Microchip Technology
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
ATSAM4SA16CA-AU
Lihat Butiran Helaian data

ATSAM4SA16CA-AU

Product Overview

Category: Microcontroller
Use: Embedded systems, Internet of Things (IoT) devices
Characteristics: High-performance, low-power consumption, advanced peripherals
Package: AU (TQFP-100)
Essence: ARM Cortex-M4 based microcontroller
Packaging/Quantity: Tray packaging, 250 units per tray

Specifications

  • Microcontroller Core: ARM Cortex-M4
  • Operating Frequency: Up to 120 MHz
  • Flash Memory: 1 MB
  • SRAM: 160 KB
  • EEPROM: 16 KB
  • Digital I/O Pins: 80
  • Analog Inputs: 16
  • Serial Communication Interfaces: UART, SPI, I2C
  • Timers/Counters: 6
  • ADC Resolution: 12-bit
  • Operating Voltage: 1.62V - 3.6V
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The ATSAM4SA16CA-AU microcontroller has a total of 100 pins in the TQFP package. The pin configuration is as follows:

  • Pins 1-10: Analog inputs
  • Pins 11-90: Digital I/O pins
  • Pins 91-96: Serial communication interfaces (UART, SPI, I2C)
  • Pins 97-100: Power supply and ground pins

Functional Features

  • High-performance ARM Cortex-M4 core for efficient processing
  • Advanced peripherals for enhanced functionality
  • Low-power consumption for energy-efficient designs
  • Ample memory capacity for storing program code and data
  • Multiple serial communication interfaces for seamless connectivity
  • Rich set of timers/counters for precise timing operations
  • High-resolution ADC for accurate analog signal acquisition

Advantages and Disadvantages

Advantages: - Powerful processing capabilities - Versatile range of peripherals - Low power consumption - Ample memory capacity

Disadvantages: - Relatively high cost compared to simpler microcontrollers - Steeper learning curve for beginners

Working Principles

The ATSAM4SA16CA-AU microcontroller operates based on the ARM Cortex-M4 architecture. It executes instructions stored in its flash memory, interacts with external devices through its various peripherals, and processes data according to the program code running on it. The microcontroller can be programmed using a variety of development tools and programming languages.

Detailed Application Field Plans

The ATSAM4SA16CA-AU microcontroller finds applications in various fields, including but not limited to:

  1. Industrial automation
  2. Home automation
  3. Internet of Things (IoT) devices
  4. Consumer electronics
  5. Automotive systems
  6. Medical devices
  7. Robotics

Detailed and Complete Alternative Models

  1. ATSAM4S8BA-AU: Similar microcontroller with lower flash memory and fewer I/O pins.
  2. ATSAM4SD32CA-AU: Similar microcontroller with higher flash memory and additional features.
  3. ATSAM4SC16CA-AU: Similar microcontroller with lower flash memory but higher operating temperature range.

These alternative models offer different specifications and features to cater to specific application requirements.

Word count: 340 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi ATSAM4SA16CA-AU dalam penyelesaian teknikal

  1. Question: What is the ATSAM4SA16CA-AU?
    Answer: The ATSAM4SA16CA-AU is a microcontroller from Microchip's SAM4S series, designed for use in technical solutions.

  2. Question: What are the key features of the ATSAM4SA16CA-AU?
    Answer: Some key features of the ATSAM4SA16CA-AU include a 32-bit ARM Cortex-M4 processor, 16KB of RAM, 256KB of flash memory, multiple communication interfaces, and various peripherals.

  3. Question: What are the typical applications of the ATSAM4SA16CA-AU?
    Answer: The ATSAM4SA16CA-AU can be used in a wide range of applications such as industrial automation, consumer electronics, smart energy, and automotive systems.

  4. Question: Can I program the ATSAM4SA16CA-AU using C/C++?
    Answer: Yes, the ATSAM4SA16CA-AU can be programmed using C/C++ programming languages, along with development tools like Atmel Studio or third-party IDEs.

  5. Question: Does the ATSAM4SA16CA-AU support real-time operating systems (RTOS)?
    Answer: Yes, the ATSAM4SA16CA-AU is compatible with various RTOS options, including FreeRTOS and Micrium µC/OS.

  6. Question: How many communication interfaces does the ATSAM4SA16CA-AU have?
    Answer: The ATSAM4SA16CA-AU has multiple communication interfaces, including UART, SPI, I2C, USB, and CAN.

  7. Question: Can I connect external sensors or devices to the ATSAM4SA16CA-AU?
    Answer: Yes, the ATSAM4SA16CA-AU has a range of general-purpose I/O pins that can be used to connect external sensors, devices, or peripherals.

  8. Question: What is the power supply voltage range for the ATSAM4SA16CA-AU?
    Answer: The ATSAM4SA16CA-AU operates with a power supply voltage range of 1.62V to 3.6V.

  9. Question: Does the ATSAM4SA16CA-AU have built-in security features?
    Answer: Yes, the ATSAM4SA16CA-AU includes hardware security features such as a True Random Number Generator (TRNG) and cryptographic acceleration.

  10. Question: Is there any documentation available for the ATSAM4SA16CA-AU?
    Answer: Yes, Microchip provides comprehensive documentation, including datasheets, application notes, and user manuals, which can be accessed on their website.