Cypress Semiconductor Corp
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
S25FL128SAGNFM003
Lihat Butiran Helaian data

S25FL128SAGNFM003

Product Overview

Category

The S25FL128SAGNFM003 belongs to the category of flash memory devices.

Use

This product is primarily used for data storage in various electronic devices, such as smartphones, tablets, digital cameras, and solid-state drives (SSDs).

Characteristics

  • High-speed read and write operations
  • Non-volatile memory
  • Low power consumption
  • Large storage capacity
  • Compact size

Package

The S25FL128SAGNFM003 is available in a small form factor package, making it suitable for integration into compact electronic devices.

Essence

The essence of this product lies in its ability to provide reliable and high-performance data storage solutions for a wide range of electronic applications.

Packaging/Quantity

The S25FL128SAGNFM003 is typically packaged in reels or trays, with varying quantities depending on customer requirements.

Specifications

  • Memory Capacity: 128 megabits (16 megabytes)
  • Interface: Serial Peripheral Interface (SPI)
  • Operating Voltage: 2.7V - 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Erase/Program Cycle Endurance: 100,000 cycles
  • Data Retention: 20 years

Detailed Pin Configuration

  1. VCC - Power supply voltage
  2. GND - Ground
  3. HOLD - Suspends ongoing data transfer
  4. WP - Write protect
  5. SCK - Serial clock input
  6. SI - Serial data input
  7. SO - Serial data output
  8. CS - Chip select

Functional Features

  • Fast read and write operations
  • Sector erase capability
  • Software and hardware protection mechanisms
  • Efficient power management
  • Error detection and correction algorithms

Advantages and Disadvantages

Advantages

  • High-speed data transfer
  • Low power consumption
  • Compact size
  • Reliable and durable
  • Wide operating temperature range

Disadvantages

  • Limited storage capacity compared to other flash memory options
  • Relatively higher cost per unit compared to traditional hard drives

Working Principles

The S25FL128SAGNFM003 utilizes the Serial Peripheral Interface (SPI) for communication with the host device. It stores data in non-volatile memory cells, which retain information even when power is disconnected. The device uses a combination of electronic circuits and firmware algorithms to enable fast and reliable data read and write operations.

Detailed Application Field Plans

The S25FL128SAGNFM003 is widely used in various electronic devices that require high-speed and reliable data storage. Some common application fields include:

  1. Smartphones and tablets
  2. Digital cameras
  3. Solid-state drives (SSDs)
  4. Automotive electronics
  5. Industrial control systems

Detailed and Complete Alternative Models

  1. S25FL064L - 64 megabits flash memory
  2. S25FL256S - 256 megabits flash memory
  3. S25FL512S - 512 megabits flash memory
  4. S25FL204K - 4 megabits flash memory
  5. S25FL116K - 16 megabits flash memory

These alternative models offer different storage capacities and features to cater to diverse application requirements.

Word count: 441 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi S25FL128SAGNFM003 dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of S25FL128SAGNFM003 in technical solutions:

1. What is the S25FL128SAGNFM003? - The S25FL128SAGNFM003 is a flash memory device manufactured by Cypress Semiconductor. It offers 128 megabits (16 megabytes) of non-volatile storage.

2. What are the main features of the S25FL128SAGNFM003? - The key features include high-speed read and write operations, low power consumption, wide voltage range, sector erase capability, and compatibility with SPI interface.

3. What are some typical applications for the S25FL128SAGNFM003? - This flash memory device is commonly used in various applications such as automotive systems, industrial automation, consumer electronics, networking equipment, and IoT devices.

4. What is the maximum data transfer rate supported by the S25FL128SAGNFM003? - The device supports a maximum clock frequency of 104 MHz, which translates to a maximum data transfer rate of 52 megabytes per second.

5. How many erase sectors does the S25FL128SAGNFM003 have? - The device has 256 uniform 64-kilobyte erase sectors, allowing for efficient erasure and programming of data.

6. Can the S25FL128SAGNFM003 be operated at different voltage levels? - Yes, it supports a wide voltage range from 2.7V to 3.6V, making it compatible with a variety of system designs.

7. Does the S25FL128SAGNFM003 support hardware and software protection mechanisms? - Yes, it provides several security features like hardware and software protection, including write protection, block protection, and password protection.

8. What is the typical endurance of the S25FL128SAGNFM003? - The device has a typical endurance of 100,000 program/erase cycles per sector, ensuring reliable and long-lasting data storage.

9. Can the S25FL128SAGNFM003 operate in extreme temperature conditions? - Yes, it has an extended temperature range of -40°C to +85°C, making it suitable for applications that require operation in harsh environments.

10. Is the S25FL128SAGNFM003 RoHS compliant? - Yes, it is compliant with the Restriction of Hazardous Substances (RoHS) directive, ensuring its environmental friendliness.

Please note that these answers are general and may vary depending on specific application requirements and datasheet specifications.