ATTINY261V-10PU

Product Overview

Category

The ATTINY261V-10PU belongs to the category of microcontrollers.

Use

It is commonly used in various electronic devices and systems that require a compact and low-power microcontroller for control and processing tasks.

Characteristics

• Low power consumption
• Compact size
• High-performance 8-bit AVR microcontroller
• Wide operating voltage range
• Flash memory for program storage
• EEPROM for data storage
• Multiple communication interfaces (SPI, I2C)
• Analog-to-digital converter (ADC)
• Timers and counters for precise timing operations

Package

The ATTINY261V-10PU is available in a PDIP package, which stands for Plastic Dual In-line Package. This package type allows for easy integration onto printed circuit boards (PCBs) and facilitates soldering.

Essence

The essence of the ATTINY261V-10PU lies in its ability to provide efficient control and processing capabilities in a small form factor, making it suitable for applications with limited space and power constraints.

Packaging/Quantity

The ATTINY261V-10PU is typically packaged in tubes or trays, with each tube or tray containing a specific quantity of microcontrollers. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

• Microcontroller architecture: AVR
• CPU frequency: 10 MHz
• Flash memory: 2 KB
• RAM: 128 bytes
• EEPROM: 128 bytes
• Operating voltage: 1.8V - 5.5V
• Digital I/O pins: 18
• Analog input channels: 8
• Communication interfaces: SPI, I2C
• Timers/counters: 3
• ADC resolution: 10-bit
• Package type: PDIP

Detailed Pin Configuration

The ATTINY261V-10PU has a total of 20 pins, each serving a specific purpose. The pin configuration is as follows:

1. RESET - Reset pin
2. PCINT0/CLKI - Pin Change Interrupt 0 / External Clock Input
3. PD0/AIN0 - Port D, Bit 0 / Analog Input 0
4. PD1/AIN1 - Port D, Bit 1 / Analog Input 1
5. PD2/INT0 - Port D, Bit 2 / External Interrupt 0
6. PD3/INT1 - Port D, Bit 3 / External Interrupt 1
7. PD4/T0 - Port D, Bit 4 / Timer/Counter 0
8. PD5/SS - Port D, Bit 5 / Slave Select (SPI)
9. PD6/MOSI - Port D, Bit 6 / Master Out Slave In (SPI)
10. PD7/MISO - Port D, Bit 7 / Master In Slave Out (SPI)
11. PB0/ICP1 - Port B, Bit 0 / Input Capture 1
12. PB1/OC1A - Port B, Bit 1 / Output Compare 1A
13. PB2/OC1B - Port B, Bit 2 / Output Compare 1B
14. PB3/OC2 - Port B, Bit 3 / Output Compare 2
15. PB4/SS - Port B, Bit 4 / Slave Select (SPI)
16. PB5/MOSI - Port B, Bit 5 / Master Out Slave In (SPI)
17. PB6/MISO - Port B, Bit 6 / Master In Slave Out (SPI)
18. PB7/SCK - Port B, Bit 7 / Serial Clock (SPI)
19. AVCC - Analog VCC
20. GND - Ground

Functional Features

The ATTINY261V-10PU offers several functional features that enhance its usability and performance:

1. Low power consumption: The microcontroller is designed to operate efficiently, minimizing power consumption and extending battery life in portable devices.
2. Flash memory: The built-in flash memory allows for program storage, enabling the microcontroller to execute instructions and perform tasks.
3. EEPROM: The Electrically Erasable Programmable Read-Only Memory (EEPROM) provides non-volatile data storage, allowing the microcontroller to retain important information even when powered off.
4. Communication interfaces: The SPI and I2C interfaces enable seamless communication with other devices, facilitating data exchange and control.
5. Timers and counters: The integrated timers and counters allow precise timing operations, making it suitable for applications that require accurate timekeeping or event triggering.
6. Analog-to-digital converter (ADC): The ADC enables the microcontroller to convert analog signals into digital values, expanding its capabilities in sensor-based applications.

Advantages and Disadvantages

Advantages

• Compact size and low power