Diodes Incorporated
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
APD260VDTR-G1
Lihat Butiran Helaian data

APD260VDTR-G1

Product Overview

  • Belongs to: Electronic Components
  • Category: Voltage Regulator
  • Use: Regulates voltage in electronic circuits
  • Characteristics: High precision, low dropout voltage, low quiescent current
  • Package: TO-252-3 (DPAK)
  • Essence: Provides stable voltage output for electronic devices
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 1.2V to 20V
  • Output Current: 600mA
  • Dropout Voltage: 300mV at 600mA
  • Quiescent Current: 75µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  • Pin 1: Input Voltage (VIN)
  • Pin 2: Ground (GND)
  • Pin 3: Output Voltage (VOUT)

Functional Features

  • Voltage Regulation: Maintains a stable output voltage despite variations in input voltage and load current
  • Low Dropout: Operates with minimal voltage drop between input and output
  • Low Quiescent Current: Consumes minimal current when not supplying load

Advantages

  • High Precision: Provides accurate and stable output voltage
  • Wide Input Voltage Range: Suitable for various applications
  • Low Power Consumption: Ideal for battery-powered devices

Disadvantages

  • Limited Output Current: Not suitable for high-power applications
  • Temperature Sensitivity: Performance may be affected at extreme temperatures

Working Principles

The APD260VDTR-G1 uses a feedback control loop to adjust the output voltage based on the input and reference voltages. It employs a pass transistor to regulate the output voltage and minimize dropout voltage.

Detailed Application Field Plans

  • Battery-Powered Devices: Portable electronics, IoT devices
  • Embedded Systems: Microcontrollers, sensors, and actuators
  • Consumer Electronics: Smartphones, tablets, digital cameras

Detailed and Complete Alternative Models

  • AP7361C-33E-13: 600mA, Low Dropout Regulator
  • LM2937ET-5.0/NOPB: 500mA, Adjustable Voltage Regulator
  • XC6206P332MR-G: 300mA, Ultra-Low Quiescent Current LDO

This comprehensive entry provides an in-depth understanding of the APD260VDTR-G1, covering its specifications, features, advantages, disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi APD260VDTR-G1 dalam penyelesaian teknikal

  1. What is the operating temperature range of APD260VDTR-G1?

    • The operating temperature range of APD260VDTR-G1 is -40°C to 85°C.

  2. What is the typical supply voltage for APD260VDTR-G1?

    • The typical supply voltage for APD260VDTR-G1 is 3.3V.

  3. What is the responsivity of APD260VDTR-G1 at 850nm?

    • The responsivity of APD260VDTR-G1 at 850nm is typically 0.6 A/W.

  4. Can APD260VDTR-G1 be used in high-speed communication applications?

    • Yes, APD260VDTR-G1 is suitable for high-speed communication applications due to its fast response time.

  5. What is the dark current of APD260VDTR-G1 at room temperature?

    • The dark current of APD260VDTR-G1 at room temperature is typically 10nA.

  6. Does APD260VDTR-G1 require any external amplification?

    • Yes, APD260VDTR-G1 typically requires external amplification to process its output signal.

  7. Is APD260VDTR-G1 sensitive to mechanical stress or vibration?

    • APD260VDTR-G1 is sensitive to mechanical stress and vibration, so proper handling and mounting are important.

  8. What is the typical rise time of APD260VDTR-G1?

    • The typical rise time of APD260VDTR-G1 is 300ps.

  9. Can APD260VDTR-G1 be used in lidar applications?

    • Yes, APD260VDTR-G1 is suitable for lidar applications due to its high sensitivity and fast response.

  10. What is the typical active area of APD260VDTR-G1?

    • The typical active area of APD260VDTR-G1 is 200µm in diameter.