Meixin Integrated
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
MAX6468XS29D3+T
Lihat Butiran Helaian data

MAX6468XS29D3+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Regulator
  • Characteristics: High efficiency, low dropout voltage, small package size
  • Package: SOT23-5
  • Essence: This IC is designed to regulate voltage in electronic circuits.
  • Packaging/Quantity: Available in tape and reel packaging, with 3000 units per reel.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage: 2.9V
  • Output Current: 100mA
  • Dropout Voltage: 120mV at 100mA
  • Quiescent Current: 40µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX6468XS29D3+T IC has a total of five pins:

  1. GND: Ground pin
  2. IN: Input voltage pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. OUT: Output voltage pin

Functional Features

  • Low Dropout Voltage: The MAX6468XS29D3+T exhibits a low dropout voltage, ensuring efficient regulation even when the input voltage is close to the desired output voltage.
  • High Efficiency: This IC offers high efficiency, minimizing power dissipation and maximizing battery life in portable devices.
  • Enable Pin: The EN pin allows for easy on/off control of the regulator, conserving power when not needed.
  • Short-Circuit Protection: The MAX6468XS29D3+T includes built-in short-circuit protection, safeguarding the circuit from damage in case of a fault.

Advantages and Disadvantages

Advantages: - Small package size allows for space-saving designs. - Low dropout voltage ensures efficient regulation. - High efficiency maximizes battery life. - Enable pin provides easy control over the regulator.

Disadvantages: - Limited output current of 100mA may not be suitable for high-power applications. - Operating temperature range is limited to -40°C to +85°C.

Working Principles

The MAX6468XS29D3+T is a linear voltage regulator that operates by comparing the feedback voltage (FB) with a reference voltage. It adjusts the pass transistor's resistance to maintain a constant output voltage, compensating for changes in input voltage and load conditions.

Detailed Application Field Plans

The MAX6468XS29D3+T is commonly used in various electronic devices and applications, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Industrial control systems - Automotive electronics

Detailed and Complete Alternative Models

  1. MAX6469XS29D3+T: Similar to MAX6468XS29D3+T, but with an output voltage of 2.9V.
  2. MAX6468XS28D3+T: Similar to MAX6468XS29D3+T, but with an output voltage of 2.8V.
  3. MAX6468XS30D3+T: Similar to MAX6468XS29D3+T, but with an output voltage of 3.0V.
  4. MAX6467XS29D3+T: Similar to MAX6468XS29D3+T, but with a lower quiescent current of 20µA.

These alternative models provide flexibility in choosing the desired output voltage or optimizing for specific application requirements.

In conclusion, the MAX6468XS29D3+T is a voltage regulator IC with high efficiency, low dropout voltage, and a small package size. It offers reliable voltage regulation for various electronic devices and applications.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi MAX6468XS29D3+T dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of MAX6468XS29D3+T in technical solutions:

  1. Q: What is MAX6468XS29D3+T? A: MAX6468XS29D3+T is a specific model of voltage regulator IC (integrated circuit) manufactured by Maxim Integrated. It is designed to regulate voltage in electronic circuits.

  2. Q: What is the input voltage range for MAX6468XS29D3+T? A: The input voltage range for MAX6468XS29D3+T is typically between 2.5V and 5.5V.

  3. Q: What is the output voltage of MAX6468XS29D3+T? A: The output voltage of MAX6468XS29D3+T is fixed at 2.9V.

  4. Q: What is the maximum output current that MAX6468XS29D3+T can handle? A: MAX6468XS29D3+T can handle a maximum output current of 100mA.

  5. Q: What is the purpose of using MAX6468XS29D3+T in a technical solution? A: MAX6468XS29D3+T is commonly used to provide a stable and regulated power supply to various components in electronic devices or systems.

  6. Q: Can MAX6468XS29D3+T be used in battery-powered applications? A: Yes, MAX6468XS29D3+T can be used in battery-powered applications as it has a wide input voltage range and low quiescent current.

  7. Q: Is MAX6468XS29D3+T suitable for automotive applications? A: Yes, MAX6468XS29D3+T is suitable for automotive applications as it can handle the required voltage regulation and has a wide operating temperature range.

  8. Q: Does MAX6468XS29D3+T have built-in protection features? A: Yes, MAX6468XS29D3+T includes built-in protection features such as thermal shutdown and current limit protection.

  9. Q: Can multiple MAX6468XS29D3+T ICs be used in parallel to increase the output current? A: No, it is not recommended to use multiple MAX6468XS29D3+T ICs in parallel to increase the output current. It is better to choose a different IC with higher output current capability.

  10. Q: Where can I find more information about the application of MAX6468XS29D3+T? A: You can refer to the datasheet provided by Maxim Integrated for detailed information on the application, electrical characteristics, and usage guidelines of MAX6468XS29D3+T.