Linear Technology/QD Devices
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
LTC3886EUKG#PBF
Lihat Butiran Helaian data

LTC3886EUKG#PBF

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management

Characteristics: - High Efficiency - Wide Input Voltage Range - Programmable Output Voltage - Current Monitoring and Limiting - Fault Protection Features

Package: 5mm x 6mm QFN-32

Essence: The LTC3886EUKG#PBF is a high-performance power management IC designed for various applications that require efficient power conversion and control.

Packaging/Quantity: The LTC3886EUKG#PBF is available in a QFN-32 package. It is typically sold in reels of 2500 units.

Specifications

  • Input Voltage Range: 4.5V to 38V
  • Output Voltage Range: 0.5V to 5.5V
  • Maximum Output Current: 30A
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to 125°C

Pin Configuration

The LTC3886EUKG#PBF has a total of 32 pins. Here is the detailed pin configuration:

  1. VIN - Input Voltage
  2. GND - Ground
  3. VOUT - Output Voltage
  4. FB - Feedback Voltage
  5. EN - Enable Pin
  6. SS - Soft-Start Pin
  7. ITH - Current Sense Threshold
  8. MODE - Operation Mode Selection
  9. PG - Power Good Indicator
  10. CLKIN - Clock Input
  11. CLKOUT - Clock Output
  12. SYNC - Synchronization Input
  13. RT - Timing Resistor
  14. COMP - Compensation Node
  15. BST - Bootstrap Capacitor Connection
  16. SW - Switch Node 17-32. NC - No Connect Pins

Functional Features

  • Wide Input Voltage Range allows for versatile applications.
  • Programmable Output Voltage provides flexibility in power supply design.
  • Current Monitoring and Limiting ensures safe operation and protects the system from overcurrent conditions.
  • Fault Protection Features such as overvoltage, undervoltage, and overtemperature protection enhance system reliability.

Advantages

  • High Efficiency results in reduced power dissipation and improved energy efficiency.
  • Wide Input Voltage Range enables compatibility with various power sources.
  • Programmable Output Voltage allows customization to meet specific requirements.
  • Current Monitoring and Limiting enhances system safety and protects components.
  • Fault Protection Features ensure reliable operation and prevent damage to the system.

Disadvantages

  • Limited maximum output current of 30A may not be suitable for high-power applications.
  • Complex pin configuration may require careful layout and routing considerations during PCB design.

Working Principles

The LTC3886EUKG#PBF operates by regulating the input voltage and converting it to a programmable output voltage. It utilizes a combination of control algorithms, feedback mechanisms, and protection features to maintain stable and efficient power delivery. The IC continuously monitors the input and output voltages, adjusts the duty cycle of the internal switching regulator, and limits the output current based on the programmed settings and external feedback signals.

Application Field Plans

The LTC3886EUKG#PBF is widely used in various applications that require efficient power management, including but not limited to: - Data centers - Telecommunications equipment - Industrial automation systems - Automotive electronics - Renewable energy systems

Alternative Models

Here are some alternative models that offer similar functionality to the LTC3886EUKG#PBF: - LT8614S - 42V, 4A Synchronous Step-Down Regulator - LTC3872 - Dual Output PolyPhase Step-Down DC/DC Controller - LT8609 - 42V, 2.5A Synchronous Step-Down Regulator - LTC3890 - 60V Low IQ, Dual Output Synchronous Step-Down DC/DC Controller

These alternative models can be considered based on specific application requirements and design constraints.

Word count: 446 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi LTC3886EUKG#PBF dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of LTC3886EUKG#PBF in technical solutions:

  1. Q: What is LTC3886EUKG#PBF? A: LTC3886EUKG#PBF is a high-performance dual-output synchronous step-down DC/DC controller with digital power system management.

  2. Q: What are the key features of LTC3886EUKG#PBF? A: The key features include wide input voltage range, high efficiency, precision output voltage regulation, programmable loop compensation, and digital power management capabilities.

  3. Q: What applications can LTC3886EUKG#PBF be used for? A: LTC3886EUKG#PBF is suitable for various applications such as telecom and networking equipment, industrial systems, servers, and embedded computing systems.

  4. Q: How does LTC3886EUKG#PBF achieve high efficiency? A: LTC3886EUKG#PBF utilizes advanced synchronous rectification and low RDS(ON) MOSFETs to minimize power losses and maximize efficiency.

  5. Q: Can LTC3886EUKG#PBF support multiple output voltages? A: Yes, LTC3886EUKG#PBF supports two independent outputs, each with its own feedback control loop.

  6. Q: Does LTC3886EUKG#PBF have any protection features? A: Yes, LTC3886EUKG#PBF provides comprehensive protection features including overvoltage protection, undervoltage lockout, overcurrent protection, and thermal shutdown.

  7. Q: How can I program and monitor LTC3886EUKG#PBF? A: LTC3886EUKG#PBF can be programmed and monitored using the LTpowerPlay software, which provides a user-friendly interface for configuration and monitoring.

  8. Q: Can LTC3886EUKG#PBF operate in a wide input voltage range? A: Yes, LTC3886EUKG#PBF can operate from an input voltage range of 4.5V to 38V, making it suitable for various power supply designs.

  9. Q: What is the maximum output current that LTC3886EUKG#PBF can handle? A: LTC3886EUKG#PBF can handle a maximum output current of up to 25A per phase.

  10. Q: Is LTC3886EUKG#PBF RoHS compliant? A: Yes, LTC3886EUKG#PBF is RoHS compliant, ensuring it meets environmental regulations.

Please note that these answers are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with technical experts for detailed information.