Comchip Technology
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
5KP160A-G
Lihat Butiran Helaian data

5KP160A-G Product Overview

Introduction

The 5KP160A-G is a high-power transient voltage suppressor (TVS) diode designed to protect electronic circuits from voltage transients. This entry provides a comprehensive overview of the 5KP160A-G, including its product category, basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Product Category

The 5KP160A-G belongs to the category of TVS diodes, which are semiconductor devices used to protect sensitive electronics from voltage spikes and surges.

Basic Information Overview

  • Use: The 5KP160A-G is used to protect electronic circuits from voltage transients caused by lightning, ESD, or other electrical disturbances.
  • Characteristics: It offers high surge capability, low clamping voltage, and fast response time.
  • Package: The 5KP160A-G is available in a DO-201AD package.
  • Essence: Its essence lies in providing robust protection for electronic components against transient voltage events.
  • Packaging/Quantity: It is typically packaged in reels or trays, with quantities varying based on manufacturer specifications.

Specifications

  • Peak Power Dissipation: 5000W
  • Breakdown Voltage: 160V
  • Operating Temperature Range: -55°C to +175°C
  • Polarity: Unidirectional
  • Mounting Type: Through Hole

Detailed Pin Configuration

The 5KP160A-G has a standard axial lead configuration with two leads for through-hole mounting.

Functional Features

  • Transient Voltage Suppression: Effectively clamps transient voltages to protect downstream components.
  • Fast Response Time: Rapid reaction to transient events ensures minimal impact on the protected circuitry.

Advantages and Disadvantages

Advantages

  • High surge capability
  • Low clamping voltage
  • Fast response time
  • Robust protection against transient events

Disadvantages

  • Unidirectional protection only
  • Requires proper heat dissipation in high-power applications

Working Principles

When a transient voltage event occurs, the 5KP160A-G conducts current to divert the excess energy away from the protected circuit, thereby limiting the voltage across the load.

Detailed Application Field Plans

The 5KP160A-G is commonly used in the following applications: - Power supplies - Telecommunication equipment - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

  • 5KP110A-G: Lower breakdown voltage variant
  • 5KP170A-G: Higher breakdown voltage variant
  • 5KP160CA-G: Bidirectional TVS diode with similar specifications

In conclusion, the 5KP160A-G is a vital component in safeguarding electronic circuits from transient voltage events, offering high surge capability, low clamping voltage, and fast response time. Its application spans various industries, and it has alternative models catering to different voltage requirements.

Word Count: 410

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi 5KP160A-G dalam penyelesaian teknikal

Sure, here are 10 common questions and answers related to the application of 5KP160A-G in technical solutions:

  1. What is the maximum peak pulse power dissipation of 5KP160A-G?

    • The maximum peak pulse power dissipation of 5KP160A-G is 5000 watts for a 10/1000 μs waveform.

  2. What is the breakdown voltage of 5KP160A-G?

    • The breakdown voltage of 5KP160A-G is 160 volts.

  3. What is the typical clamping voltage of 5KP160A-G?

    • The typical clamping voltage of 5KP160A-G is 259 volts at 16.7A.

  4. What is the maximum junction temperature of 5KP160A-G?

    • The maximum junction temperature of 5KP160A-G is 150°C.

  5. What are the applications of 5KP160A-G?

    • 5KP160A-G is commonly used in surge protection for sensitive electronics, such as in telecommunications equipment, industrial control systems, and power supplies.

  6. What is the response time of 5KP160A-G?

    • The response time of 5KP160A-G is typically less than 1.0 picoseconds from 0 volts to BV min.

  7. What is the operating and storage temperature range of 5KP160A-G?

    • The operating temperature range of 5KP160A-G is -55°C to +175°C, and the storage temperature range is -55°C to +175°C.

  8. Does 5KP160A-G meet RoHS requirements?

    • Yes, 5KP160A-G is compliant with RoHS (Restriction of Hazardous Substances) requirements.

  9. What is the package type of 5KP160A-G?

    • 5KP160A-G is available in a DO-201AD package.

  10. Is 5KP160A-G suitable for high-reliability applications?

    • Yes, 5KP160A-G is suitable for high-reliability applications due to its robust design and performance characteristics.

I hope these answers provide the information you were looking for! If you have any more questions, feel free to ask.