Microchip Technology
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
KSZ8031RNLI-TR
Lihat Butiran Helaian data

KSZ8031RNLI-TR

Product Overview

Category

The KSZ8031RNLI-TR belongs to the category of Ethernet Physical Layer Transceivers.

Use

It is primarily used for providing physical layer connectivity in Ethernet communication systems.

Characteristics

  • Supports 10/100 Mbps data rates
  • Low power consumption
  • Integrated termination resistors
  • Robust performance in noisy environments
  • Small form factor

Package

The KSZ8031RNLI-TR comes in a small package, suitable for surface mount technology (SMT) assembly.

Essence

This transceiver is an essential component for establishing reliable Ethernet connections in various electronic devices.

Packaging/Quantity

The KSZ8031RNLI-TR is typically packaged in reels and is available in large quantities to meet production demands.

Specifications

  • Data Rates: 10/100 Mbps
  • Supply Voltage: 3.3V
  • Operating Temperature Range: -40°C to +85°C
  • Interface: MII/RMII
  • Package Type: QFN

Detailed Pin Configuration

The KSZ8031RNLI-TR has a total of 32 pins. The pin configuration is as follows:

  1. VDDA
  2. VDDC
  3. VDDIO
  4. VDDPLL
  5. VDDXTAL
  6. VDDREF
  7. VDDRX
  8. VDDTX
  9. GND
  10. GND
  11. GND
  12. GND
  13. GND
  14. GND
  15. GND
  16. GND
  17. TXEN
  18. TXD0
  19. TXD1
  20. TXD2
  21. TXD3
  22. CRS
  23. RXD0
  24. RXD1
  25. RXD2
  26. RXD3
  27. RXER
  28. RXDV
  29. MDC
  30. MDIO
  31. REFCLK
  32. RESET

Functional Features

  • Auto-negotiation for link speed and duplex mode
  • Supports Energy Efficient Ethernet (EEE)
  • Integrated loopback modes for diagnostics
  • Supports IEEE 1588 Precision Time Protocol (PTP)

Advantages and Disadvantages

Advantages

  • Low power consumption
  • Robust performance in noisy environments
  • Small form factor allows for space-saving designs
  • Supports advanced features like EEE and PTP

Disadvantages

  • Limited to 10/100 Mbps data rates, not suitable for higher-speed applications

Working Principles

The KSZ8031RNLI-TR transceiver operates by converting digital data into analog signals for transmission over Ethernet cables. It also receives analog signals and converts them back into digital data for further processing.

Detailed Application Field Plans

The KSZ8031RNLI-TR is widely used in various applications, including: - Network switches - Routers - Industrial automation systems - Embedded systems - Internet of Things (IoT) devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to the KSZ8031RNLI-TR are: - KSZ8081MNX-TR - DP83848IVVX/NOPB - LAN8720AI-CP-TR

These models offer similar functionality and can be used as replacements depending on specific requirements.

Word count: 389

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi KSZ8031RNLI-TR dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of KSZ8031RNLI-TR in technical solutions:

Q1: What is the KSZ8031RNLI-TR? A1: The KSZ8031RNLI-TR is a single-port 10/100 Ethernet physical layer transceiver (PHY) chip designed for use in various networking applications.

Q2: What are the key features of the KSZ8031RNLI-TR? A2: Some key features of the KSZ8031RNLI-TR include support for MII/RMII interfaces, auto-negotiation, energy-efficient Ethernet (EEE), and various diagnostic capabilities.

Q3: How can I interface the KSZ8031RNLI-TR with a microcontroller or processor? A3: The KSZ8031RNLI-TR supports both MII (Media Independent Interface) and RMII (Reduced Media Independent Interface) interfaces, allowing you to easily connect it to a microcontroller or processor.

Q4: Can the KSZ8031RNLI-TR be used in industrial applications? A4: Yes, the KSZ8031RNLI-TR is suitable for industrial applications as it operates over an extended temperature range and has built-in ESD protection.

Q5: Does the KSZ8031RNLI-TR support auto-negotiation? A5: Yes, the KSZ8031RNLI-TR supports auto-negotiation, which allows it to automatically determine the best possible connection speed and duplex mode.

Q6: Can the KSZ8031RNLI-TR be powered using a single supply voltage? A6: Yes, the KSZ8031RNLI-TR can be powered using a single supply voltage, typically ranging from 2.97V to 3.63V.

Q7: What is the maximum data rate supported by the KSZ8031RNLI-TR? A7: The KSZ8031RNLI-TR supports both 10Mbps and 100Mbps data rates, depending on the negotiated connection speed.

Q8: Does the KSZ8031RNLI-TR support energy-efficient Ethernet (EEE)? A8: Yes, the KSZ8031RNLI-TR supports energy-efficient Ethernet (EEE), which helps reduce power consumption during periods of low network activity.

Q9: Can I monitor the link status and perform diagnostics using the KSZ8031RNLI-TR? A9: Yes, the KSZ8031RNLI-TR provides various diagnostic features, including link status detection, loopback modes, and LED indicators for easy monitoring.

Q10: Is the KSZ8031RNLI-TR compatible with existing Ethernet standards? A10: Yes, the KSZ8031RNLI-TR is fully compliant with IEEE 802.3 and supports standard Ethernet protocols, making it compatible with existing networking infrastructure.

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.