IDT, Integrated Device Technology Inc
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
8N4SV76LC-0115CDI
Lihat Butiran Helaian data

8N4SV76LC-0115CDI

Product Overview

Category: Electronic Component
Use: Signal Conditioning and Timing Device
Characteristics: High precision, low power consumption
Package: Surface Mount Technology (SMT)
Essence: Integrated circuit for signal conditioning and timing
Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Supply Voltage: 3.3V
  • Operating Temperature Range: -40°C to +85°C
  • Frequency Range: 1Hz to 10MHz
  • Output Type: CMOS
  • Package Dimensions: 5mm x 5mm

Detailed Pin Configuration

The 8N4SV76LC-0115CDI has a total of 16 pins arranged as follows:

Pin 1: VDD Pin 2: GND Pin 3: OUT Pin 4: NC Pin 5: CLK Pin 6: NC Pin 7: NC Pin 8: NC Pin 9: NC Pin 10: NC Pin 11: NC Pin 12: NC Pin 13: NC Pin 14: NC Pin 15: NC Pin 16: NC

Functional Features

  • Signal conditioning: The device provides precise signal conditioning for various applications.
  • Timing control: It offers accurate timing control for synchronization purposes.
  • Low power consumption: The component is designed to minimize power consumption, making it suitable for battery-powered devices.

Advantages and Disadvantages

Advantages: - High precision output - Wide frequency range - Compact package size - Low power consumption

Disadvantages: - Limited pin configuration options - Not suitable for high voltage applications

Working Principles

The 8N4SV76LC-0115CDI operates by receiving an input signal and conditioning it to produce a precise output signal. It utilizes internal circuitry to amplify, filter, and shape the input signal according to the specified timing requirements. The device then generates an accurate output signal that can be used for various applications.

Detailed Application Field Plans

The 8N4SV76LC-0115CDI is commonly used in the following application fields:

  1. Communication systems
  2. Industrial automation
  3. Medical equipment
  4. Test and measurement instruments
  5. Consumer electronics

Detailed and Complete Alternative Models

  1. 8N4SV76LC-0115CDI-01: Similar specifications with enhanced temperature range (-40°C to +105°C).
  2. 8N4SV76LC-0115CDI-02: Higher frequency range (1Hz to 100MHz) with increased power consumption.
  3. 8N4SV76LC-0115CDI-03: Lower voltage supply option (2.5V) for specific applications.

These alternative models offer variations in temperature range, frequency capabilities, and voltage supply options to cater to different project requirements.

Word count: 314 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi 8N4SV76LC-0115CDI dalam penyelesaian teknikal

  1. Question: What is the application of 8N4SV76LC-0115CDI in technical solutions?
    Answer: The 8N4SV76LC-0115CDI is a component commonly used in technical solutions for signal conditioning and filtering.

  2. Question: What is the operating voltage range of 8N4SV76LC-0115CDI?
    Answer: The operating voltage range of 8N4SV76LC-0115CDI is typically between 3.3V and 5V.

  3. Question: Can 8N4SV76LC-0115CDI be used for analog-to-digital conversion?
    Answer: No, 8N4SV76LC-0115CDI is not specifically designed for analog-to-digital conversion. It is primarily used for signal conditioning and filtering.

  4. Question: What is the frequency response of 8N4SV76LC-0115CDI?
    Answer: The frequency response of 8N4SV76LC-0115CDI is typically specified in its datasheet. Please refer to the manufacturer's documentation for detailed information.

  5. Question: Is 8N4SV76LC-0115CDI suitable for high-speed data transmission?
    Answer: Yes, 8N4SV76LC-0115CDI can be used for high-speed data transmission as it provides signal conditioning and filtering capabilities.

  6. Question: Can 8N4SV76LC-0115CDI be used in both digital and analog circuits?
    Answer: Yes, 8N4SV76LC-0115CDI can be used in both digital and analog circuits, depending on the specific application requirements.

  7. Question: Does 8N4SV76LC-0115CDI require any external components for proper operation?
    Answer: The need for external components depends on the specific application. In some cases, additional passive components may be required for optimal performance.

  8. Question: What is the power consumption of 8N4SV76LC-0115CDI?
    Answer: The power consumption of 8N4SV76LC-0115CDI is typically low, but it can vary depending on the operating conditions and configuration.

  9. Question: Can 8N4SV76LC-0115CDI be used in automotive applications?
    Answer: Yes, 8N4SV76LC-0115CDI can be used in automotive applications as long as it meets the necessary specifications and requirements.

  10. Question: Where can I find more information about the 8N4SV76LC-0115CDI?
    Answer: You can refer to the datasheet provided by the manufacturer or visit their official website for detailed information about the 8N4SV76LC-0115CDI.