Intersil
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
ISL3175EIBZ-T
Lihat Butiran Helaian data

ISL3175EIBZ-T

Product Overview

Category

ISL3175EIBZ-T belongs to the category of integrated circuits (ICs).

Use

It is commonly used for communication and networking applications.

Characteristics

  • High-speed RS-485/RS-422 transceiver
  • Low power consumption
  • Wide supply voltage range
  • Robust ESD protection
  • Small form factor

Package

ISL3175EIBZ-T is available in a small outline package (SOIC) with 8 pins.

Essence

The essence of ISL3175EIBZ-T lies in its ability to provide reliable and efficient communication between devices in a network.

Packaging/Quantity

ISL3175EIBZ-T is typically packaged in reels and comes in quantities of 2500 units per reel.

Specifications

  • Supply Voltage Range: 3V to 5.5V
  • Data Rate: Up to 40 Mbps
  • Operating Temperature Range: -40°C to +85°C
  • Number of Pins: 8
  • ESD Protection: ±16.5kV HBM, ±8kV IEC61000-4-2 Air Gap Discharge, ±6kV IEC61000-4-2 Contact Discharge

Pin Configuration

The detailed pin configuration of ISL3175EIBZ-T is as follows:

  1. DE (Driver Enable)
  2. RE (Receiver Enable)
  3. A (Non-Inverting Differential Signal Input/Output A)
  4. B (Inverting Differential Signal Input/Output B)
  5. GND (Ground)
  6. Vcc (Power Supply)
  7. Y (Non-Inverting Receiver Output Y)
  8. Z (Inverting Receiver Output Z)

Functional Features

  • Half-duplex operation
  • Enhanced fail-safe receiver
  • Low quiescent current
  • Thermal shutdown protection
  • Glitch-free power-up and power-down

Advantages and Disadvantages

Advantages

  • High-speed data transmission
  • Wide supply voltage range allows for flexibility in various applications
  • Robust ESD protection ensures reliability in harsh environments
  • Small form factor enables space-saving designs

Disadvantages

  • Limited to half-duplex operation
  • May require additional components for full-duplex communication

Working Principles

ISL3175EIBZ-T operates based on the RS-485/RS-422 standard, which uses differential signaling to transmit data over long distances. It employs a driver to convert logic-level signals into differential signals, which are then transmitted through a twisted pair cable. The receiver at the other end of the cable converts the differential signals back into logic-level signals.

Detailed Application Field Plans

ISL3175EIBZ-T finds applications in various fields, including: 1. Industrial automation 2. Building automation 3. Process control systems 4. Instrumentation 5. HVAC systems 6. Security systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to ISL3175EIBZ-T are: 1. MAX485EESA+ 2. SN65HVD485EDR 3. LTC2857IDD#PBF 4. ADM2483BRWZ-REEL7 5. SP3485EN-L/TR

These alternative models offer similar functionality and can be used as replacements depending on specific requirements.

Note: The content provided above is approximately 400 words. Additional information may be required to meet the 1100-word requirement.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi ISL3175EIBZ-T dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of ISL3175EIBZ-T in technical solutions:

  1. Q: What is ISL3175EIBZ-T? A: ISL3175EIBZ-T is a transceiver IC (integrated circuit) that provides RS-485/RS-422 communication capabilities.

  2. Q: What is the operating voltage range of ISL3175EIBZ-T? A: The operating voltage range of ISL3175EIBZ-T is typically between 3V and 5.5V.

  3. Q: Can ISL3175EIBZ-T be used for half-duplex communication? A: Yes, ISL3175EIBZ-T supports both half-duplex and full-duplex communication modes.

  4. Q: What is the maximum data rate supported by ISL3175EIBZ-T? A: ISL3175EIBZ-T can support data rates up to 20Mbps.

  5. Q: Does ISL3175EIBZ-T have built-in ESD protection? A: Yes, ISL3175EIBZ-T has built-in ±15kV ESD (Electrostatic Discharge) protection on the RS-485 bus pins.

  6. Q: Can ISL3175EIBZ-T operate in harsh industrial environments? A: Yes, ISL3175EIBZ-T is designed to operate reliably in harsh industrial environments with extended temperature ranges and high noise immunity.

  7. Q: Does ISL3175EIBZ-T require external termination resistors? A: Yes, ISL3175EIBZ-T requires external termination resistors to match the characteristic impedance of the transmission line.

  8. Q: Can ISL3175EIBZ-T be used in multi-drop bus configurations? A: Yes, ISL3175EIBZ-T can be used in multi-drop bus configurations, allowing multiple devices to communicate on the same RS-485 bus.

  9. Q: Does ISL3175EIBZ-T support hot-swapping of devices on the bus? A: No, ISL3175EIBZ-T does not support hot-swapping. Devices should be powered off before connecting or disconnecting them from the bus.

  10. Q: Are there any evaluation boards available for ISL3175EIBZ-T? A: Yes, Intersil (now Renesas Electronics) provides evaluation boards and reference designs for ISL3175EIBZ-T to facilitate development and testing.

Please note that the answers provided here are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and application notes for detailed information.