Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
ADP2164ACPZ-R7

ADP2164ACPZ-R7

Product Overview

Category

ADP2164ACPZ-R7 belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation
  • Power management
  • High efficiency
  • Low power consumption

Package

ADP2164ACPZ-R7 is available in a small form factor package, which makes it suitable for compact electronic devices.

Essence

The essence of ADP2164ACPZ-R7 lies in its ability to regulate voltage and manage power efficiently, making it an essential component in various electronic devices.

Packaging/Quantity

ADP2164ACPZ-R7 is typically packaged in reels or trays, with a quantity of 2500 units per reel/tray.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to 3.3V
  • Maximum Output Current: 1A
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

ADP2164ACPZ-R7 has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage pin

Functional Features

  • Wide input voltage range allows compatibility with various power sources.
  • High efficiency ensures minimal power loss during voltage regulation.
  • Enable pin provides control over the device's operation.
  • Feedback pin enables accurate voltage regulation.
  • Output voltage pin delivers regulated voltage to the connected circuitry.

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption.
  • Wide input voltage range enhances compatibility.
  • Small form factor package enables use in compact devices.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Operating temperature range may restrict usage in extreme environments.

Working Principles

ADP2164ACPZ-R7 operates based on a switching regulator principle. It uses an internal control circuit to regulate the input voltage and provide a stable output voltage. The feedback pin continuously monitors the output voltage and adjusts the internal control circuit accordingly to maintain the desired voltage level.

Detailed Application Field Plans

ADP2164ACPZ-R7 finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable gaming consoles - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to ADP2164ACPZ-R7 are: - LM2576-ADJ - LT1083CP - TPS5430DDAR

These models offer similar voltage regulation and power management capabilities, but may have different specifications and pin configurations.

In conclusion, ADP2164ACPZ-R7 is an integrated circuit used for voltage regulation and power management in electronic devices. Its high efficiency, wide input voltage range, and small form factor make it suitable for various applications. However, its limited maximum output current and operating temperature range should be taken into consideration.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi ADP2164ACPZ-R7 dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of ADP2164ACPZ-R7 in technical solutions:

  1. Q: What is ADP2164ACPZ-R7? A: ADP2164ACPZ-R7 is a voltage regulator IC (integrated circuit) designed for power management applications.

  2. Q: What is the input voltage range of ADP2164ACPZ-R7? A: The input voltage range of ADP2164ACPZ-R7 is typically between 2.3V and 5.5V.

  3. Q: What is the output voltage range of ADP2164ACPZ-R7? A: The output voltage range of ADP2164ACPZ-R7 can be adjusted from 0.6V to 3.3V using external resistors.

  4. Q: What is the maximum output current of ADP2164ACPZ-R7? A: ADP2164ACPZ-R7 can provide a maximum output current of up to 1.5A.

  5. Q: Is ADP2164ACPZ-R7 suitable for battery-powered applications? A: Yes, ADP2164ACPZ-R7 is suitable for battery-powered applications as it has low quiescent current and supports low dropout voltage operation.

  6. Q: Does ADP2164ACPZ-R7 have built-in protection features? A: Yes, ADP2164ACPZ-R7 includes various protection features such as overcurrent protection, thermal shutdown, and undervoltage lockout.

  7. Q: Can ADP2164ACPZ-R7 operate in a wide temperature range? A: Yes, ADP2164ACPZ-R7 is designed to operate in a wide temperature range, typically from -40°C to +125°C.

  8. Q: What is the typical efficiency of ADP2164ACPZ-R7? A: The typical efficiency of ADP2164ACPZ-R7 can be as high as 95%, depending on the input and output voltage conditions.

  9. Q: Does ADP2164ACPZ-R7 require any external components for operation? A: Yes, ADP2164ACPZ-R7 requires a few external components such as input/output capacitors and resistors to set the output voltage.

  10. Q: Is ADP2164ACPZ-R7 RoHS compliant? A: Yes, ADP2164ACPZ-R7 is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.

Please note that the answers provided here are general and may vary based on specific datasheet specifications and application requirements.