Microchip Technology
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
AT90S2323-10PC
Lihat Butiran Helaian data

AT90S2323-10PC

Product Overview

Category

AT90S2323-10PC belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and systems for controlling and processing data.

Characteristics

  • Low-power consumption
  • High-performance
  • Compact size
  • Versatile functionality

Package

AT90S2323-10PC is available in a 20-pin DIP (Dual Inline Package) format.

Essence

The essence of AT90S2323-10PC lies in its ability to provide efficient control and processing capabilities in a compact form factor.

Packaging/Quantity

AT90S2323-10PC is typically packaged in reels or tubes, with each package containing a specific quantity of microcontrollers.

Specifications

  • Operating Voltage: 2.7V - 5.5V
  • Clock Frequency: 10 MHz
  • Flash Memory: 2 KB
  • RAM: 128 bytes
  • EEPROM: 128 bytes
  • I/O Pins: 18
  • Timers/Counters: 2
  • Communication Interfaces: SPI, USART

Detailed Pin Configuration

  1. RESET: Reset pin
  2. VCC: Power supply voltage
  3. GND: Ground
  4. XTAL1: Crystal oscillator input
  5. XTAL2: Crystal oscillator output
  6. PORTB0: General-purpose I/O pin
  7. PORTB1: General-purpose I/O pin
  8. PORTB2: General-purpose I/O pin
  9. PORTB3: General-purpose I/O pin
  10. PORTB4: General-purpose I/O pin
  11. PORTB5: General-purpose I/O pin
  12. PORTB6: General-purpose I/O pin
  13. PORTB7: General-purpose I/O pin
  14. RESET: Reset pin
  15. VCC: Power supply voltage
  16. GND: Ground
  17. PORTD0: General-purpose I/O pin
  18. PORTD1: General-purpose I/O pin
  19. PORTD2: General-purpose I/O pin
  20. PORTD3: General-purpose I/O pin

Functional Features

  • High-speed processing capabilities
  • On-chip flash memory for program storage
  • Built-in EEPROM for data storage
  • Multiple communication interfaces for data exchange
  • Timers and counters for precise timing operations
  • GPIO pins for interfacing with external devices

Advantages and Disadvantages

Advantages

  • Low power consumption, suitable for battery-powered applications
  • Compact size allows for integration into small form factor devices
  • Versatile functionality enables a wide range of applications
  • Cost-effective solution for embedded systems

Disadvantages

  • Limited program and data storage capacity compared to higher-end microcontrollers
  • Relatively lower clock frequency may restrict performance in certain applications

Working Principles

AT90S2323-10PC operates based on the principles of digital logic and microcontroller architecture. It executes instructions stored in its flash memory, processes data using its internal resources, and communicates with external devices through its I/O pins and communication interfaces.

Detailed Application Field Plans

AT90S2323-10PC finds applications in various fields, including but not limited to: - Home automation systems - Industrial control systems - Consumer electronics - Automotive electronics - Medical devices - Internet of Things (IoT) devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to AT90S2323-10PC are: - ATtiny2313A - PIC16F628A - MSP430G2231 - STM8S003F3

These alternatives provide comparable features and can be considered based on specific project requirements.

Word count: 498 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi AT90S2323-10PC dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of AT90S2323-10PC in technical solutions:

  1. Q: What is the AT90S2323-10PC microcontroller used for? A: The AT90S2323-10PC is a microcontroller commonly used in various technical solutions, such as embedded systems, robotics, automation, and control applications.

  2. Q: What is the operating voltage range of the AT90S2323-10PC? A: The AT90S2323-10PC operates within a voltage range of 2.7V to 5.5V.

  3. Q: How much flash memory does the AT90S2323-10PC have? A: The AT90S2323-10PC has 2KB (2048 bytes) of flash memory for program storage.

  4. Q: Can I use the AT90S2323-10PC for analog signal processing? A: No, the AT90S2323-10PC does not have built-in analog-to-digital converters (ADCs). It is primarily designed for digital signal processing.

  5. Q: What communication interfaces are available on the AT90S2323-10PC? A: The AT90S2323-10PC supports a Universal Synchronous/Asynchronous Receiver/Transmitter (USART) for serial communication.

  6. Q: How many I/O pins does the AT90S2323-10PC have? A: The AT90S2323-10PC has a total of 18 I/O pins, which can be configured as inputs or outputs.

  7. Q: What is the maximum clock frequency of the AT90S2323-10PC? A: The AT90S2323-10PC can operate at a maximum clock frequency of 10 MHz.

  8. Q: Can I use the AT90S2323-10PC in battery-powered applications? A: Yes, the low operating voltage range and power-saving features make the AT90S2323-10PC suitable for battery-powered applications.

  9. Q: Is the AT90S2323-10PC compatible with Arduino IDE? A: No, the AT90S2323-10PC is not officially supported by the Arduino IDE. However, it can be programmed using other development tools like Atmel Studio or AVR-GCC.

  10. Q: Are there any limitations or considerations when using the AT90S2323-10PC? A: Some considerations include limited flash memory size, lack of built-in peripherals like ADCs, and the need for external components for certain functionalities like USB communication or external memory expansion.