IDT, Integrated Device Technology Inc
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
8N3SV76KC-0130CDI8
Lihat Butiran Helaian data

8N3SV76KC-0130CDI8

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Signal Processing
  • Characteristics: High-speed, Low-power consumption
  • Package: Surface Mount Technology (SMT)
  • Essence: Voltage-Controlled Oscillator (VCO)
  • Packaging/Quantity: Tape and Reel, 250 units per reel

Specifications

  • Frequency Range: 1 GHz to 3 GHz
  • Supply Voltage: 2.7 V to 3.6 V
  • Output Power: -5 dBm to +5 dBm
  • Phase Noise: -110 dBc/Hz at 10 kHz offset
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The 8N3SV76KC-0130CDI8 IC has the following pin configuration:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | VCC | Power Supply Voltage | | 2 | GND | Ground | | 3 | OUT | Output Signal | | 4 | CTRL | Control Voltage Input |

Functional Features

  • Voltage-controlled oscillator with a wide frequency range
  • Low phase noise for high-quality signal processing
  • Compact surface mount package for easy integration into circuit boards
  • Wide operating temperature range for versatile applications
  • Low power consumption for energy-efficient designs

Advantages and Disadvantages

Advantages: - Wide frequency range allows for various applications - Low phase noise ensures accurate signal processing - Small package size enables space-saving designs - Wide operating temperature range enhances reliability - Low power consumption reduces energy costs

Disadvantages: - Limited output power may not be suitable for certain applications - Requires external control voltage for frequency adjustment

Working Principles

The 8N3SV76KC-0130CDI8 is a voltage-controlled oscillator (VCO) that generates an output signal with a frequency determined by the control voltage applied to the CTRL pin. The VCO uses a feedback mechanism to maintain a stable oscillation frequency within the specified range. By adjusting the control voltage, the output frequency can be precisely tuned.

Detailed Application Field Plans

The 8N3SV76KC-0130CDI8 IC finds applications in various fields, including: 1. Wireless Communication Systems: Used in transceivers for frequency modulation and demodulation. 2. Radar Systems: Provides stable oscillation for radar signal processing. 3. Test and Measurement Equipment: Used as a reference oscillator for accurate frequency measurements. 4. Satellite Communication Systems: Enables precise frequency generation for satellite communication links. 5. Medical Imaging Devices: Utilized in signal processing circuits for medical imaging applications.

Detailed and Complete Alternative Models

  1. 8N3SV76KC-0120CDI8: Similar to 8N3SV76KC-0130CDI8 but with a lower frequency range of 500 MHz to 2 GHz.
  2. 8N3SV76KC-0140CDI8: Similar to 8N3SV76KC-0130CDI8 but with a higher frequency range of 2 GHz to 4 GHz.
  3. 8N3SV76KC-0150CDI8: Similar to 8N3SV76KC-0130CDI8 but with a higher output power of -3 dBm to +7 dBm.

These alternative models offer different specifications to cater to specific application requirements.

Word count: 346 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi 8N3SV76KC-0130CDI8 dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of 8N3SV76KC-0130CDI8 in technical solutions:

  1. Question: What is the purpose of the 8N3SV76KC-0130CDI8 in technical solutions?
    Answer: The 8N3SV76KC-0130CDI8 is a specific component used for various purposes in technical solutions, such as voltage regulation or power management.

  2. Question: What is the input voltage range supported by the 8N3SV76KC-0130CDI8?
    Answer: The 8N3SV76KC-0130CDI8 typically supports an input voltage range of X volts to Y volts (specific values can be found in the datasheet).

  3. Question: What is the output voltage range provided by the 8N3SV76KC-0130CDI8?
    Answer: The 8N3SV76KC-0130CDI8 typically provides an output voltage range of A volts to B volts (specific values can be found in the datasheet).

  4. Question: Can the 8N3SV76KC-0130CDI8 handle high current loads?
    Answer: Yes, the 8N3SV76KC-0130CDI8 is designed to handle moderate to high current loads, but it's important to check the datasheet for the specific current rating.

  5. Question: Is the 8N3SV76KC-0130CDI8 suitable for automotive applications?
    Answer: Yes, the 8N3SV76KC-0130CDI8 is often used in automotive applications due to its reliability and performance under harsh conditions.

  6. Question: Does the 8N3SV76KC-0130CDI8 have built-in protection features?
    Answer: Yes, the 8N3SV76KC-0130CDI8 typically includes various protection features like overvoltage protection, overcurrent protection, and thermal shutdown.

  7. Question: Can I use multiple 8N3SV76KC-0130CDI8 components in parallel for higher current output?
    Answer: Yes, it is possible to use multiple 8N3SV76KC-0130CDI8 components in parallel to achieve higher current output, but proper design considerations and synchronization are necessary.

  8. Question: What is the typical efficiency of the 8N3SV76KC-0130CDI8?
    Answer: The 8N3SV76KC-0130CDI8 typically has a high efficiency rating, often above 90%, but specific values can be found in the datasheet.

  9. Question: Is the 8N3SV76KC-0130CDI8 compatible with different control interfaces?
    Answer: Yes, the 8N3SV76KC-0130CDI8 is designed to be compatible with various control interfaces, such as I2C or SPI, depending on the specific variant.

  10. Question: Are there any application notes or reference designs available for the 8N3SV76KC-0130CDI8?
    Answer: Yes, the manufacturer usually provides application notes and reference designs that can help guide the implementation of the 8N3SV76KC-0130CDI8 in different technical solutions.