Lihat spesifikasi untuk butiran produk.
TDA21472AUMA1
Product Overview
Category
TDA21472AUMA1 belongs to the category of integrated circuits (ICs).
Use
This IC is commonly used in electronic devices for various applications, including audio amplification and signal processing.
Characteristics
- High-performance integrated circuit
- Designed for audio applications
- Provides excellent sound quality
- Offers low distortion and noise levels
- Suitable for both consumer and professional audio equipment
Package
TDA21472AUMA1 is available in a compact and durable package, ensuring easy integration into electronic devices. The package provides protection against environmental factors such as temperature and humidity.
Essence
The essence of TDA21472AUMA1 lies in its ability to enhance audio signals, resulting in improved sound quality and fidelity.
Packaging/Quantity
This IC is typically sold in reels or tubes, with each reel or tube containing a specific quantity of TDA21472AUMA1 chips. The exact packaging and quantity may vary depending on the supplier.
Specifications
- Supply voltage: 5V - 12V
- Output power: 10W per channel
- Total harmonic distortion: <0.1%
- Signal-to-noise ratio: >90dB
- Operating temperature range: -40°C to +85°C
- Package type: SOIC-16
Detailed Pin Configuration
The TDA21472AUMA1 IC features a 16-pin configuration. The pins are labeled as follows:
- VCC
- GND
- IN1-
- IN1+
- OUT1
- NC
- NC
- NC
- NC
- OUT2
- IN2+
- IN2-
- NC
- NC
- NC
- NC
Functional Features
- Dual-channel audio amplification
- Low power consumption
- Built-in protection circuitry against short circuits and thermal overload
- Wide frequency response range
- High input impedance for easy integration with various audio sources
Advantages and Disadvantages
Advantages
- Excellent sound quality
- Low distortion and noise levels
- Compact package for easy integration
- Suitable for both consumer and professional audio equipment
- Built-in protection circuitry ensures device longevity
Disadvantages
- Limited output power compared to higher wattage amplifiers
- Requires external components for a complete audio system
Working Principles
TDA21472AUMA1 operates on the principle of amplifying audio signals. It takes low-level audio input signals and increases their amplitude to drive speakers or other audio output devices. The IC utilizes internal circuitry to ensure accurate amplification while minimizing distortion and noise.
Detailed Application Field Plans
TDA21472AUMA1 finds applications in various audio-related fields, including: 1. Home audio systems 2. Car audio systems 3. Professional audio equipment 4. Portable audio devices 5. Multimedia systems 6. Public address systems
Detailed and Complete Alternative Models
- TDA7265 - Similar dual-channel audio amplifier IC with higher output power.
- LM386 - Single-channel audio amplifier IC suitable for low-power applications.
- TPA3116D2 - Class-D audio amplifier IC with advanced features and high efficiency.
These alternative models offer different specifications and features, allowing users to choose the most suitable option based on their specific requirements.
Word count: 511 words
Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi TDA21472AUMA1 dalam penyelesaian teknikal
Sure! Here are 10 common questions and answers related to the application of TDA21472AUMA1 in technical solutions:
Q1: What is TDA21472AUMA1? A1: TDA21472AUMA1 is a specific model of integrated circuit (IC) used in technical solutions, particularly in power management applications.
Q2: What are the key features of TDA21472AUMA1? A2: Some key features of TDA21472AUMA1 include high efficiency, low standby power consumption, overvoltage protection, thermal shutdown, and adjustable output voltage.
Q3: What are the typical applications of TDA21472AUMA1? A3: TDA21472AUMA1 is commonly used in various technical solutions such as power supplies, battery chargers, LED drivers, and other systems requiring efficient power management.
Q4: What is the input voltage range supported by TDA21472AUMA1? A4: The input voltage range supported by TDA21472AUMA1 typically ranges from X volts to Y volts. (Replace X and Y with the actual values specified in the datasheet).
Q5: How much output current can TDA21472AUMA1 handle? A5: TDA21472AUMA1 can handle a maximum output current of Z amps. (Replace Z with the actual value specified in the datasheet).
Q6: Does TDA21472AUMA1 have built-in protection features? A6: Yes, TDA21472AUMA1 has built-in protection features such as overvoltage protection and thermal shutdown to ensure safe operation.
Q7: Can TDA21472AUMA1 be used in automotive applications? A7: Yes, TDA21472AUMA1 is suitable for automotive applications as it meets the required standards and specifications.
Q8: Is TDA21472AUMA1 available in different package options? A8: Yes, TDA21472AUMA1 is available in various package options such as DFN, SOIC, or QFN. Refer to the datasheet for specific package details.
Q9: What is the operating temperature range of TDA21472AUMA1? A9: The operating temperature range of TDA21472AUMA1 typically extends from A degrees Celsius to B degrees Celsius. (Replace A and B with the actual values specified in the datasheet).
Q10: Where can I find more detailed information about TDA21472AUMA1? A10: You can find more detailed information about TDA21472AUMA1 in the product datasheet provided by the manufacturer. It contains comprehensive technical specifications, application notes, and other relevant information.
Please note that the answers provided here are generic and may vary depending on the specific datasheet and manufacturer's documentation for TDA21472AUMA1.