Linear Technology/QD Devices
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
LT1680CSW#PBF
Lihat Butiran Helaian data

LT1680CSW#PBF

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Regulator
  • Characteristics: High efficiency, low dropout voltage, adjustable output voltage
  • Package: SOIC-16
  • Essence: Regulates input voltage to a stable output voltage
  • Packaging/Quantity: Tape & Reel (2500 units)

Specifications

  • Input Voltage Range: 2.5V to 20V
  • Output Voltage Range: 1.24V to 18V
  • Output Current: 1.5A
  • Dropout Voltage: 300mV at 1.5A
  • Quiescent Current: 1.3mA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  • Pin 1: Feedback
  • Pin 2: Compensation
  • Pin 3: Vout
  • Pin 4: GND
  • Pin 5: Vadj
  • Pin 6: Vin
  • Pin 7-10: NC
  • Pin 11: NC
  • Pin 12: NC
  • Pin 13: NC
  • Pin 14: NC
  • Pin 15: NC
  • Pin 16: NC

Functional Features

  • High Efficiency: Minimizes power loss
  • Low Dropout Voltage: Suitable for low input-output voltage differential applications
  • Adjustable Output Voltage: Offers flexibility in various applications

Advantages and Disadvantages

  • Advantages:
    • High efficiency
    • Wide input voltage range
    • Adjustable output voltage
  • Disadvantages:
    • Higher quiescent current compared to some alternatives

Working Principles

The LT1680CSW#PBF operates by comparing the output voltage with a reference voltage and adjusting the pass element to maintain a stable output voltage.

Detailed Application Field Plans

  • Automotive Electronics: Power supply for sensors and control modules
  • Industrial Equipment: Voltage regulation for motor drives and control systems
  • Telecommunications: Power management in communication devices

Detailed and Complete Alternative Models

  • LM317: Adjustable voltage regulator with similar characteristics
  • LM2940: Low dropout voltage regulator suitable for low power applications
  • LT1086: Adjustable voltage regulator with lower quiescent current

This comprehensive entry provides an in-depth understanding of the LT1680CSW#PBF, covering its specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi LT1680CSW#PBF dalam penyelesaian teknikal

  1. What is the LT1680CSW#PBF?

    • The LT1680CSW#PBF is a high voltage, micropower, push-pull DC/DC controller.

  2. What is the input voltage range for LT1680CSW#PBF?

    • The input voltage range for LT1680CSW#PBF is 2.5V to 14V.

  3. What is the output voltage range for LT1680CSW#PBF?

    • The output voltage range for LT1680CSW#PBF is 1.24V to 14V.

  4. What is the typical application of LT1680CSW#PBF?

    • The LT1680CSW#PBF is commonly used in battery-powered systems, industrial control systems, and automotive applications.

  5. What is the maximum switching frequency of LT1680CSW#PBF?

    • The maximum switching frequency of LT1680CSW#PBF is 300kHz.

  6. What are the key features of LT1680CSW#PBF?

    • The key features of LT1680CSW#PBF include low quiescent current, wide input voltage range, and adjustable output voltage.

  7. What is the operating temperature range for LT1680CSW#PBF?

    • The operating temperature range for LT1680CSW#PBF is -40°C to 85°C.

  8. What are the typical applications where LT1680CSW#PBF is not suitable?

    • LT1680CSW#PBF may not be suitable for applications requiring very high switching frequencies or extremely low power consumption.

  9. What are the recommended external components for LT1680CSW#PBF?

    • The recommended external components for LT1680CSW#PBF include an inductor, diode, and input/output capacitors.

  10. Where can I find the detailed datasheet for LT1680CSW#PBF?

    • The detailed datasheet for LT1680CSW#PBF can be found on the manufacturer's website or through authorized distributors.