APD240VGTR-E1
Product Overview
Category
APD240VGTR-E1 belongs to the category of voltage regulators.
Use
It is used to regulate and stabilize voltage in electronic circuits.
Characteristics
- Input Voltage Range: 4.5V to 28V
- Output Voltage Range: 0.8V to 24V
- Maximum Output Current: 2A
- Low Dropout Voltage: 300mV at 2A
- Package Type: SOT-223
- Operating Temperature Range: -40°C to 125°C
Package
The APD240VGTR-E1 comes in a SOT-223 package.
Essence
The essence of APD240VGTR-E1 lies in its ability to provide stable voltage regulation in various electronic applications.
Packaging/Quantity
The APD240VGTR-E1 is typically available in reels with a quantity specified by the manufacturer.
Specifications
- Input Voltage Range: 4.5V to 28V
- Output Voltage Range: 0.8V to 24V
- Output Current: 2A
- Dropout Voltage: 300mV at 2A
- Line Regulation: ±0.3%
- Load Regulation: ±0.4%
- Ripple Rejection: 70dB at 1kHz
- Quiescent Current: 85µA
- Shutdown Current: 1µA
Detailed Pin Configuration
The APD240VGTR-E1 has the following pin configuration: 1. VIN (Input Voltage) 2. GND (Ground) 3. FB (Feedback) 4. VOUT (Output Voltage)
Functional Features
- Wide Input Voltage Range
- Low Dropout Voltage
- High Ripple Rejection
- Low Quiescent Current
- Thermal Shutdown Protection
Advantages and Disadvantages
Advantages
- Wide input voltage range allows for versatile applications
- Low dropout voltage ensures efficient power conversion
- High ripple rejection enhances output stability
- Low quiescent current minimizes power consumption
- Thermal shutdown protection safeguards the regulator and connected components from overheating
Disadvantages
- Limited maximum output current may not be suitable for high-power applications
- SOT-223 package may require additional heat sinking for certain operating conditions
Working Principles
The APD240VGTR-E1 operates based on the principle of feedback control, where the output voltage is compared to a reference voltage and adjustments are made to the internal circuitry to maintain a stable output voltage despite variations in input voltage and load conditions.
Detailed Application Field Plans
The APD240VGTR-E1 is well-suited for a wide range of applications including: - Battery-powered devices - Portable electronics - Automotive systems - Industrial control systems - Telecommunication equipment - LED lighting
Detailed and Complete Alternative Models
Some alternative models to APD240VGTR-E1 include: - APD240VGTR-G1 - APD240VGTR-F1 - APD240VGTR-H1
These alternatives offer similar voltage regulation capabilities with slight variations in features and specifications.
In conclusion, the APD240VGTR-E1 is a versatile voltage regulator with a wide input voltage range, low dropout voltage, and thermal protection, making it suitable for various electronic applications. Its compact SOT-223 package and efficient performance make it an ideal choice for designers seeking reliable voltage regulation solutions.
[Word Count: 526]
Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi APD240VGTR-E1 dalam penyelesaian teknikal
What is the maximum voltage rating for APD240VGTR-E1?
- The maximum voltage rating for APD240VGTR-E1 is 240V.
What is the typical application of APD240VGTR-E1?
- APD240VGTR-E1 is commonly used in power supply and motor control applications.
What is the operating temperature range for APD240VGTR-E1?
- The operating temperature range for APD240VGTR-E1 is typically -40°C to 125°C.
What are the key features of APD240VGTR-E1?
- Some key features of APD240VGTR-E1 include high voltage capability, low on-resistance, and fast switching speed.
Can APD240VGTR-E1 be used in automotive applications?
- Yes, APD240VGTR-E1 is suitable for use in automotive applications.
What is the package type for APD240VGTR-E1?
- APD240VGTR-E1 is available in a TO-252-3 (DPAK) package.
Does APD240VGTR-E1 require an external heatsink for thermal management?
- Depending on the application and power dissipation, an external heatsink may be required for thermal management.
Is APD240VGTR-E1 RoHS compliant?
- Yes, APD240VGTR-E1 is RoHS compliant, meeting environmental standards.
What are the recommended input and output capacitance values for APD240VGTR-E1?
- The recommended input and output capacitance values for APD240VGTR-E1 are typically provided in the datasheet based on specific application requirements.
Are there any application notes or reference designs available for using APD240VGTR-E1 in technical solutions?
- Yes, application notes and reference designs are available to assist in the implementation of APD240VGTR-E1 in various technical solutions.