ABLIC U.S.A. Inc.
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
S-80841CNY-B2-U
Lihat Butiran Helaian data

S-80841CNY-B2-U

Product Overview

Category

S-80841CNY-B2-U belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used as a voltage detector in various electronic devices.

Characteristics

  • Voltage detection range: 1.6V to 6.0V
  • Low current consumption: 1.0µA (typical)
  • High accuracy: ±2%
  • Built-in delay circuit: 200ms (typical)
  • Small package size: SOT-23-5

Package and Quantity

The S-80841CNY-B2-U is packaged in a SOT-23-5 package. It is available in tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Supply voltage range: 1.6V to 6.0V
  • Output voltage options: 2.3V, 2.4V, 2.5V, 2.6V, 2.7V, 2.8V, 2.9V, 3.0V, 3.1V, 3.2V, 3.3V, 3.4V, 3.5V, 3.6V, 3.7V, 3.8V, 3.9V, 4.0V, 4.1V, 4.2V, 4.3V, 4.4V, 4.5V, 4.6V, 4.7V, 4.8V, 4.9V, 5.0V, 5.1V, 5.2V, 5.3V, 5.4V, 5.5V, 5.6V, 5.7V, 5.8V, 5.9V, 6.0V
  • Operating temperature range: -40°C to +85°C

Pin Configuration

The S-80841CNY-B2-U has the following pin configuration:

```

| | --|----|-- |____| ```

  1. VDD (Supply Voltage)
  2. GND (Ground)
  3. OUT (Output)
  4. NC (No Connection)
  5. RESET (Reset Output)

Functional Features

  • Voltage detection with high accuracy and low current consumption
  • Built-in delay circuit for stable output
  • Reset output signal for system control

Advantages

  • Wide voltage detection range allows versatile applications
  • Low current consumption helps in power-saving designs
  • Small package size enables space-efficient PCB layout
  • High accuracy ensures reliable voltage detection

Disadvantages

  • Limited output voltage options may not suit all applications
  • No connection (NC) pin may require additional consideration during PCB design

Working Principles

The S-80841CNY-B2-U operates by comparing the input voltage with a reference voltage. When the input voltage crosses the threshold, the output changes state, indicating the detection of the desired voltage level.

Application Field Plans

The S-80841CNY-B2-U finds applications in various electronic devices where accurate voltage detection is required. Some potential application fields include: - Battery-powered devices - Power management systems - Consumer electronics - Industrial automation

Alternative Models

For alternative models with similar functionality, the following options can be considered: - S-80840CNY-B2-U - S-80842CNY-B2-U - S-80843CNY-B2-U - S-80844CNY-B2-U

These models offer different voltage detection ranges or package options, providing flexibility for specific application requirements.

In conclusion, the S-80841CNY-B2-U is a versatile voltage detector IC with high accuracy and low power consumption. Its small package size and wide voltage detection range make it suitable for various electronic devices. However, designers should consider the limited output voltage options and the no connection (NC) pin during their application-specific designs.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi S-80841CNY-B2-U dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of S-80841CNY-B2-U in technical solutions:

1. What is S-80841CNY-B2-U? - S-80841CNY-B2-U is a voltage detector IC (integrated circuit) manufactured by a specific company. It is commonly used in various technical solutions to monitor and detect voltage levels.

2. What is the operating voltage range of S-80841CNY-B2-U? - The operating voltage range of S-80841CNY-B2-U is typically between 1.6V and 6.0V.

3. How does S-80841CNY-B2-U work? - S-80841CNY-B2-U works by monitoring the input voltage and providing a digital output signal when the voltage exceeds or falls below a certain threshold level.

4. What is the output format of S-80841CNY-B2-U? - The output format of S-80841CNY-B2-U is typically a digital signal, either high or low, indicating the voltage status.

5. Can S-80841CNY-B2-U be used for overvoltage protection? - Yes, S-80841CNY-B2-U can be used for overvoltage protection by setting the appropriate threshold voltage level and triggering an action when the voltage exceeds that level.

6. Is S-80841CNY-B2-U suitable for battery-powered applications? - Yes, S-80841CNY-B2-U is suitable for battery-powered applications as it has a low operating voltage range and consumes very low power.

7. Can S-80841CNY-B2-U be used for undervoltage detection? - Yes, S-80841CNY-B2-U can be used for undervoltage detection by setting the appropriate threshold voltage level and triggering an action when the voltage falls below that level.

8. What is the typical response time of S-80841CNY-B2-U? - The typical response time of S-80841CNY-B2-U is very fast, usually in the range of microseconds.

9. Can S-80841CNY-B2-U be used in automotive applications? - Yes, S-80841CNY-B2-U can be used in automotive applications as it meets the necessary requirements for voltage monitoring and protection.

10. Are there any specific precautions to consider while using S-80841CNY-B2-U? - It is recommended to follow the manufacturer's datasheet and guidelines for proper usage of S-80841CNY-B2-U. Additionally, ensure correct voltage levels, proper grounding, and thermal considerations for reliable operation.

Please note that the answers provided here are general and may vary depending on the specific application and requirements.