Diodes Incorporated
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
PT7M7811TTAEX
Lihat Butiran Helaian data

PT7M7811TTAEX

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: TQFP (Thin Quad Flat Package)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.5V to 5.5V
  • Output Voltage Range: 0.8V to 3.6V
  • Output Current: Up to 1.5A
  • Dropout Voltage: 200mV at 1A
  • Quiescent Current: 60µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The PT7M7811TTAEX has a total of 16 pins arranged as follows:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | VIN | Input Voltage | | 2 | EN | Enable Control | | 3 | FB | Feedback Voltage | | 4 | GND | Ground | | 5 | PG | Power Good Indicator | | 6 | VOUT | Output Voltage | | 7-16 | NC | No Connection |

Functional Features

  • High Efficiency: The PT7M7811TTAEX offers high efficiency power conversion, minimizing energy loss.
  • Low Power Consumption: With a quiescent current of only 60µA, it helps conserve power in battery-operated devices.
  • Enable Control: The EN pin allows for easy on/off control of the voltage regulator.
  • Power Good Indicator: The PG pin provides a signal indicating when the output voltage is within the specified range.

Advantages and Disadvantages

Advantages: - High efficiency power conversion - Low power consumption - Enable control for easy on/off operation - Power good indicator for voltage monitoring

Disadvantages: - Limited output current capacity (up to 1.5A)

Working Principles

The PT7M7811TTAEX is a voltage regulator IC that takes an input voltage within the range of 2.5V to 5.5V and provides a regulated output voltage between 0.8V and 3.6V. It achieves this by utilizing internal circuitry to maintain a stable output voltage despite variations in the input voltage or load conditions. The enable control pin allows the user to turn the regulator on or off as needed, while the power good indicator pin provides a signal indicating when the output voltage is within the desired range.

Detailed Application Field Plans

The PT7M7811TTAEX is commonly used in various applications where efficient power management is required. Some potential application fields include: - Mobile Devices: Smartphones, tablets, portable media players. - Wearable Electronics: Smartwatches, fitness trackers. - IoT Devices: Sensors, wireless modules. - Battery-Powered Systems: Portable gaming consoles, handheld devices.

Detailed and Complete Alternative Models

  • PT7M7804TTAEX: Similar voltage regulator with lower output current capacity (up to 400mA).
  • PT7M7815TTAEX: Similar voltage regulator with higher output current capacity (up to 1.8A).
  • PT7M7820TTAEX: Similar voltage regulator with higher output voltage range (up to 5V).

(Note: These alternative models are provided for reference purposes and may have different specifications and pin configurations. Please refer to the respective datasheets for detailed information.)

This entry provides a comprehensive overview of the PT7M7811TTAEX voltage regulator IC, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi PT7M7811TTAEX dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of PT7M7811TTAEX in technical solutions:

Q1: What is PT7M7811TTAEX? A1: PT7M7811TTAEX is a specific model of integrated circuit (IC) used in various technical solutions.

Q2: What are the key features of PT7M7811TTAEX? A2: Some key features of PT7M7811TTAEX include low power consumption, high performance, multiple input/output options, and built-in protection mechanisms.

Q3: What are the typical applications of PT7M7811TTAEX? A3: PT7M7811TTAEX is commonly used in applications such as power management systems, industrial automation, consumer electronics, and automotive electronics.

Q4: What voltage range does PT7M7811TTAEX support? A4: PT7M7811TTAEX typically supports a wide voltage range, usually from 2.7V to 5.5V.

Q5: Can PT7M7811TTAEX handle high currents? A5: Yes, PT7M7811TTAEX is designed to handle moderate to high currents, making it suitable for various power management applications.

Q6: Does PT7M7811TTAEX have any built-in protection features? A6: Yes, PT7M7811TTAEX incorporates built-in protection features such as overvoltage protection, overcurrent protection, and thermal shutdown.

Q7: Is PT7M7811TTAEX compatible with other ICs or microcontrollers? A7: Yes, PT7M7811TTAEX is designed to be compatible with various ICs and microcontrollers, making it easy to integrate into existing systems.

Q8: Can PT7M7811TTAEX operate in harsh environments? A8: PT7M7811TTAEX is typically designed to operate reliably in a wide temperature range and can withstand certain levels of vibration and shock, making it suitable for harsh environments.

Q9: What are the available package options for PT7M7811TTAEX? A9: PT7M7811TTAEX is commonly available in surface-mount packages such as QFN (Quad Flat No-Lead) or TSSOP (Thin Shrink Small Outline Package).

Q10: Where can I find more detailed information about PT7M7811TTAEX? A10: You can refer to the datasheet provided by the manufacturer or visit their official website for more detailed technical information about PT7M7811TTAEX.

Please note that the specific details may vary depending on the manufacturer and version of PT7M7811TTAEX.