QD Devices Inc.
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
OP496GSZ
Lihat Butiran Helaian data

OP496GSZ

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Operational Amplifier
  • Characteristics: High precision, low noise, rail-to-rail output, single supply voltage operation
  • Package: Small Outline Package (SOIC)
  • Essence: The OP496GSZ is a high-performance operational amplifier designed for various applications requiring precision and low noise amplification.
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Supply Voltage: Single Supply: 2.7V to 36V, Dual Supply: ±1.35V to ±18V
  • Input Offset Voltage: ±0.5mV (maximum)
  • Input Bias Current: ±1nA (maximum)
  • Gain Bandwidth Product: 10MHz (typical)
  • Slew Rate: 3V/µs (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The OP496GSZ has a standard 8-pin small outline package (SOIC) with the following pin configuration:

  1. Non-Inverting Input (+IN)
  2. Inverting Input (-IN)
  3. Negative Power Supply (V-)
  4. Positive Power Supply (V+)
  5. Output (OUT)
  6. Null Pin (NC)
  7. Null Pin (NC)
  8. Ground (GND)

Functional Features

  • High precision amplification with low offset voltage and bias current
  • Rail-to-rail output swing allows for maximum dynamic range
  • Wide supply voltage range enables single or dual supply operation
  • Low noise performance for accurate signal amplification
  • Stable operation over a wide temperature range

Advantages and Disadvantages

Advantages: - High precision amplification - Low noise performance - Rail-to-rail output swing - Wide supply voltage range

Disadvantages: - Limited availability in small quantity packaging options

Working Principles

The OP496GSZ is based on a differential amplifier configuration that amplifies the voltage difference between its non-inverting and inverting inputs. It utilizes internal compensation techniques to achieve high precision amplification with low offset voltage and bias current. The rail-to-rail output stage allows the amplifier to provide maximum dynamic range by driving the output voltage close to the supply rails.

Detailed Application Field Plans

The OP496GSZ is suitable for a wide range of applications including:

  1. Sensor signal conditioning
  2. Data acquisition systems
  3. Medical instrumentation
  4. Audio amplification
  5. Battery-powered devices
  6. Industrial control systems

Detailed and Complete Alternative Models

  1. OP497GSZ: Similar specifications, but with dual operational amplifiers in a single package.
  2. OP484FSZ: Lower power consumption, lower input offset voltage, and higher slew rate.
  3. LT1490CS8: Low power, low noise, and rail-to-rail output swing.

These alternative models offer similar functionality and can be considered as substitutes for the OP496GSZ depending on specific application requirements.

Word count: 342 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi OP496GSZ dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of OP496GSZ in technical solutions:

  1. Q: What is OP496GSZ? A: OP496GSZ is a specific model of operational amplifier (op-amp) manufactured by a particular company.

  2. Q: What are the key features of OP496GSZ? A: Some key features of OP496GSZ include low offset voltage, low input bias current, high open-loop gain, and wide bandwidth.

  3. Q: What are the typical applications of OP496GSZ? A: OP496GSZ is commonly used in precision instrumentation, sensor signal conditioning, data acquisition systems, and other high-accuracy analog circuits.

  4. Q: What is the supply voltage range for OP496GSZ? A: The supply voltage range for OP496GSZ typically ranges from ±2.5V to ±18V.

  5. Q: What is the input voltage range of OP496GSZ? A: The input voltage range of OP496GSZ typically extends from the negative supply voltage to the positive supply voltage.

  6. Q: What is the output voltage swing of OP496GSZ? A: The output voltage swing of OP496GSZ typically covers a wide range close to the supply voltage rails.

  7. Q: Can OP496GSZ operate with a single power supply? A: Yes, OP496GSZ can be operated with a single power supply, as long as it is within the specified supply voltage range.

  8. Q: Is OP496GSZ suitable for low-power applications? A: Yes, OP496GSZ has low quiescent current consumption, making it suitable for low-power applications.

  9. Q: Does OP496GSZ have built-in protection features? A: OP496GSZ typically includes built-in protection features such as overvoltage protection and thermal shutdown.

  10. Q: Can OP496GSZ be used in high-temperature environments? A: Yes, OP496GSZ is designed to operate reliably in a wide temperature range, including high-temperature environments.

Please note that the specific details and answers may vary depending on the manufacturer's datasheet and application requirements.