Linear Technology/QD Devices
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
LTC1709EG-85#PBF
Lihat Butiran Helaian data

LTC1709EG-85#PBF

Product Overview

Category

The LTC1709EG-85#PBF belongs to the category of integrated circuits (ICs) specifically designed for power management applications.

Use

This IC is commonly used in various electronic devices and systems to regulate and control power supply voltages efficiently.

Characteristics

  • High efficiency: The LTC1709EG-85#PBF is known for its high conversion efficiency, ensuring minimal power loss during voltage regulation.
  • Wide input voltage range: It can handle a wide range of input voltages, making it suitable for diverse applications.
  • Low quiescent current: The IC has a low quiescent current, enabling energy-efficient operation.
  • Overcurrent protection: It incorporates overcurrent protection features to safeguard connected devices from damage.

Package

The LTC1709EG-85#PBF is available in a compact and industry-standard 20-pin SSOP package. This package ensures easy integration into various circuit designs.

Essence

The essence of the LTC1709EG-85#PBF lies in its ability to efficiently regulate and control power supply voltages, providing stable and reliable power to connected devices.

Packaging/Quantity

The LTC1709EG-85#PBF is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Input Voltage Range: 2.7V to 36V
  • Output Voltage Range: 0.8V to 34V
  • Maximum Output Current: 1.5A
  • Switching Frequency: Up to 500kHz
  • Quiescent Current: 80µA
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The LTC1709EG-85#PBF features a 20-pin SSOP package with the following pin configuration:

  1. VIN: Input Voltage
  2. GND: Ground
  3. SW: Switching Node
  4. FB: Feedback Pin
  5. SS/TR: Soft-Start/Tracking Control
  6. VCC: Supply Voltage for Internal Circuitry
  7. SYNC: Synchronization Input
  8. RT/CLK: Oscillator Timing Resistor/Clock Input
  9. CLKOUT: Clock Output
  10. PGOOD: Power Good Indicator
  11. EN: Enable Pin
  12. AGND: Analog Ground
  13. COMP: Compensation Pin
  14. SS/TR: Soft-Start/Tracking Control
  15. VFB: Feedback Voltage
  16. VSENSE: Current Sense Voltage
  17. ITH: Threshold Voltage for Overcurrent Protection
  18. VCC: Supply Voltage for Internal Circuitry
  19. PGND: Power Ground
  20. LX: Inductor Connection

Functional Features

The LTC1709EG-85#PBF offers the following functional features:

  1. Voltage Regulation: It provides precise voltage regulation, ensuring a stable output voltage regardless of input variations.
  2. Current Limiting: The IC incorporates overcurrent protection, limiting the output current to prevent damage to connected devices.
  3. Soft-Start: The soft-start feature allows for gradual ramp-up of the output voltage, reducing inrush current and improving system reliability.
  4. Synchronization: It supports synchronization with an external clock signal, enabling coordination with other components in the system.

Advantages and Disadvantages

Advantages

  • High conversion efficiency reduces power loss.
  • Wide input voltage range enables versatile applications.
  • Compact package facilitates easy integration into circuit designs.
  • Overcurrent protection ensures device safety.

Disadvantages

  • Limited maximum output current (1.5A).
  • Requires additional external components for complete power management solutions.

Working Principles

The LTC1709EG-85#PBF operates based on a switching regulator topology. It utilizes pulse-width modulation (PWM) techniques to regulate the output voltage. The IC continuously monitors the input and output voltages, adjusting the duty cycle of the internal switch to maintain a stable output voltage.

Detailed Application Field Plans

The LTC1709EG-85#PBF finds applications in various fields, including but not limited to:

  1. Industrial Automation: Power supply regulation for control systems, motor drives, and sensors.
  2. Telecommunications: Voltage regulation for telecom infrastructure equipment, such as base stations and routers.
  3. Consumer Electronics: Power management in portable devices, audio/video equipment, and home appliances.
  4. Automotive: Voltage regulation for automotive electronics, including infotainment systems and advanced driver-assistance systems (ADAS).
  5. Renewable Energy: Power conversion and regulation in solar energy systems and wind turbines.

Detailed and Complete Alternative Models

  1. LT1763: Low dropout linear regulator with adjustable output voltage.
  2. LTC3780: High-efficiency synchronous buck-boost DC

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi LTC1709EG-85#PBF dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of LTC1709EG-85#PBF in technical solutions:

  1. Q: What is LTC1709EG-85#PBF? A: LTC1709EG-85#PBF is a specific model of a power management integrated circuit (PMIC) designed by Linear Technology (now part of Analog Devices). It provides multiple voltage outputs and various features for power supply applications.

  2. Q: What are the key features of LTC1709EG-85#PBF? A: Some key features of LTC1709EG-85#PBF include a wide input voltage range, multiple regulated output voltages, high efficiency, adjustable switching frequency, and built-in protection features like overcurrent and thermal shutdown.

  3. Q: What are the typical applications of LTC1709EG-85#PBF? A: LTC1709EG-85#PBF is commonly used in various technical solutions such as industrial automation, telecommunications equipment, embedded systems, automotive electronics, and portable devices where multiple regulated power supplies are required.

  4. Q: How many regulated output voltages does LTC1709EG-85#PBF provide? A: LTC1709EG-85#PBF can provide up to four regulated output voltages, which can be adjusted according to the specific requirements of the application.

  5. Q: What is the maximum input voltage that LTC1709EG-85#PBF can handle? A: The maximum input voltage range of LTC1709EG-85#PBF is typically around 36V, but it is always recommended to refer to the datasheet for the exact specifications.

  6. Q: Can LTC1709EG-85#PBF operate in a wide temperature range? A: Yes, LTC1709EG-85#PBF is designed to operate in a wide temperature range, typically from -40°C to 85°C, making it suitable for various environments.

  7. Q: Does LTC1709EG-85#PBF have any built-in protection features? A: Yes, LTC1709EG-85#PBF incorporates several built-in protection features such as overcurrent protection, thermal shutdown, and undervoltage lockout to ensure safe operation and prevent damage to the circuit.

  8. Q: Can I adjust the switching frequency of LTC1709EG-85#PBF? A: Yes, LTC1709EG-85#PBF allows you to adjust the switching frequency within a certain range, providing flexibility to optimize efficiency and performance based on your specific requirements.

  9. Q: Is LTC1709EG-85#PBF available in different package options? A: Yes, LTC1709EG-85#PBF is available in different package options, including surface-mount packages like the 28-pin SSOP (Shrink Small Outline Package).

  10. Q: Where can I find more detailed information about LTC1709EG-85#PBF? A: You can find more detailed information about LTC1709EG-85#PBF in the datasheet provided by Analog Devices or by visiting their official website.