Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
93C86A-E/MS

93C86A-E/MS

Product Overview

Category

The 93C86A-E/MS belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

It is commonly used for non-volatile data storage in various electronic devices such as automotive, industrial, and consumer electronics.

Characteristics

  • Non-volatile memory
  • Electrically erasable and reprogrammable
  • Low power consumption
  • Small form factor

Package

The 93C86A-E/MS is typically available in a surface-mount package.

Essence

This EEPROM chip is essential for storing critical data that needs to be retained even when the power is turned off.

Packaging/Quantity

It is usually supplied in reels or tubes with varying quantities based on the manufacturer's specifications.

Specifications

  • Memory Capacity: 16 Kbits
  • Interface: SPI (Serial Peripheral Interface)
  • Operating Voltage: 2.5V - 5.5V
  • Operating Temperature Range: -40°C to 85°C
  • Data Retention: 100 years
  • Write Endurance: 1,000,000 cycles

Detailed Pin Configuration

The 93C86A-E/MS typically has 8 pins arranged as follows: 1. Chip Select (/CS) 2. Serial Data Input (DI) 3. Serial Data Output (DO) 4. Serial Clock (SCK) 5. Write Enable (/W) 6. VSS (Ground) 7. NC (No Connection) 8. VCC (Power Supply)

Functional Features

  • Byte and Page Write Modes
  • Self-timed Write Cycle
  • Power-Up/Down Protection
  • Sequential Read Operation

Advantages

  • Compact size
  • Low power consumption
  • High data retention
  • Ease of integration with microcontrollers

Disadvantages

  • Limited capacity compared to other storage technologies
  • Slower write speeds compared to volatile memory

Working Principles

The 93C86A-E/MS operates by using electrical signals to store and retrieve data within its memory cells. When data needs to be written or read, the chip communicates with the controlling device through the SPI interface.

Detailed Application Field Plans

The 93C86A-E/MS is widely used in applications such as: - Automotive engine control units - Industrial automation systems - Consumer electronics for storing configuration settings

Detailed and Complete Alternative Models

Some alternative models to the 93C86A-E/MS include: - 24C16 from Microchip Technology - AT24C16 from Atmel Corporation - M24C16 from STMicroelectronics

In conclusion, the 93C86A-E/MS is a versatile EEPROM chip suitable for various electronic applications, offering non-volatile data storage with low power consumption and compact form factor.

[Word Count: 398]

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi 93C86A-E/MS dalam penyelesaian teknikal

  1. What is the operating temperature range of 93C86A-E/MS?
    - The operating temperature range of 93C86A-E/MS is -40°C to +85°C.

  2. Can 93C86A-E/MS be used in automotive applications?
    - Yes, 93C86A-E/MS is suitable for automotive applications.

  3. What is the typical supply voltage for 93C86A-E/MS?
    - The typical supply voltage for 93C86A-E/MS is 2.5V to 5.5V.

  4. Does 93C86A-E/MS support SPI communication?
    - Yes, 93C86A-E/MS supports SPI communication.

  5. What is the maximum clock frequency supported by 93C86A-E/MS?
    - The maximum clock frequency supported by 93C86A-E/MS is 10MHz.

  6. Is 93C86A-E/MS compatible with industrial control systems?
    - Yes, 93C86A-E/MS is compatible with industrial control systems.

  7. Can 93C86A-E/MS be used in consumer electronics?
    - Yes, 93C86A-E/MS is suitable for use in consumer electronics.

  8. What is the typical write cycle endurance of 93C86A-E/MS?
    - The typical write cycle endurance of 93C86A-E/MS is 1,000,000 cycles.

  9. Does 93C86A-E/MS have built-in security features?
    - Yes, 93C86A-E/MS includes built-in security features for data protection.

  10. Is 93C86A-E/MS RoHS compliant?
    - Yes, 93C86A-E/MS is RoHS compliant for environmental safety.