB6 - General-purpose I/O pin
  17. RB7 - General-purpose I/O pin
  18. VDD - Power supply voltage
  19. OSC1 - Oscillator input
  20. OSC2 - Oscillator output
  21. RC0 - General-purpose I/O pin
  22. RC1 - General-purpose I/O pin
  23. RC2 - General-purpose I/O pin
  24. RC3 - General-purpose I/O pin
  25. RC4 - General-purpose I/O pin
  26. RC5 - General-purpose I/O pin
  27. RC6 - General-purpose I/O pin
  28. RC7 - General-purpose I/O pin
  29. VSS - Ground
  30. RD0 - General-purpose I/O pin
  31. RD1 - General-purpose I/O pin
  32. RD2 - General-purpose I/O pin
  33. RD3 - General-purpose I/O pin
  34. RD4 - General-purpose I/O pin
  35. RD5 - General-purpose I/O pin
  36. RD6 - General-purpose I/O pin
  37. RD7 - General-purpose I/O pin
  38. VDD - Power supply voltage
  39. VSS - Ground
  40. RB3/PGM - Programming mode selection

Functional Features

The PIC16C74BT-04/L offers the following functional features:

  • High-performance RISC CPU
  • Flash program memory for easy reprogramming
  • EEPROM data memory for non-volatile storage
  • Integrated peripherals such as USART, SPI, and I2C for communication
  • Timers/Counters for precise timing operations
  • Analog-to-Digital Converter (ADC) for analog signal processing

Advantages and Disadvantages

Advantages

  • Compact size and low power consumption make it suitable for portable devices
  • Wide operating voltage range allows for flexibility in various applications
  • Integrated peripherals reduce the need for external components
  • Flash program memory enables easy reprogramming

Disadvantages

  • Limited program memory size may restrict complex applications
  • Limited RAM size may pose challenges for data-intensive operations
  • Lack of advanced features compared to more modern microcontrollers

Working Principles

The PIC16C74BT-04/L operates based on a RISC (Reduced Instruction Set Computer) architecture. It executes instructions stored in its program memory and performs various tasks based on the input/output signals received through its pins. The microcontroller's CPU processes these instructions to control connected devices or perform calculations.

Detailed Application Field Plans

The PIC16C74BT-04/L finds applications

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi PIC16C74BT-04/L dalam penyelesaian teknikal

  1. What is the maximum operating frequency of PIC16C74BT-04/L?
    - The maximum operating frequency of PIC16C74BT-04/L is 4 MHz.

  2. What are the key features of PIC16C74BT-04/L?
    - Some key features of PIC16C74BT-04/L include 33 I/O pins, 192 bytes of RAM, and 4 channels of 8-bit analog-to-digital conversion.

  3. Can PIC16C74BT-04/L be used in battery-powered applications?
    - Yes, PIC16C74BT-04/L can be used in battery-powered applications due to its low power consumption.

  4. How many timers does PIC16C74BT-04/L have?
    - PIC16C74BT-04/L has three timers: Timer0, Timer1, and Timer2.

  5. What programming language is commonly used to program PIC16C74BT-04/L?
    - Assembly language is commonly used to program PIC16C74BT-04/L.

  6. Is PIC16C74BT-04/L suitable for temperature sensing applications?
    - Yes, PIC16C74BT-04/L can be used in temperature sensing applications with the help of external temperature sensors.

  7. Can PIC16C74BT-04/L communicate with other devices using serial communication?
    - Yes, PIC16C74BT-04/L supports serial communication protocols such as UART and SPI.

  8. What is the operating voltage range of PIC16C74BT-04/L?
    - The operating voltage range of PIC16C74BT-04/L is typically 2.0V to 5.5V.

  9. Does PIC16C74BT-04/L have built-in EEPROM memory?
    - No, PIC16C74BT-04/L does not have built-in EEPROM memory.

  10. Can PIC16C74BT-04/L be used in industrial control applications?
    - Yes, PIC16C74BT-04/L is suitable for industrial control applications due to its robust features and reliability.