Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
93LC56CT-I/MC

93LC56CT-I/MC

Product Overview

Category

The 93LC56CT-I/MC belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

It is used for non-volatile data storage in various electronic devices, including consumer electronics, automotive systems, and industrial applications.

Characteristics

  • Non-volatile memory
  • Small form factor
  • Low power consumption
  • High reliability

Package

The 93LC56CT-I/MC is available in a compact surface-mount package.

Essence

This EEPROM chip provides reliable and non-volatile data storage for electronic devices.

Packaging/Quantity

The 93LC56CT-I/MC is typically packaged in reels or tubes and is available in various quantities depending on the manufacturer's specifications.

Specifications

  • Memory Size: 2 Kbits
  • Interface: Serial
  • Operating Voltage: 2.5V - 5.5V
  • Maximum Clock Frequency: 2 MHz
  • Endurance: 1,000,000 write cycles
  • Data Retention: 200 years

Detailed Pin Configuration

The 93LC56CT-I/MC features a standard 8-pin configuration with specific pins dedicated to power, ground, clock, data input/output, and control signals.

Functional Features

  • Byte and Page Write Modes
  • Self-timed Erase/Write Cycle
  • Sequential Read Operation
  • Write Protect Feature
  • Schmitt Trigger Inputs

Advantages

  • Compact size
  • Low power consumption
  • High reliability and endurance
  • Wide operating voltage range

Disadvantages

  • Limited storage capacity compared to other memory technologies
  • Slower write speeds compared to volatile memory

Working Principles

The 93LC56CT-I/MC utilizes a floating gate transistor technology to store and retrieve data. When data is written, an electrical charge is trapped in the floating gate, altering the transistor's conductivity. This charge can be retained even when the power is removed, allowing for non-volatile data storage.

Detailed Application Field Plans

The 93LC56CT-I/MC is commonly used in: - Embedded systems - Automotive electronics - Industrial control systems - Smart meters - IoT devices

Detailed and Complete Alternative Models

  • 24LC256
  • 25AA256
  • AT24C256
  • CAT24C256

In conclusion, the 93LC56CT-I/MC is a versatile EEPROM chip that offers reliable non-volatile data storage for a wide range of electronic applications.

Word Count: 366

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi 93LC56CT-I/MC dalam penyelesaian teknikal

  1. What is the operating voltage range of 93LC56CT-I/MC?
    - The operating voltage range of 93LC56CT-I/MC is 2.5V to 5.5V.

  2. What is the maximum clock frequency supported by 93LC56CT-I/MC?
    - The maximum clock frequency supported by 93LC56CT-I/MC is 2MHz.

  3. Can 93LC56CT-I/MC be used in automotive applications?
    - Yes, 93LC56CT-I/MC is suitable for automotive applications.

  4. What is the typical write cycle time for 93LC56CT-I/MC?
    - The typical write cycle time for 93LC56CT-I/MC is 3ms.

  5. Is 93LC56CT-I/MC compatible with SPI interface?
    - Yes, 93LC56CT-I/MC is compatible with SPI interface.

  6. What is the temperature range for operation of 93LC56CT-I/MC?
    - The temperature range for operation of 93LC56CT-I/MC is -40°C to 125°C.

  7. Can 93LC56CT-I/MC be used in battery-powered devices?
    - Yes, 93LC56CT-I/MC can be used in battery-powered devices due to its low power consumption.

  8. Does 93LC56CT-I/MC support partial page writes?
    - Yes, 93LC56CT-I/MC supports partial page writes.

  9. What is the maximum endurance of 93LC56CT-I/MC?
    - The maximum endurance of 93LC56CT-I/MC is 1,000,000 erase/write cycles.

  10. Is 93LC56CT-I/MC RoHS compliant?
    - Yes, 93LC56CT-I/MC is RoHS compliant.