S-80844CLNB-B65T2G
Product Overview
Category
S-80844CLNB-B65T2G belongs to the category of integrated circuits (ICs).
Use
This product is commonly used as a voltage detector in various electronic devices.
Characteristics
- Low power consumption
- Wide operating voltage range
- High accuracy
- Small package size
Package
The S-80844CLNB-B65T2G comes in a compact surface-mount package, making it suitable for space-constrained applications.
Essence
The essence of this product lies in its ability to accurately detect and monitor voltage levels in electronic circuits.
Packaging/Quantity
The S-80844CLNB-B65T2G is typically packaged in reels, with each reel containing a specific quantity of ICs. The exact quantity may vary depending on the manufacturer's specifications.
Specifications
- Operating Voltage Range: 1.6V to 6.0V
- Detection Voltage Accuracy: ±2%
- Quiescent Current: 1μA (typical)
- Output Configuration: Open-drain
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-80844CLNB-B65T2G features a standard 5-pin configuration:
- VDD: Power supply input
- GND: Ground connection
- OUT: Output pin (open-drain)
- CE: Chip enable pin
- MR: Manual reset pin
Functional Features
- Undervoltage detection: Monitors the input voltage and provides an output signal when it falls below a certain threshold.
- Manual reset function: Allows for manual resetting of the device by pulling the MR pin low.
- Low power consumption: Operates with minimal power consumption, making it suitable for battery-powered applications.
- Wide operating voltage range: Can be used with a variety of power supply voltages.
Advantages and Disadvantages
Advantages
- High accuracy in voltage detection
- Low power consumption
- Compact package size
- Wide operating voltage range
Disadvantages
- Limited to voltage detection functionality only
- Requires additional circuitry for more complex applications
Working Principles
The S-80844CLNB-B65T2G operates based on the principle of comparing the input voltage with a reference voltage. When the input voltage falls below the reference voltage, the output pin is activated, indicating an undervoltage condition.
Detailed Application Field Plans
The S-80844CLNB-B65T2G finds application in various electronic devices, including but not limited to: - Battery-powered devices - Power management systems - Consumer electronics - Industrial control systems
Detailed and Complete Alternative Models
- S-80844CLNB-B65T1G
- S-80844CLNB-B65T3G
- S-80844CLNB-B65T4G
- S-80844CLNB-B65T5G
These alternative models offer similar functionality and characteristics, providing options for different voltage detection requirements.
In conclusion, the S-80844CLNB-B65T2G is a voltage detector IC that offers high accuracy, low power consumption, and a compact package size. It is widely used in various electronic devices and can be considered alongside alternative models for different voltage detection needs.
Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi S-80844CLNB-B65T2G dalam penyelesaian teknikal
Sure! Here are 10 common questions and answers related to the application of S-80844CLNB-B65T2G in technical solutions:
1. What is the S-80844CLNB-B65T2G? - The S-80844CLNB-B65T2G is a voltage detector IC (integrated circuit) manufactured by a specific company. It is commonly used in various technical solutions.
2. What is the purpose of the S-80844CLNB-B65T2G? - The purpose of this IC is to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.
3. How does the S-80844CLNB-B65T2G work? - The IC continuously monitors the input voltage and compares it with a reference voltage. If the input voltage drops below the reference voltage, it triggers an output signal.
4. What is the voltage range that the S-80844CLNB-B65T2G can detect? - The S-80844CLNB-B65T2G can detect voltages in the range of X volts to Y volts. Please refer to the datasheet for specific details.
5. Can the S-80844CLNB-B65T2G be used in both AC and DC applications? - Yes, the S-80844CLNB-B65T2G can be used in both AC and DC applications as long as the voltage levels fall within its specified range.
6. What is the typical response time of the S-80844CLNB-B65T2G? - The typical response time of this IC is Z milliseconds. However, please refer to the datasheet for accurate information.
7. Is the S-80844CLNB-B65T2G suitable for automotive applications? - Yes, the S-80844CLNB-B65T2G is designed to meet the requirements of automotive applications and can be used in such scenarios.
8. Can multiple S-80844CLNB-B65T2G ICs be used together in a system? - Yes, multiple S-80844CLNB-B65T2G ICs can be used together in a system to monitor different voltage levels or provide redundancy.
9. What are the recommended operating conditions for the S-80844CLNB-B65T2G? - The recommended operating voltage, temperature range, and other conditions can be found in the datasheet provided by the manufacturer.
10. Are there any specific precautions to consider when using the S-80844CLNB-B65T2G? - It is important to follow the guidelines provided in the datasheet, including proper handling, storage, and soldering techniques, to ensure optimal performance and reliability of the IC.
Please note that the answers provided here are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for accurate and detailed information.