AT90S2313-10SC

Product Overview

Category

The AT90S2313-10SC belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic applications that require embedded control and processing capabilities.

Characteristics

• Low-power consumption
• High-performance RISC architecture
• In-system programmable
• 2KB of Flash memory
• 128 bytes of EEPROM
• 128 bytes of SRAM
• 15 general-purpose I/O lines
• 32 general-purpose working registers
• 8-channel, 10-bit ADC
• Full-duplex UART
• Two 8-bit timer/counters with PWM
• One 16-bit timer/counter with PWM
• Programmable Watchdog Timer (WDT)
• Internal and external interrupts

Package

The AT90S2313-10SC is available in a 20-pin Small-Outline Integrated Circuit (SOIC) package.

Essence

The essence of the AT90S2313-10SC lies in its ability to provide a compact and versatile solution for controlling and managing various electronic systems.

Packaging/Quantity

The AT90S2313-10SC is typically sold in reels or tubes, with quantities varying depending on the supplier.

Specifications

• Operating Voltage: 2.7V to 5.5V
• Clock Speed: Up to 10 MHz
• Flash Memory: 2KB
• EEPROM: 128 bytes
• SRAM: 128 bytes
• I/O Lines: 15
• ADC Channels: 8
• Timers/Counters: 3 (2x 8-bit, 1x 16-bit)
• UART: Full-duplex
• Watchdog Timer: Programmable

Detailed Pin Configuration

The AT90S2313-10SC has a total of 20 pins, each serving a specific purpose. The pin configuration is as follows:

1. Reset (RESET)
2. External Interrupt 0 (INT0)
3. Port B, Bit 0 (PB0)
4. Port B, Bit 1 (PB1)
5. Port B, Bit 2 (PB2)
6. Port B, Bit 3 (PB3)
7. Port B, Bit 4 (PB4)
8. Port B, Bit 5 (PB5)
9. Ground (GND)
10. VCC
11. XTAL2
12. XTAL1
13. Port D, Bit 0 (PD0)
14. Port D, Bit 1 (PD1)
15. Port D, Bit 2 (PD2)
16. Port D, Bit 3 (PD3)
17. Port D, Bit 4 (PD4)
18. Port D, Bit 5 (PD5)
19. Port D, Bit 6 (PD6)
20. Port D, Bit 7 (PD7)

Functional Features

The AT90S2313-10SC offers several functional features that make it suitable for a wide range of applications. These include:

• In-system programmability allows for easy firmware updates and modifications.
• Low-power consumption makes it ideal for battery-powered devices.
• High-performance RISC architecture ensures efficient execution of instructions.
• The built-in ADC enables analog signal acquisition and processing.
• Multiple timers/counters with PWM support facilitate precise timing and control.
• The full-duplex UART enables serial communication with other devices.
• Internal and external interrupts provide event-driven capabilities.

Advantages and Disadvantages

Advantages

• Compact size and low power consumption make it suitable for portable and battery-powered applications.
• In-system programmability allows for easy firmware updates and debugging.
• High-performance RISC architecture ensures efficient execution of instructions.
• Versatile I/O capabilities enable interfacing with various external devices.

Disadvantages

• Limited memory capacity may restrict the complexity of applications.
• Lack of built-in peripherals, such as USB or Ethernet, may require additional components for certain applications.
• Availability and support for this specific microcontroller may vary compared to more popular models.

Working Principles

The AT90S2313-10SC operates based on the principles of a RISC (Reduced Instruction Set Computer) architecture. It executes instructions stored in its Flash memory, utilizing the internal registers and peripherals to perform desired tasks. The microcontroller can be programmed using standard programming tools and languages, allowing developers to create custom firmware to control and manage various electronic systems.

Detailed Application Field Plans

The AT90S2313-10SC finds applications in various fields, including but not limited to:

1. Home automation systems
2. Industrial control systems
3. Robotics and automation
4. Sensor networks
5. Consumer electronics
6. Automotive electronics
7. Medical devices
8. Internet