Microchip Technology
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
PIC16C64AT-04/PQ
Lihat Butiran Helaian data

PIC16C64AT-04/PQ

Product Overview

Category

The PIC16C64AT-04/PQ belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic applications that require embedded control and processing capabilities.

Characteristics

  • High-performance 8-bit RISC architecture
  • Flash-based program memory
  • Low power consumption
  • Wide operating voltage range
  • Integrated peripherals for enhanced functionality

Package

The PIC16C64AT-04/PQ is available in a PQFP package (Plastic Quad Flat Pack).

Essence

The essence of this microcontroller lies in its ability to provide efficient and reliable control and processing capabilities in a compact and low-power package.

Packaging/Quantity

The PIC16C64AT-04/PQ is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Microcontroller Family: PIC16
  • CPU Speed: 4 MHz
  • Program Memory Size: 8 KB
  • RAM Size: 368 bytes
  • Number of I/O Pins: 22
  • Operating Voltage Range: 2.5V - 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Data Bus Width: 8 bits
  • Number of Timers/Counters: 3
  • Analog-to-Digital Converter (ADC): 8 channels, 10-bit resolution

Detailed Pin Configuration

The PIC16C64AT-04/PQ has a total of 44 pins. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. RA0 - General-purpose I/O pin
  3. RA1 - General-purpose I/O pin
  4. RA2 - General-purpose I/O pin
  5. RA3 - General-purpose I/O pin
  6. RA4 - General-purpose I/O pin
  7. RA5 - General-purpose I/O pin
  8. MCLR/VPP - Master Clear input/Voltage Programming Pin
  9. VSS - Ground
  10. OSC1/CLKIN - Oscillator input/Clock input
  11. OSC2/CLKOUT - Oscillator output/Clock output
  12. RC0 - General-purpose I/O pin
  13. RC1 - General-purpose I/O pin
  14. RC2 - General-purpose I/O pin
  15. RC3 - General-purpose I/O pin
  16. RC4 - General-purpose I/O pin
  17. RC5 - General-purpose I/O pin
  18. RB0/INT - General-purpose I/O pin/External Interrupt input
  19. RB1 - General-purpose I/O pin
  20. RB2 - General-purpose I/O pin
  21. RB3 - General-purpose I/O pin
  22. RB4 - General-purpose I/O pin
  23. RB5 - General-purpose I/O pin
  24. RB6 - General-purpose I/O pin
  25. RB7 - General-purpose I/O pin
  26. VDD - Power supply voltage
  27. RD0 - General-purpose I/O pin
  28. RD1 - General-purpose I/O pin
  29. RD2 - General-purpose I/O pin
  30. RD3 - General-purpose I/O pin
  31. RD4 - General-purpose I/O pin
  32. RD5 - General-purpose I/O pin
  33. RD6 - General-purpose I/O pin
  34. RD7 - General-purpose I/O pin
  35. VSS - Ground
  36. VDD - Power supply voltage
  37. RE0 - General-purpose I/O pin
  38. RE1 - General-purpose I/O pin
  39. RE2 - General-purpose I/O pin
  40. RE3 - General-purpose I/O pin
  41. RE4 - General-purpose I/O pin
  42. RE5 - General-purpose I/O pin
  43. RE6 - General-purpose I/O pin
  44. RE7 - General-purpose I/O pin

Functional Features

  • High-speed processing capabilities
  • Flash memory for easy program updates
  • Integrated peripherals such as timers, counters, and ADC
  • Low power consumption for extended battery life
  • Wide operating voltage range for flexibility in different applications

Advantages and Disadvantages

Advantages

  • Efficient and reliable control and processing capabilities
  • Compact size for space-constrained applications
  • Low power consumption for energy-efficient designs
  • Wide operating voltage range for versatility
  • Integrated peripherals enhance functionality and reduce external component count

Disadvantages

  • Limited program memory size (8 KB)
  • Limited RAM size (368 bytes)
  • Lack of advanced features found in higher-end microcontrollers

Working Principles

The PIC16C64AT-04/PQ operates based on an 8-bit RISC architecture. It executes instructions stored in its flash memory to perform various tasks. The

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi PIC16C64AT-04/PQ dalam penyelesaian teknikal

  1. What is the operating voltage range of PIC16C64AT-04/PQ?
    - The operating voltage range of PIC16C64AT-04/PQ is 2.0V to 5.5V.

  2. What is the maximum frequency at which PIC16C64AT-04/PQ can operate?
    - PIC16C64AT-04/PQ can operate at a maximum frequency of 4 MHz.

  3. Can PIC16C64AT-04/PQ be used in battery-powered applications?
    - Yes, PIC16C64AT-04/PQ's low operating voltage range makes it suitable for battery-powered applications.

  4. What are the key features of PIC16C64AT-04/PQ?
    - Some key features of PIC16C64AT-04/PQ include 14-bit instruction set, 8-bit CPU core, and 33 I/O pins.

  5. Is PIC16C64AT-04/PQ suitable for temperature-sensitive applications?
    - Yes, PIC16C64AT-04/PQ has a wide operating temperature range, making it suitable for temperature-sensitive applications.

  6. Can PIC16C64AT-04/PQ be programmed using standard programming tools?
    - Yes, PIC16C64AT-04/PQ can be programmed using standard programming tools such as MPLAB® ICD 4 or PICkit™ 4.

  7. What communication interfaces does PIC16C64AT-04/PQ support?
    - PIC16C64AT-04/PQ supports serial communication interfaces such as SPI and I2C.

  8. Is PIC16C64AT-04/PQ suitable for motor control applications?
    - Yes, PIC16C64AT-04/PQ can be used for simple motor control applications due to its GPIO capabilities.

  9. Can PIC16C64AT-04/PQ be used in industrial automation applications?
    - Yes, PIC16C64AT-04/PQ's robust design and communication capabilities make it suitable for industrial automation applications.

  10. What development tools are available for PIC16C64AT-04/PQ?
    - Development tools such as MPLAB X IDE and MPLAB Code Configurator can be used for programming and development with PIC16C64AT-04/PQ.