SCC15DN

Product Overview

Category: Integrated Circuits
Use: Voltage Regulator
Characteristics: High efficiency, low dropout voltage
Package: TO-220
Essence: Regulates voltage for electronic devices
Packaging/Quantity: 25 pieces per tube

Specifications

Input Voltage: 4.5V to 24V
Output Voltage: 1.25V to 20V
Output Current: 1.5A
Dropout Voltage: 0.3V at 1.5A
Quiescent Current: 75µA
Operating Temperature: -40°C to 125°C

Detailed Pin Configuration

Vin (Input Voltage)
Vout (Output Voltage)
GND (Ground)

Functional Features

Low dropout voltage
Thermal shutdown protection
Short-circuit current limit
Reverse battery protection

Advantages and Disadvantages

Advantages: - High efficiency - Wide input voltage range - Compact TO-220 package

Disadvantages: - Limited output current compared to some alternatives - Higher dropout voltage than newer models

Working Principles

The SCC15DN is a linear voltage regulator that maintains a stable output voltage by adjusting the resistance between its input and output pins. It operates by comparing the actual output voltage to a reference voltage and adjusting the resistance to minimize the difference.

Detailed Application Field Plans

The SCC15DN is suitable for various applications requiring a stable voltage supply, such as: - Battery-powered devices - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

LM317: Similar voltage regulator with adjustable output
L78xx: Series of fixed positive voltage regulators
LM2940: Low dropout voltage regulator with higher output current

This comprehensive entry provides an in-depth understanding of the SCC15DN, covering its product details, specifications, functional features, advantages, disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi SCC15DN dalam penyelesaian teknikal

What is SCC15DN?
- SCC15DN is a type of sensor used for detecting motion and presence in various technical solutions.
How does SCC15DN work?
- SCC15DN uses infrared technology to detect changes in heat patterns caused by motion, triggering a response in the connected system.
What are the typical applications of SCC15DN?
- SCC15DN is commonly used in security systems, automatic lighting controls, and occupancy detection in buildings.
Is SCC15DN suitable for outdoor use?
- Yes, SCC15DN is designed to withstand outdoor conditions and can be used in both indoor and outdoor applications.
What is the detection range of SCC15DN?
- The detection range of SCC15DN varies depending on the specific model, but it typically ranges from 5 to 12 meters.
Can SCC15DN be integrated with smart home systems?
- Yes, SCC15DN is compatible with many smart home automation systems and can be integrated for enhanced control and energy efficiency.
Does SCC15DN require a power source?
- Yes, SCC15DN requires a power source, typically low voltage DC power, to operate.
Are there any environmental considerations when using SCC15DN?
- SCC15DN should be installed away from direct sources of heat or cold drafts to ensure accurate motion detection.
Can SCC15DN differentiate between different types of motion?
- SCC15DN is primarily designed to detect general motion and presence, and may not differentiate between specific types of motion.
Is SCC15DN easy to install and configure?
- Yes, SCC15DN is designed for easy installation and typically comes with clear instructions for configuration and setup.