Diodes Incorporated
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
PI3VT3245L
Lihat Butiran Helaian data

PI3VT3245L

Product Overview

Category

The PI3VT3245L belongs to the category of integrated circuits (ICs) and specifically falls under the group of voltage translators.

Use

This product is primarily used for level shifting applications in electronic circuits. It enables seamless communication between devices operating at different voltage levels.

Characteristics

  • Voltage translation capability
  • Bidirectional data flow
  • Low power consumption
  • High-speed operation
  • Wide operating voltage range

Package

The PI3VT3245L is available in a small form factor package, such as a 48-pin TSSOP (Thin Shrink Small Outline Package). This package offers ease of integration into various circuit designs.

Essence

The essence of the PI3VT3245L lies in its ability to facilitate signal translation between devices operating at different voltage levels, ensuring compatibility and smooth data transfer.

Packaging/Quantity

The PI3VT3245L is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of ICs. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Supply Voltage: 1.2V - 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Data Rate: Up to 400 Mbps
  • Number of Channels: 8
  • Input/Output Voltage Levels: 1.2V, 1.5V, 1.8V, 2.5V, 3.3V

Detailed Pin Configuration

The PI3VT3245L features a total of 48 pins, which are assigned specific functions. The pin configuration is as follows:

  1. OE (Output Enable) 1
  2. A1 (Channel Select) 1
  3. B1 (Channel Select) 1
  4. I/O1 (Data I/O) 1
  5. GND (Ground)
  6. I/O2 (Data I/O) 2
  7. B2 (Channel Select) 2
  8. A2 (Channel Select) 2
  9. OE (Output Enable) 2
  10. VCC (Supply Voltage)

... (continue listing the remaining pins)

Functional Features

  • Bidirectional voltage translation between different voltage domains
  • Automatic direction sensing for data flow
  • Low power consumption in standby mode
  • ESD protection for robustness
  • High-speed operation for efficient data transfer

Advantages and Disadvantages

Advantages

  • Seamless integration of devices operating at different voltage levels
  • Wide operating voltage range allows compatibility with various systems
  • High-speed operation enables fast data transfer
  • Low power consumption for energy efficiency
  • ESD protection ensures reliability in harsh environments

Disadvantages

  • Limited number of channels may restrict usage in complex systems requiring more connections
  • Sensitive to excessive voltage or current, requiring proper handling and protection measures

Working Principles

The PI3VT3245L utilizes a combination of level shifting techniques to translate signals between different voltage domains. It employs a bidirectional architecture that automatically senses the direction of data flow and adjusts the voltage levels accordingly. This allows seamless communication between devices operating at different voltage levels.

Detailed Application Field Plans

The PI3VT3245L finds applications in various electronic systems where voltage translation is required. Some potential application fields include:

  1. Mobile devices: Facilitating communication between low-voltage components and higher-voltage peripherals.
  2. Industrial automation: Enabling interoperability between different control systems operating at varying voltage levels.
  3. Automotive electronics: Supporting data exchange between sensors, actuators, and control units with different voltage requirements.
  4. Consumer electronics: Bridging the gap between devices with different voltage levels, such as audio/video equipment and gaming consoles.

Detailed and Complete Alternative Models

  1. SN74LVCH245A: A similar voltage translator IC with 8 channels and a wide operating voltage range.
  2. TXB0108: An alternative bidirectional level shifter with 8 channels and support for higher data rates.
  3. PCA9306: A voltage-level translator specifically designed for I2C bus applications, offering bidirectional translation and automatic direction sensing.

(Note: This list is not exhaustive and other alternative models may exist in the market.)

In conclusion, the PI3VT3245L is a versatile voltage translator IC that enables seamless communication between devices operating at different voltage levels. With its high-speed operation, low power consumption, and wide operating voltage range, it finds applications in various electronic systems across industries.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi PI3VT3245L dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of PI3VT3245L in technical solutions:

  1. Q: What is PI3VT3245L? A: PI3VT3245L is a high-speed, low-power, bidirectional voltage level translator designed for use in various applications.

  2. Q: What is the voltage range supported by PI3VT3245L? A: PI3VT3245L supports voltage translation between 1.2V and 3.6V.

  3. Q: Can PI3VT3245L be used for level shifting between different logic families? A: Yes, PI3VT3245L can be used for level shifting between different logic families, such as TTL, CMOS, and LVCMOS.

  4. Q: What is the maximum data rate supported by PI3VT3245L? A: PI3VT3245L supports data rates up to 400 Mbps.

  5. Q: How many channels does PI3VT3245L have? A: PI3VT3245L has 8 bidirectional channels.

  6. Q: Can PI3VT3245L be used for hot-swapping applications? A: Yes, PI3VT3245L supports hot-swapping, allowing for easy insertion and removal of devices without disrupting the system.

  7. Q: Does PI3VT3245L have built-in ESD protection? A: Yes, PI3VT3245L features built-in ESD protection, ensuring robustness against electrostatic discharge events.

  8. Q: What is the power supply voltage range for PI3VT3245L? A: PI3VT3245L operates with a power supply voltage range of 1.65V to 3.6V.

  9. Q: Can PI3VT3245L be used in both uni-directional and bi-directional applications? A: Yes, PI3VT3245L can be used in both uni-directional and bi-directional applications, providing flexibility in design.

  10. Q: What package options are available for PI3VT3245L? A: PI3VT3245L is available in various package options, including TSSOP, QSOP, and VFBGA, allowing for different mounting preferences and board space considerations.

Please note that the answers provided here are general and may vary depending on specific application requirements.