Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
IRFH8318TRPBF

IRFH8318TRPBF

Product Overview

Category: Power MOSFET
Use: Switching applications in power supplies and motor control
Characteristics: High efficiency, low on-resistance, fast switching speed
Package: PQFN 5x6
Essence: Power MOSFET for high-performance applications
Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Drain-Source Voltage (Vdss): 30V
  • Continuous Drain Current (Id): 100A
  • Rds(on) (Max) @ Vgs = 10V: 1.8mΩ
  • Qg (Typ): 22nC
  • Gate-Source Voltage (Vgs): ±20V

Detailed Pin Configuration

The IRFH8318TRPBF follows the standard pin configuration for a PQFN 5x6 package: 1. Gate 2. Drain 3. Source 4. N/C 5. Source 6. Drain 7. Source 8. Gate

Functional Features

  • High efficiency due to low on-resistance
  • Fast switching speed for improved performance
  • Low gate charge for reduced power loss

Advantages and Disadvantages

Advantages: - High efficiency - Fast switching speed - Low on-resistance

Disadvantages: - Sensitive to static electricity - Higher cost compared to standard MOSFETs

Working Principles

The IRFH8318TRPBF operates based on the principles of field-effect transistors, utilizing the voltage applied to the gate terminal to control the flow of current between the drain and source terminals.

Detailed Application Field Plans

This power MOSFET is suitable for a wide range of applications including: - Power supplies - Motor control systems - DC-DC converters - Inverters

Detailed and Complete Alternative Models

  1. IRFH8307TRPBF: Similar specifications with a lower continuous drain current rating
  2. IRFH8400TRPBF: Higher voltage rating and lower on-resistance
  3. IRFH5207TRPBF: Lower voltage rating and smaller package size

Note: The alternative models listed above are for reference purposes and may require additional evaluation based on specific application requirements.


This entry provides a comprehensive overview of the IRFH8318TRPBF, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi IRFH8318TRPBF dalam penyelesaian teknikal

Sure, here are 10 common questions and answers related to the application of IRFH8318TRPBF in technical solutions:

  1. What is the IRFH8318TRPBF?

    • The IRFH8318TRPBF is a power MOSFET designed for high efficiency synchronous buck converters.
  2. What is the maximum drain-source voltage rating of the IRFH8318TRPBF?

    • The maximum drain-source voltage rating is 30V.
  3. What is the typical on-resistance of the IRFH8318TRPBF?

    • The typical on-resistance is 4.5mΩ at Vgs=10V.
  4. What is the maximum continuous drain current of the IRFH8318TRPBF?

    • The maximum continuous drain current is 100A.
  5. What are the typical applications for the IRFH8318TRPBF?

    • Typical applications include high frequency DC-DC converters, synchronous rectification, and POL modules.
  6. What is the recommended operating temperature range for the IRFH8318TRPBF?

    • The recommended operating temperature range is -55°C to 150°C.
  7. Does the IRFH8318TRPBF require a heat sink for operation?

    • It depends on the specific application and power dissipation requirements. In some cases, a heat sink may be necessary.
  8. Is the IRFH8318TRPBF suitable for automotive applications?

    • Yes, the IRFH8318TRPBF is AEC-Q101 qualified and suitable for automotive applications.
  9. What is the gate charge of the IRFH8318TRPBF?

    • The gate charge is typically 20nC.
  10. Can the IRFH8318TRPBF be used in parallel to increase current handling capability?

    • Yes, the IRFH8318TRPBF can be used in parallel to increase current handling capability, but proper layout and thermal considerations should be taken into account.

I hope these answers provide the information you were looking for! If you have any more questions, feel free to ask.