Microchip Technology
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
93AA66A-I/P
Lihat Butiran Helaian data

93AA66A-I/P

Product Overview

The 93AA66A-I/P is a serial Electrically Erasable Programmable Read-Only Memory (EEPROM) device. It falls under the category of non-volatile memory and is commonly used for storing small amounts of data in electronic systems. The 93AA66A-I/P offers characteristics such as low power consumption, high reliability, and small package size. It is typically available in a plastic dual in-line package (PDIP) and comes in various packaging quantities.

Specifications

  • Memory Capacity: 4Kbits
  • Interface: Serial I2C
  • Operating Voltage: 1.8V to 5.5V
  • Operating Temperature: -40°C to 85°C
  • Write Time: 5ms (typical)
  • Data Retention: 200 years

Detailed Pin Configuration

The 93AA66A-I/P has 8 pins, including power supply, ground, and serial communication pins. The pinout configuration is as follows: 1. VCC - Power Supply 2. NC - No Connection 3. SDA - Serial Data 4. SCL - Serial Clock 5. A0 - Device Address Input 6. A1 - Device Address Input 7. WP - Write Protect 8. VSS - Ground

Functional Features

The device supports byte write and sequential read operations, making it suitable for applications requiring frequent data updates. Additionally, it features built-in write protection and a unique device address for system integration.

Advantages and Disadvantages

Advantages

  • Low power consumption
  • High reliability
  • Small form factor
  • Built-in write protection

Disadvantages

  • Limited storage capacity
  • Slower write time compared to some alternatives

Working Principles

The 93AA66A-I/P utilizes an I2C interface for communication with the host microcontroller. When writing data, the device stores the information in its non-volatile memory cells using an electrically controlled process. During read operations, the stored data is retrieved and transmitted to the microcontroller via the serial interface.

Detailed Application Field Plans

The 93AA66A-I/P is commonly used in applications such as: - Automotive electronics - Industrial control systems - Consumer electronics - Medical devices - IoT (Internet of Things) devices

Detailed and Complete Alternative Models

Some alternative models to the 93AA66A-I/P include: - 24LC04B-I/P by Microchip Technology - AT24C02C-SSHM-T by Adesto Technologies - CAT24C08WI-GT3 by ON Semiconductor

In conclusion, the 93AA66A-I/P is a versatile EEPROM device suitable for various embedded systems and electronic applications, offering reliable non-volatile memory storage with low power consumption and a compact form factor.

Word Count: 366

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi 93AA66A-I/P dalam penyelesaian teknikal

  1. What is the operating voltage range of 93AA66A-I/P?
    - The operating voltage range of 93AA66A-I/P is 1.8V to 5.5V.

  2. What is the maximum clock frequency supported by 93AA66A-I/P?
    - The maximum clock frequency supported by 93AA66A-I/P is 3MHz.

  3. Can 93AA66A-I/P be used in automotive applications?
    - Yes, 93AA66A-I/P is suitable for automotive applications.

  4. What is the typical write cycle time for 93AA66A-I/P?
    - The typical write cycle time for 93AA66A-I/P is 5ms.

  5. Does 93AA66A-I/P support sequential read operation?
    - Yes, 93AA66A-I/P supports sequential read operation.

  6. What is the temperature range for 93AA66A-I/P?
    - The temperature range for 93AA66A-I/P is -40°C to 85°C.

  7. Can 93AA66A-I/P be used in industrial control systems?
    - Yes, 93AA66A-I/P is suitable for use in industrial control systems.

  8. What is the package type of 93AA66A-I/P?
    - 93AA66A-I/P is available in an 8-pin PDIP package.

  9. Is 93AA66A-I/P RoHS compliant?
    - Yes, 93AA66A-I/P is RoHS compliant.

  10. What is the maximum endurance of 93AA66A-I/P?
    - The maximum endurance of 93AA66A-I/P is 1,000,000 write cycles.