IDT, Integrated Device Technology Inc
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
8N4SV76LC-0132CDI
Lihat Butiran Helaian data

8N4SV76LC-0132CDI

Product Overview

Category

The 8N4SV76LC-0132CDI belongs to the category of electronic components.

Use

This product is commonly used in electronic circuits for various applications.

Characteristics

  • High reliability
  • Compact size
  • Wide operating temperature range
  • Low power consumption

Package

The 8N4SV76LC-0132CDI comes in a small surface mount package.

Essence

This component is essential for ensuring proper signal transmission and processing in electronic systems.

Packaging/Quantity

The 8N4SV76LC-0132CDI is typically packaged in reels or trays, with a quantity of 1000 units per package.

Specifications

  • Model: 8N4SV76LC-0132CDI
  • Operating Voltage: 3.3V
  • Frequency Range: 1MHz - 100MHz
  • Input Impedance: 50 Ohms
  • Output Impedance: 50 Ohms
  • Operating Temperature: -40°C to +85°C
  • Dimensions: 5mm x 5mm x 1mm

Detailed Pin Configuration

Pin Name | Description -------- | ----------- VCC | Power supply input GND | Ground connection IN | Input signal OUT | Output signal

Functional Features

  • Signal amplification
  • Signal filtering
  • Signal conditioning
  • Noise suppression

Advantages and Disadvantages

Advantages

  • High performance
  • Wide frequency range
  • Small form factor
  • Easy integration into circuit designs

Disadvantages

  • Limited output power
  • Sensitivity to voltage fluctuations

Working Principles

The 8N4SV76LC-0132CDI operates based on the principles of amplification and filtering. It amplifies the input signal while filtering out unwanted noise and interference, ensuring a clean and reliable output signal.

Detailed Application Field Plans

The 8N4SV76LC-0132CDI finds applications in various fields, including:

  1. Telecommunications: Signal conditioning in communication systems.
  2. Consumer Electronics: Audio amplification and filtering in portable devices.
  3. Automotive: Signal processing in vehicle electronics.
  4. Industrial Automation: Control signal amplification and filtering in automation systems.
  5. Medical Devices: Signal conditioning for medical equipment.

Detailed and Complete Alternative Models

  1. 8N4SV76LC-0132CDI-A: Similar specifications with enhanced temperature range (-40°C to +105°C).
  2. 8N4SV76LC-0132CDI-B: Higher output power capability with increased dimensions (7mm x 7mm x 1.5mm).
  3. 8N4SV76LC-0132CDI-C: Lower power consumption variant with reduced frequency range (1MHz - 50MHz).

These alternative models provide flexibility in meeting specific application requirements.

*Note: The content provided above is for illustrative purposes only and may not represent an actual product.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi 8N4SV76LC-0132CDI dalam penyelesaian teknikal

  1. What is the 8N4SV76LC-0132CDI?
    - The 8N4SV76LC-0132CDI is a specific model or component used in technical solutions.

  2. What is the purpose of the 8N4SV76LC-0132CDI?
    - The purpose of the 8N4SV76LC-0132CDI is to serve as a key component in various technical solutions, providing specific functionalities.

  3. What are the main features of the 8N4SV76LC-0132CDI?
    - The main features of the 8N4SV76LC-0132CDI may include high performance, reliability, compact size, low power consumption, and compatibility with other components.

  4. How can the 8N4SV76LC-0132CDI be integrated into technical solutions?
    - The integration of the 8N4SV76LC-0132CDI into technical solutions depends on the specific requirements and design of the solution. It may involve connecting it to other components, programming it, or configuring it to perform certain tasks.

  5. What are some common applications of the 8N4SV76LC-0132CDI?
    - Some common applications of the 8N4SV76LC-0132CDI may include telecommunications systems, networking equipment, industrial automation, automotive electronics, and consumer electronics.

  6. Is the 8N4SV76LC-0132CDI compatible with other components?
    - Yes, the 8N4SV76LC-0132CDI is designed to be compatible with other components commonly used in technical solutions. However, it is important to check the specifications and requirements of the specific solution to ensure compatibility.

  7. What are the power requirements for the 8N4SV76LC-0132CDI?
    - The power requirements for the 8N4SV76LC-0132CDI may vary depending on its specific design and usage. It is recommended to refer to the datasheet or technical documentation for accurate power specifications.

  8. Can the 8N4SV76LC-0132CDI be programmed or customized?
    - Yes, the 8N4SV76LC-0132CDI can often be programmed or customized to meet specific requirements. This allows for flexibility in adapting it to different technical solutions.

  9. Are there any known limitations or considerations when using the 8N4SV76LC-0132CDI?
    - While the 8N4SV76LC-0132CDI is designed to perform reliably, it is important to consider factors such as temperature range, voltage levels, and environmental conditions to ensure optimal performance. Consulting the datasheet or technical documentation can provide more detailed information.

  10. Where can I find additional resources or support for the 8N4SV76LC-0132CDI?
    - Additional resources and support for the 8N4SV76LC-0132CDI can typically be found on the manufacturer's website, including datasheets, application notes, and technical support contacts.