Linear Technology/QD Devices
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
LTC3814EFE-5#PBF
Lihat Butiran Helaian data

LTC3814EFE-5#PBF

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management

Characteristics: - High efficiency - Wide input voltage range - Adjustable output voltage - Synchronous rectification - Current mode control

Package: 20-Lead TSSOP

Essence: The LTC3814EFE-5#PBF is a high-performance power management IC designed for various applications.

Packaging/Quantity: Available in tape and reel packaging, with a quantity of 250 units per reel.

Specifications

  • Input Voltage Range: 4.5V to 60V
  • Output Voltage Range: 0.8V to 55V
  • Maximum Switching Frequency: 500kHz
  • Operating Temperature Range: -40°C to 125°C
  • Efficiency: Up to 95%
  • Quiescent Current: 100µA

Pin Configuration

The LTC3814EFE-5#PBF has a 20-lead TSSOP package with the following pin configuration:

  1. VIN: Input voltage
  2. GND: Ground
  3. FB: Feedback voltage
  4. COMP: Compensation node
  5. SS/TR: Soft-start/Tracking
  6. SYNC/MODE: External synchronization/Mode selection
  7. VCC: Supply voltage
  8. PGND: Power ground
  9. SW: Switch node
  10. SW: Switch node
  11. SW: Switch node
  12. SW: Switch node
  13. SW: Switch node
  14. SW: Switch node
  15. SW: Switch node
  16. SW: Switch node
  17. SW: Switch node
  18. SW: Switch node
  19. SW: Switch node
  20. SW: Switch node

Functional Features

  • Wide input voltage range allows for versatile applications.
  • Adjustable output voltage provides flexibility in power management.
  • Synchronous rectification improves efficiency and reduces power loss.
  • Current mode control ensures stable and reliable operation.
  • Soft-start/Tracking feature enables controlled startup and tracking of the output voltage.

Advantages and Disadvantages

Advantages: - High efficiency leads to energy savings. - Wide input voltage range accommodates various power sources. - Adjustable output voltage meets different requirements. - Synchronous rectification reduces power loss. - Current mode control enhances stability.

Disadvantages: - Limited maximum switching frequency compared to some other ICs. - Requires external synchronization for certain applications.

Working Principles

The LTC3814EFE-5#PBF operates based on a current mode control architecture. It regulates the output voltage by adjusting the duty cycle of the internal switches. The synchronous rectification mechanism improves efficiency by minimizing power loss during switching transitions. The soft-start feature gradually ramps up the output voltage during startup, preventing excessive inrush current.

Detailed Application Field Plans

The LTC3814EFE-5#PBF is suitable for a wide range of applications, including but not limited to: 1. Industrial power supplies 2. Automotive electronics 3. Telecommunications equipment 4. Distributed power systems 5. Battery-powered devices 6. LED lighting 7. Motor drives 8. Solar power systems

Detailed and Complete Alternative Models

  1. LTC3814EFE-5#TRMPBF
  2. LTC3814EFE-5#TRPBF
  3. LTC3814EFE-5#TRMPBF-ND
  4. LTC3814EFE-5#TRPBF-ND
  5. LTC3814EFE-5#TR
  6. LTC3814EFE-5#TRM
  7. LTC3814EFE-5#TRM-ND
  8. LTC3814EFE-5#TR-ND

These alternative models offer similar functionality and can be considered as substitutes for the LTC3814EFE-5#PBF.

Word count: 366 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi LTC3814EFE-5#PBF dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of LTC3814EFE-5#PBF in technical solutions:

  1. Q: What is LTC3814EFE-5#PBF? A: LTC3814EFE-5#PBF is a specific model of a synchronous step-down DC/DC controller IC manufactured by Linear Technology (now part of Analog Devices). It is designed for use in various power supply applications.

  2. Q: What is the input voltage range supported by LTC3814EFE-5#PBF? A: The input voltage range supported by LTC3814EFE-5#PBF is typically between 4.5V and 60V.

  3. Q: What is the output voltage range that can be achieved using LTC3814EFE-5#PBF? A: The output voltage range achievable with LTC3814EFE-5#PBF depends on the external components used, but it can generally support output voltages as low as 0.8V.

  4. Q: What is the maximum output current that LTC3814EFE-5#PBF can handle? A: LTC3814EFE-5#PBF can handle a maximum output current of up to 20A, depending on the design and thermal considerations.

  5. Q: Does LTC3814EFE-5#PBF require an external MOSFET for operation? A: Yes, LTC3814EFE-5#PBF requires an external N-channel MOSFET for its operation.

  6. Q: Can LTC3814EFE-5#PBF operate in a synchronous rectification mode? A: Yes, LTC3814EFE-5#PBF supports synchronous rectification, which helps improve efficiency.

  7. Q: What is the switching frequency range of LTC3814EFE-5#PBF? A: The switching frequency range of LTC3814EFE-5#PBF is typically between 100kHz and 1MHz, but it can be adjusted using external components.

  8. Q: Does LTC3814EFE-5#PBF have any built-in protection features? A: Yes, LTC3814EFE-5#PBF includes various built-in protection features such as overcurrent protection, overvoltage protection, and thermal shutdown.

  9. Q: Can LTC3814EFE-5#PBF be used in automotive applications? A: Yes, LTC3814EFE-5#PBF is suitable for automotive applications as it meets the necessary requirements for automotive-grade components.

  10. Q: Are there any evaluation boards or reference designs available for LTC3814EFE-5#PBF? A: Yes, Analog Devices provides evaluation boards and reference designs for LTC3814EFE-5#PBF, which can help users get started with their designs and understand its capabilities better.

Please note that the answers provided here are general and may vary depending on specific design considerations and application requirements. It is always recommended to refer to the datasheet and application notes provided by the manufacturer for detailed information.