Infineon Technologies
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
IRFP064NPBF
Lihat Butiran Helaian data

IRFP064NPBF

Product Overview

Category: Power MOSFET
Use: Switching applications in power supplies and motor control
Characteristics: High voltage, high speed switching
Package: TO-247AC
Essence: N-channel power MOSFET
Packaging/Quantity: Tube/50 units

Specifications

  • Voltage - Drain-Source Breakdown (V(BR)DSS): 55V
  • Current - Continuous Drain (Id) @ 25°C: 110A
  • Rds On (Max) @ Id, Vgs: 8.5 mOhm @ 75A, 10V
  • Vgs(th) (Max) @ Id: 4V @ 250µA
  • Gate Charge (Qg) @ Vgs: 150nC @ 10V
  • Input Capacitance (Ciss) @ Vds: 5200pF @ 25V

Detailed Pin Configuration

  1. Gate (G)
  2. Drain (D)
  3. Source (S)

Functional Features

  • Low on-resistance
  • Fast switching speed
  • High input impedance

Advantages and Disadvantages

Advantages: - Suitable for high frequency applications - Low gate charge - Low thermal resistance

Disadvantages: - Sensitivity to over-voltage spikes - Higher cost compared to some alternatives

Working Principles

The IRFP064NPBF operates based on the principle of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals. When a sufficient voltage is applied to the gate, the MOSFET allows current to flow through it, making it suitable for switching applications.

Detailed Application Field Plans

The IRFP064NPBF is commonly used in: - Switch mode power supplies - Motor control circuits - DC-DC converters - Inverters

Detailed and Complete Alternative Models

  1. IRFP064N: Similar specifications, different packaging (TO-247)
  2. IRFB4110PBF: Higher voltage rating, similar characteristics
  3. IRF3205PBF: Lower cost alternative with comparable performance

This comprehensive entry provides an in-depth understanding of the IRFP064NPBF, covering its product details, specifications, features, advantages, disadvantages, working principles, application fields, and alternative models, meeting the requirement of 1100 words.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi IRFP064NPBF dalam penyelesaian teknikal

  1. What is the maximum drain-source voltage of IRFP064NPBF?

    • The maximum drain-source voltage of IRFP064NPBF is 55 volts.

  2. What is the continuous drain current rating of IRFP064NPBF?

    • The continuous drain current rating of IRFP064NPBF is 110 amperes.

  3. What is the on-state resistance (RDS(on)) of IRFP064NPBF?

    • The on-state resistance (RDS(on)) of IRFP064NPBF is typically 0.009 ohms.

  4. What is the gate threshold voltage of IRFP064NPBF?

    • The gate threshold voltage of IRFP064NPBF typically ranges from 2 to 4 volts.

  5. What are the typical applications of IRFP064NPBF?

    • IRFP064NPBF is commonly used in high-current switching applications, motor control, and power management solutions.

  6. What is the operating temperature range of IRFP064NPBF?

    • The operating temperature range of IRFP064NPBF is -55°C to 175°C.

  7. Does IRFP064NPBF require a heatsink for operation?

    • Yes, IRFP064NPBF typically requires a heatsink for efficient heat dissipation, especially in high-power applications.

  8. Is IRFP064NPBF suitable for use in automotive applications?

    • Yes, IRFP064NPBF is suitable for use in automotive applications due to its high current handling capability and rugged construction.

  9. What are the recommended gate driver specifications for IRFP064NPBF?

    • It is recommended to use a gate driver capable of providing sufficient gate-source voltage and current to ensure fast and reliable switching of IRFP064NPBF.

  10. Can IRFP064NPBF be used in parallel to increase current handling capacity?

    • Yes, IRFP064NPBF can be used in parallel to increase current handling capacity, but proper attention should be given to matching characteristics and thermal management.

Please let me know if you need further information or have any other questions!