AT28HC256E-12JI belongs to the category of high-speed, low-power Electrically Erasable Programmable Read-Only Memory (EEPROM) chips.
This product is primarily used for non-volatile data storage in various electronic devices such as microcontrollers, computers, and consumer electronics.
The AT28HC256E-12JI is available in a 32-pin plastic J-leaded chip carrier (PLCC) package. It is typically sold in reels containing multiple units.
The AT28HC256E-12JI has a total of 32 pins, which are assigned specific functions. Here is the detailed pin configuration:
The AT28HC256E-12JI utilizes EEPROM technology, which allows for electrically erasing and reprogramming data. It stores information using floating-gate transistors that can retain their charge even when the power is turned off. To read or write data, specific voltage levels are applied to the control pins, enabling the transfer of data between the memory cells and external devices.
The AT28HC256E-12JI finds applications in various fields, including: 1. Microcontrollers: It serves as non-volatile memory for program storage in microcontroller-based systems. 2. Computers: Used for storing BIOS (Basic Input/Output System) firmware and other critical data. 3. Consumer Electronics: Found in devices like digital cameras, set-top boxes, and smart home appliances for data storage purposes.
There are several alternative models available that offer similar functionality to the AT28HC256E-12JI. Some notable alternatives include: - AT28C256 - AT28HC256 - 27C256 - 29C256
These models may vary in terms of speed, power consumption, package type, or additional features, so it is important to consider specific requirements when selecting an alternative.
In conclusion, the AT28HC256E-12JI is a high-speed, low-power EEPROM chip with a large storage capacity. Its reliable performance, extended temperature range, and data protection features make it suitable for various applications in the field of microcontrollers, computers, and consumer electronics.
Sure! Here are 10 common questions and answers related to the application of AT28HC256E-12JI in technical solutions:
Q: What is the AT28HC256E-12JI? A: The AT28HC256E-12JI is a high-speed, low-power CMOS 256K (32K x 8) EEPROM memory chip.
Q: What are the key features of the AT28HC256E-12JI? A: Some key features include a 12ns access time, wide voltage range (2.7V to 5.5V), and a high endurance of 100,000 write cycles.
Q: How can I interface the AT28HC256E-12JI with a microcontroller? A: The AT28HC256E-12JI uses a standard parallel interface, making it compatible with most microcontrollers. You can connect it using address, data, and control lines.
Q: Can I use the AT28HC256E-12JI for program storage in embedded systems? A: Yes, the AT28HC256E-12JI can be used as program storage in embedded systems, especially when non-volatile memory is required.
Q: What is the maximum operating frequency of the AT28HC256E-12JI? A: The AT28HC256E-12JI can operate at frequencies up to 83MHz, allowing for fast data transfer.
Q: Is the AT28HC256E-12JI suitable for battery-powered devices? A: Yes, the AT28HC256E-12JI has a low power consumption, making it suitable for battery-powered devices where energy efficiency is important.
Q: Can I use the AT28HC256E-12JI in automotive applications? A: Yes, the AT28HC256E-12JI is designed to operate in a wide temperature range (-40°C to 85°C) and is suitable for automotive applications.
Q: Does the AT28HC256E-12JI support hardware write protection? A: Yes, the AT28HC256E-12JI has a built-in hardware write protection feature that allows you to protect specific memory areas from accidental writes.
Q: Can I use the AT28HC256E-12JI in industrial control systems? A: Absolutely, the AT28HC256E-12JI is designed to withstand harsh industrial environments and can be used in various industrial control systems.
Q: Are there any development tools or software available for the AT28HC256E-12JI? A: Yes, Atmel provides development tools and software, such as programming tools and libraries, to facilitate the integration of the AT28HC256E-12JI into your technical solutions.
Please note that these answers are general and may vary depending on specific application requirements.