Adesto Technologies
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
AT25DN011-MAHFHT-T
Lihat Butiran Helaian data

AT25DN011-MAHFHT-T

Product Overview

Category

The AT25DN011-MAHFHT-T belongs to the category of serial NOR Flash memory.

Use

It is commonly used for storing program code and data in various electronic devices such as microcontrollers, IoT devices, and consumer electronics.

Characteristics

  • High-speed read operations
  • Low power consumption
  • Wide operating voltage range
  • Small form factor
  • Reliable data retention

Package

The AT25DN011-MAHFHT-T is available in a compact 8-lead SOIC package.

Essence

This flash memory device provides non-volatile storage with fast access times and low power requirements.

Packaging/Quantity

The AT25DN011-MAHFHT-T is typically supplied in reels with a quantity of 2500 units per reel.

Specifications

  • Capacity: 1 Megabit (128K x 8)
  • Interface: Serial Peripheral Interface (SPI)
  • Operating Voltage: 2.7V - 3.6V
  • Operating Temperature Range: -40°C to 85°C
  • Data Retention: 20 years
  • Erase/Program Cycle Endurance: 100,000 cycles

Detailed Pin Configuration

The AT25DN011-MAHFHT-T has the following pin configuration: 1. Chip Select (/CS) 2. Serial Clock (SCK) 3. Serial Data Input/Output (SI/SO) 4. Write Protect (/WP) 5. Ground (GND) 6. Power Supply (VCC) 7. Hold (/HOLD) 8. Not Connected (NC)

Functional Features

  • Fast SPI interface for high-speed data transfer
  • Flexible erase and program capability
  • Hardware and software write protection
  • Deep power-down mode for ultra-low standby power consumption

Advantages and Disadvantages

Advantages

  • High-speed read operations improve overall system performance
  • Low power consumption extends battery life in portable devices
  • Wide operating voltage range enhances compatibility with different systems

Disadvantages

  • Limited capacity compared to other types of non-volatile memory
  • Relatively lower write endurance compared to some competing technologies

Working Principles

The AT25DN011-MAHFHT-T operates by using the SPI interface to communicate with the host microcontroller or system. When data needs to be stored or retrieved, the SPI interface allows for efficient transfer of information between the flash memory and the controlling device.

Detailed Application Field Plans

The AT25DN011-MAHFHT-T is well-suited for use in the following applications: - Embedded systems - Internet of Things (IoT) devices - Wearable technology - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to the AT25DN011-MAHFHT-T include: - W25Q80BVSSIG - S25FL116K0XMFI011

In summary, the AT25DN011-MAHFHT-T is a versatile serial NOR Flash memory device that offers high-speed read operations, low power consumption, and reliable data storage. Its compact package and wide operating voltage range make it suitable for a variety of embedded and IoT applications.

Word Count: 443

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi AT25DN011-MAHFHT-T dalam penyelesaian teknikal

  1. What is the AT25DN011-MAHFHT-T?

    • The AT25DN011-MAHFHT-T is a serial NOR flash memory device with a capacity of 1 megabit, commonly used in embedded systems and IoT devices.

  2. What are the key features of the AT25DN011-MAHFHT-T?

    • It features a high-speed SPI interface, low power consumption, and a wide voltage range, making it suitable for various applications.

  3. How can the AT25DN011-MAHFHT-T be integrated into technical solutions?

    • It can be used for firmware storage, data logging, code execution, and configuration storage in a wide range of electronic devices.

  4. What are the typical operating conditions for the AT25DN011-MAHFHT-T?

    • It operates within a voltage range of 1.65V to 3.6V and at temperatures ranging from -40°C to 85°C.

  5. What are the programming and erasing capabilities of the AT25DN011-MAHFHT-T?

    • It supports both byte and page programming, as well as sector and bulk erasing, providing flexibility for data manipulation.

  6. Can the AT25DN011-MAHFHT-T withstand harsh environmental conditions?

    • Yes, it is designed to withstand industrial temperature ranges and has robustness against environmental stress factors.

  7. How does the AT25DN011-MAHFHT-T ensure data integrity and reliability?

    • It incorporates advanced error correction techniques and wear-leveling algorithms to maintain data integrity and extend the lifespan of the memory.

  8. What are the security features of the AT25DN011-MAHFHT-T?

    • It offers hardware-based write protection, secure OTP (one-time programmable) area, and unique ID for device authentication, enhancing system security.

  9. Is the AT25DN011-MAHFHT-T compatible with standard industry interfaces and protocols?

    • Yes, it is compatible with SPI (Serial Peripheral Interface) and supports industry-standard commands for easy integration into existing designs.

  10. Where can I find comprehensive technical documentation and support for the AT25DN011-MAHFHT-T?

    • Detailed datasheets, application notes, and technical support are available from the manufacturer's website, providing comprehensive resources for design and implementation.